Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC ok | |
| 2 | L2₹33.9 L+₹2.2 L (6.81%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹38.3 L+₹6.6 L (20.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹38.5 L+₹6.8 L (21.3%)Rejected-Finance JODHPUR ROAD UTARLAI BARMER RAJ 344035 | BARMER | RAJASTHAN | 344035 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
15 Nov 2021, 6:00 pmClosed
GE (AF) UTARLAI
GE (AF) UTARLAI, PB NO 11, BARMER (RAJ) 344001
REPAIR AND MAINTENANCE OF DG SETS, AMF PANELS AND CERTAIN ASSOCIATED WORKS AND REPAIR TO MAINT GANTRIES AND ALLIED WORKS AT AF STN UTARLAI
2021_MES_482490_1
8236/05/E8 dt 18 Oct 2021
Open Tender
Civil Works
Item Rate
330 days
GE (AF) UTARLAI
As Per NIT
7 documents required · 7 mandatory
₹500
Yes
GE (AF) UTARLAI
₹70,000
Yes
30 Dec 2021
18 Oct 2021
22 Nov 2021
18 Oct 2021
15 Nov 2021
1 Nov 2021
Amount
M&L for monthly 'A' Check Inspection of DG sets of capacities as described in Ser Item No. 2.00 to 25.00 including alternator, electric panel board connection to DG set etc for smooth functioning and carrying out maintanance as required at site and directed by Engr-in Charge. Note: Items/ Spares required shall be measured and paid separately under respective item of BoQ
Checking engine oil level and topping up as and when required.
Checking and adjusting the belt for tension and replacement of belt if required.
Checking of oil bath air cleaner level
Checking of exhaust system for leakage
Draining of sediment from fuel filter and fuel tank
Cleaning of air cleaner elements
Checking engine alternator coupling, mounting bolts and alignment
Tighting all nuts, bolts, in altenator terminal block
Checking of alternator carbon brushes and connections in alternator
Checking and tightening of all connection in DC control wiring.
Checking of all radiator rubber hoses for leakage and replacement if required.
Checking and recording oil pressure, water and oil temperarute for smooth functioning.
Checking anti vibration mounting pads for any deformation.
Checking throttle linkage for smooth operation.
Checking battery for cell test, electrolyte level, gravity and topping up to required level
Routine check / repair work of panel, switches, MCCBs, main switch, all contactors, engine control unit etc.
Checking of AMF panel, all electrical connections etc.
Checking of earthing resistance
Cleaning of vegitation around the DG set up to 1.5 mtr area.
'A' Check Service shall be carried out as described in ser No. 2.00 to 25.00
125 KVA Capacity, Make : Ashok Layland, Model LP 125, Location : SMC
100 KVA Capacity, Make : Cummins, Model SGL 100, Location : Gupta Pump House
250 KVA Capacity, Make : Kirloskar, Model 6SL8800TA, Location : Auditorium
320 KVA Capacity, Make : Kirloskar, Location : Bison hanger
100 KVA Capacity, Make : Kirloskar, Model 6KSWATC 105, Location : 175 SU
40 KVA Capacity, Make : Ashok Layland Model ALGDW4DMKIEE, Location : 307 TRU
75 KVA Capacity, Make : Kirloskar Model KG 75 WS, Location : AF Net S/S
100 KVA Capacity, Make : Kirloskar, Model 6R1080 T, Location :STP
82.5 KVA Capacity, Make : Kirloskar Model 4R 1040 TA , Location : PEB Hanger 4 Sqn
100 KVA Capacity, Make : Greaves Model 4G11TAG23, Location : Roll Equipment Shelter
125 KVA Capacity, Make : Cummins Model UCI 274VI, Location : SRE
40 KVA Capacity, Make : Cummins Model S3.8G4, Location : OTES Hall
62.5 KVA Capacity, Make : Ashok Layland Model AL4DTG3, Location : Base Ops
320 KVA Capacity, Make : Kirloskar, Model DV8 SR1, Location : New ATC
125 KVA Capacity, Make : Ashok Layland, Model AL6 DTIG2, Location : Porta cabin
100 KVA Capacity, Make : Kirloskar Model KG 100 WS , Location : Old ATC
62.5 KVA Capacity, Make : Cummins Model S3.8G7, Location : Perimeter Lights (04 Nos)
100 KVA Capacity, Make : Ashok layland Model AL6 DTIG1, Location : Bison APTT
40 KVA Capacity, Make : Ashok Layland Model CSH.A/40/TP, Location: 02 & 20 Ends (02 Nos)
125 KVA Capacity, Make : Greaves, Location :PS-II
15 KVA Capacity, Make : Cummins Location : Logistic section
225 KVA Capacity, Make : Cummins Location :Bumb Dump (WSA)
100 KVA Capacity, Make : Ashok leyland Location : Base ops TWCC
63 KVA Capacity, Make : Kisloskar Location : 175 Su pump house
M&L for 'B' Check once in Six month OR 250 Hrs running whichever is earlier DG sets of capacities as described in Ser Item No 28.00 to 51.00 Inspection, maintenance and serviceing including alternator, electric panel board connection to DG set etc for smooth functioning and carrying out maintenance as per OEM instructions and as directed by Engr-in-Charge. Note:Items/ Spares including 'B' Check kit, coolent, lubricating oil required shall be measured and paid separately under respective item of BoQ
Repeat the activities of 'Á' Check services
Replacement of lubricant oil.
Replacing lubricant oil filters element with O rings
Replacing fuel filters element with O rings
Replacing air filter elements with O rings
Replacing coolant.
B' Chech Service shall be carried out as described in Ser Item No. 28.00 to 51.00
125 KVA Capacity, Make : Ashok Layland, Model LP 125, Location : SMC
100 KVA Capacity, Make : Cummins, Model SGL 100, Location : Gupta Pump House
250 KVA Capacity, Make : Kirloskar, Model 6SL8800TA, Location : Auditorium
320 KVA Capacity, Make : Kirloskar, Location : Bison hanger
100 KVA Capacity, Make : Kirloskar, Model 6KSWATC 105, Location : 175 SU
40 KVA Capacity, Make : Ashok Layland Model ALGDW4DMKIEE, Location : 307 TRU
75 KVA Capacity, Make : Kirloskar Model KG 75 WS, Location : AF Net S/S
100 KVA Capacity, Make : Kirloskar, Model 6R1080 T, Location : STP
82.5 KVA Capacity, Make : Kirloskar Model 4R 1040 TA , Location : PEB Hanger 4 Sqn
100 KVA Capacity, Make : Greaves Model 4G11TAG23, Location : Roll Equipment Shelter
125 KVA Capacity, Make : Cummins Model UCI 274VI, Location : SRE
40 KVA Capacity, Make : Cummins Model S3.8G4, Location : OTES Hall
62.5 KVA Capacity, Make : Ashok Layland Model AL4DTG3, Location : Base Ops
320 KVA Capacity, Make : Kirloskar, Model DV8 SR1, Location : New ATC
125 KVA Capacity, Make : Ashok Layland, Model AL6 DTIG2, Location : Porta cabin
100 KVA Capacity, Make : Kirloskar Model KG 100 WS , Location : Old ATC
62.5 KVA Capacity, Make : Cummins Model S3.8G7, Location : Perimeter Lights (04 Nos)
100 KVA Capacity, Make : Ashok layland Model AL6 DTIG1, Location : Bison APTT
40 KVA Capacity, Make : Ashok Layland Model CSH.A/40/TP, Location: 02 & 20 Ends (02 Nos)
125 KVA Capacity, Make : Greaves, Location :PS-II
15 KVA Capacity, Make : Cummins Location : Logistic section
225 KVA Capacity, Make : Cummins Location :Bumb Dump (WSA)
100 KVA Capacity, Make : Ashok leyland Location : Base ops TWCC
63 KVA Capacity, Make : Kisloskar Location : 175 Su pump house
Supply only 'B' check kit for DG set of following capacities as mentioned in respective Ser Item No. 52.01 to 52.24 Note : It includes oil filters (1.00 Ltr/0.5 ltr), Diesel filters and air filters inner and outer as recommended by OEM
