Homeopathy Dispensary at Badatota_building

Filling in foundation trenches with approved quality of sand as per deawing and technical specification clause 1108, 305.3.9 & 1200 of MORD etc. complete as per direction of the Engineer-in-charge.

Plain cement concrete M-15 grade in Foundation complete as per drawing and technical specification etc. complete as per direction of the Engineer-in-charge.

Construction of un-reinforced, plain cement as concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 etc. complete as per direction of the Engineer-in-charge.

4 cm thick Grading concrete in CC (1:2:4) over roof slab with 12 mm & down graded size black hard granite chips including all cost and conveyance, royalty, taxes of all materials etc. complete as per direction of the Engineer-in-charge.

6mm thick cement plaster (1:4) over R.C.C surface including all cost and conveyance, royalty, taxes of all materials etc. complete as per direction of the Engineer-in-charge.

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete as per direction of the Engineer-in-charge.

Wall painting two coats over intrior wall surface with Plastic Paint of approved shade over a coat of Primer including cost and conveyance of all materials to site, and all labour charges etc. complete as per direction of the Engineer-in-charge.

Painting two coats with approved weather seal coat over new work including cost and conveyance of all materials to site, and all labour charges etc. complete as per direction of the Engineer-in-charge.

Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge.