C/O HP PWD Division office building at Bhanjraru in Tehsil Churah Distt. Chamba (HP) (SH- Providing E.I. therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

( Make:- Legrand (Myrius), L&T(Entice), Anchor Roma (Plus)

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

( Make:- Legrand (Myrius), L&T(Entice), Anchor Roma (Plus)

Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

(Make:- KEI, SCI,Havells

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/ PVC insulated single core copper conductor cable for earthing as required.

(Make:- KEI, SCI,Havells

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

(Make:- KEI, SCI,Havells

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Make:- KEI, SCI,Havells

PVC insulated HRFR LS Copper conductor 1.5 Sq. mm.

3x1.5 Sq. mm.

3x2.5 Sq. mm.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.( Make:- Legrand (Myrius), L&T(Entice), Anchor Roma (Plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.( Make:- Legrand (Myrius), L&T(Entice), Anchor Roma (Plus)

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-( Make:- Legrand (Myrius), L&T(Entice), Anchor Roma (Plus)

2 modules (78mmx78mmx50mm)

12 modules (205mmx135mmx60mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. ( Make:- Legrand (Myrius), L&T(Entice), Anchor Roma (Plus)

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Telephone socket outlet, piano type.

Supplying and drawing LAN cable CAT 6, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Make:-KEI/Anchar/D-Link or its equivalent make.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-(Make:- Diplast, BEC, Finolex)

25 mm. dia

50 mm. dia

Supplying and fixing RJ 45 Jack with cat 6 in the existing switch box / cover plate including connections etc. as required.

RJ 45 Jack with cat 6 (1 moudule) Makes:- Legrand Mylinc/L&T /Schneider.

Cat. No.: 6759 67

Supplying and fixing Computer Network Switch 1000 (MBPS) million bits or 1000 Kilo bits of data per second complete with all accessories, connections, testing and commissioning etc. as required. Make: D-Link or any other approved by Engineer-in-Charge.

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. (Make:- Usha,Bajaj,Crompton)

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

1200 mm sweep Make:- Usha (Technix Plus 3 Star) / (Bajaj (Ultima)/Crompton Greaves

1400 mm sweep Make:- Usha (Striker 1 Star) / (Bajaj (Ultima)

Supplying and fixing surface mounting following size LED solution suitable for surface application with the use of the latest technology 6/12/18 Watt (600/1200/1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

Make:-Jaquar/Panasonic/ Wipro/philips.

LED 12 Watt Square (L x W: 175 mm x 175MM. Height: 35 mm)

Cat No: LNRO02S012SC

LED 18 Watt Square (L x W: 225 mm X 225MM. Height: 35 mm)

Cat No: LNRO02S018SC

Supplying and fixing surface mounting following size LED solution suitable for surface application with the use of the latest technology 20,36,42 Watt (2000,3600,4200 lumen) 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

Make:-Jaquar/Panasonic/ Wipro/philips.

Sauver (Surface)-20W/1ft.x1ft.

Cat No:LSVR01S020XC

Sauver (Surface)-36W/2ft.x2ft.

Cat No:LSVR01S036SC

Sauver (Surface)-42W/1ft.x4ft.

Cat No:LSVR003S042XC

Supplying and fixing recess mounting following size LED solution suitable for surface application with the use of the latest technology 36 Watt (3600 lumen) 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.

Make:-Jaquar/Panasonic/ Wipro/philips.

Sauver (Recess)-36W/2ft.x2ft.

Cat No:LSVR01S036XC

Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 20Watt (2000 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 20 Watt complete with all accessories, connections, testing and commissioning etc. as required.

Make:-Jaquar/Panasonic/ Wipro/philips.

LED Tube Fixture 20Watt (L x W:1135 x22mmHeight:37mm)

Cat No: LGLZ01X020XC

Supplying and fixing fancy wall bracket of metal & synthetics white colour of superior quaility with E27 lamp holder complete with all accessories,including making connections, testing etc. including 5 year warrenty as required.. Make- Jaquar,Panasonic,Wipro

Fixed type wall bracket

Cat No: JNL-CHR-WLRB0480SE27

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing of stair way wall bracket containing one No. thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Stair way wall bracket.(Category-A)

Providing and fixing Bulk Head Fitting with high efficacy up to 10Watt (1000 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 20 Watt complete with all accessories, connections, testing and commissioning etc. including 5 year warrenty as required.as .Make:-Jaquar/Panasonic/ Wipro, Philips

LED Bulk head 10Watt Cat No: LBLK02X010XC

Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 10Watt (Mirror Light)(1000 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 20 Watt complete with all accessories, connections, testing and commissioning etc. as required. Make- Jaquar,Panasonic,Wipro

Mirror lightLED 10Watt (L x W: 595 x22mm Height:37mm)

Cat No: LGLZ01X010XC

Supplying and fixing LED retrofit lamp suitable for B-22 holder base fittings with polycarbonate diffuser and aluminium heat sink as required complete in all respects.

9Watt LED, B-22

Makes:- C&S (Cat.No.LTHPLEDLAMP 9W/ B22) /Panasonic/ Osram or its equivalent make.

Supplying and fixing 32 Amp. power unit (with cable output) for geyser/ Air Conditioner including connections, installation, testing and commissioning etc. as required and to the best satisfaction of Engineer-in-charge.

32 Amps. Power Unit

Make:- Legrand (Myrius)/ L&T(Entice)/Anchor Roma (Plus)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- Make- Recold/Bajaj/Crompton

25 Liter capacity water heater (Cat-A)

Supplying, installation testing and commissioning of 2.00 Ton capacity split type (Hot & Cold) Air Conditioning unit of following make confirming to I.S.I.-1391 Established since1884 with ammendment No.1(except power consumption norms) fitted with hermatically shielded air compressor as required complete in all respects:-

2.00 Ton capacity split type (Hot & Cold) Air Conditioning unit.

Make:- Voltas Model No.Voltas SAC 243VH SZS (Cat. No.4502742) or equivalent make.

Providing and installation of copper pipe of size (3/8'x5/8') suitable for 2.00 Ton A.C. with insulation held properly by means of clamps and making good the damages complete in all respects as required at the site.

Providing and installation of Stand suitable for hanging 2.0 Ton A.C. out door unit including embedding bolts in the wall and making good the damages complete in all respects as required at the site.

Providing and installation of PVC drain pipe of size (25mm dia) with elbow and tee held properly by means of clamps and making good the damages complete in all respects as required at the site.

Supplying and fixing wall mounting voltage stablizer (Microtek Make) automatic type with output 240 Volts,voltage regulator range from 150 Volt to 290 Volts amd auto cut of beyond this range and time delay operation for surges and flutations suitable for 2.0 Ton capacity split AC making connection etc. as required.

Microtek stablizer 150-290V. 4 KVA

Make:-Microtek (CAT No: EM5150+) Upto 2.0ton AC or equivalent make.

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 50 mm x 50 mm x 6 mm thick duly welded complete with 3mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Make:- L&T/ Legrand/ Schneider

Double door-4 way

Double door-6 way

Double door-8 way

Double door-12 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole in the existing MCB DB complete with connections etc. as required:- Cat-A.Make:- L&T/ Legrand/ Schneider

Supplying and fixing 40 Amps. rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required:- Cat-A. Make:- L&T/ Legrand/ Schneider

Supplying and fixing 63 Amps. rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required:- Cat-A.Make:- L&T/ Legrand/ Schneider

Supplying and fixing 40Amps. rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required : Cat-A.Make:- L&T/ Legrand/ Schneider

Supplying and fixing 63 Amps. rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required : Cat-A.Make:- L&T/ Legrand/ Schneider

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Make:- L&T/ Legrand/ Schneider

Triple pole & Neutral. Cat-A.

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx 350mmx 50mm) nominal with all accessories including connections, earthing the body etc. as required:-Make:- L&T/ Legrand/ Schneider

Supply,fabirication,installation,testing,commissioning and electrically connected Factory (CPRI approved) made,LT panel Board of approved size as recommended by IS & CPRI norms,indoor type,Floor Mounted 1000 Volt,made out off CRCA sheet 2.0mm thick for load bearing and and 1.6mm IP-54 (certificate not older than 2 year) protection with base frame of 5mm thick chanel for frame,for 415 volts,3 phase,4 wire AC supply,complete all as specified including provision of following accessary/components housed in -: (i) 250 Amps rated copper bus bar with colour code TPN mounted on epoxy insulator : 01 set (set for 04 bus bar. (ii) Digital Multification metre 0.100Amps with Suitable CT's-01 set. (iii) LED indicating lamp (set of three)- 01 Set. (iv) Internal wiring with 1100 volt grade unsheahed PVC insuladed copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable iugs as required and as per specified. (v) Earthing teminals and cable glands. (vi) Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Make:- EVA/Power system control/DB Electromatic Pvt. Ltd Make.or equivalent with relevant ISI specification and CPRI approved.

The Panel shall include the following Switchgear & accessories; as per the Make of L & T,Schneider, C&S etc.

Main Incomers -1

MCCB 250 Amps, 4P 25ka Adj.T MCCB.(Spreader Links Inc.) - 1 No.

Outgoing Feeders -1

100 Amps 4P 16ka Fixed MCCB.(Spreader Links Inc.) . - 3 No.

63 Amps 4P 16ka Fixed MCCB.(Spreader Links Inc.) . - 1 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Sub Panel for floor

Supply,fabirication,installation,testing,commissioning and electrically connected Factory (CPRI approved) made,LT panel Board of approved size as recommended by IS & CPRI norms,indoor type,Floor Mounted 1000 Volt,made out off CRCA sheet 2.0mm thick for load bearing and and 1.6mm IP-54 (certificate not older than 2 year) protection with base frame of 5mm thick chanel for frame,for 415 volts,3 phase,4 wire AC supply,complete all as specified including provision of following accessary/components housed in -: (i) 63 Amps rated copper bus bar with colour code TPN mounted on epoxy insulator : 01 set (set for 04 bus bar). (ii) Earthing teminals and cable glands. (iii) Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Make:- EVA/Power system control/DB Electromatic Pvt. Ltd Make.

The Panel shall include the following Switchgear & accessories; as per the Make of L & T,Schneider, C&S etc.

Incoming-:

(1) MCCB 100 Amps,4Pole,Adjustable thermal and fixed magnetic setting repture capacity 16 ka-3No.

Sub Panel for floor

Supply,fabirication,installation,testing,commissioning and electrically connected Factory (CPRI approved) made,LT panel Board of approved size as recommended by IS & CPRI norms,indoor type,Floor Mounted 1000 Volt,made out off CRCA sheet 2.0mm thick for load bearing and and 1.6mm IP-54 (certificate not older than 2 year) protection with base frame of 5mm thick chanel for frame,for 415 volts,3 phase,4 wire AC supply,complete all as specified including provision of following accessary/components housed in -: (i) 63 Amps rated copper bus bar with colour code TPN mounted on epoxy insulator : 01 set (set for 04 bus bar). (ii) Earthing teminals and cable glands. (iii) Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.

Make:- EVA/Power system control/DB Electromatic Pvt. Ltd Make.

The Panel shall include the following Switchgear & accessories; as per the Make of L & T,Schneider, C&S etc.

Incoming-:

(2) MCCB 63 Amps,4Pole,Adjustable thermal and fixed magnetic setting repture capacity 16 ka-1No.

Outgoing:-

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Make:- KEI/SCI/Havells.

Armoured cable 70 sq. mm (3.5 core)

Malhotra Associates

JAMWAL ELECTRICAL WORKS