125 KVA Capacity, Make : Ashok Layland, Model LP 125, Location : SMC
100 KVA Capacity, Make : Cummins, Model SGL 100, Location : Gupta Pump House
250 KVA Capacity, Make : Kirloskar, Model 6SL8800TA, Location : Auditorium
320 KVA Capacity, Make : Kirloskar, Location : Bison hanger
100 KVA Capacity, Make : Kirloskar, Model 6KSWATC 105, Location : 175 SU
40 KVA Capacity, Make : Ashok Layland Model ALGDW4DMKIEE, Location : 307 TRU
75 KVA Capacity, Make : Kirloskar Model KG 75 WS, Location : AF Net S/S
100 KVA Capacity, Make : Kirloskar, Model 6R1080 T, Location :STP
82.5 KVA Capacity, Make : Kirloskar Model 4R 1040 TA , Location : PEB Hanger 4 Sqn
100 KVA Capacity, Make : Greaves Model 4G11TAG23, Location : Roll Equipment Shelter
125 KVA Capacity, Make : Cummins Model UCI 274VI, Location : SRE
40 KVA Capacity, Make : Cummins Model S3.8G4, Location : OTES Hall
62.5 KVA Capacity, Make : Ashok Layland Model AL4DTG3, Location : Base Ops
320 KVA Capacity, Make : Kirloskar, Model DV8 SR1, Location : New ATC
125 KVA Capacity, Make : Ashok Layland, Model AL6 DTIG2, Location : Porta cabin
100 KVA Capacity, Make : Kirloskar Model KG 100 WS , Location : Old ATC
62.5 KVA Capacity, Make : Cummins Model S3.8G7, Location : Perimeter Lights (04 Nos)
100 KVA Capacity, Make : Ashok layland Model AL6 DTIG1, Location : Bison APTT
40 KVA Capacity, Make : Ashok Layland Model CSH.A/40/TP, Location: 02 & 20 Ends (02 Nos)
125 KVA Capacity, Make : Greaves, Location :PS-II
15 KVA Capacity, Make : Cummins Location : Logistic section
225 KVA Capacity, Make : Cummins Location :Bumb Dump (WSA)
100 KVA Capacity, Make : Ashok leyland Location : Base ops TWCC
63 KVA Capacity, Make : Kisloskar Location : 175 Su pump house
Supply only coolent, K cool super plus 50-50 Premix
Supply only Battery water with electrolyte mix
Supply only Engine oil 15 W 40 turbo synthetic superior quality engine oil
Supply only radiator hose pipe set with clamps suitable for DG set of capacity 40 /63 KVA
Supply only radiator hose pipe set with clamps suitable for DG set of capacity 100 /125 KVA
Supply only radiator hose pipe set with clamps suitable for DG set of capacity 160/250 KVA
Supply only radiator hose pipe set with clamps suitable for DG set of capacity 320 KVA
Supply only fan belt set suitable for 40/63 KVA
Supply only fan belt set suitable for 100/125 KVA
Supply only fan belt set suitable for 160/250 KVA
Supply only fan belt set suitable for 320 KVA
Supply and fixing in replacement of battery lead with Negative & Positive brass terminals of suitable size and length of each lead all as directed
Servicing & repair to self starter of DG set of 16 KVA to 320 KVA 12/24 volt system incl replacement of parts such as washer, nut, bolts, bush, solonoid, rotor etc. assembling and testing complete all as directed by Engr-in-Charge.
Supply & Fix in replacement of battery 12 V, 100 AH, maintenance free battery, 12 Volt initially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-Charge. Make: Excide/ Amron/ Luminous
Supply & Fix in replacement of battery 12 V, 150 AH, maintenance free battery, 12 Volt initially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-Charge. Make: Excide/ Amron/ Luminous
Supply & Fix in replacement of battery 12 V, 180 AH, maintenance free battery, 12 Volt initially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-Charge. Make: Excide/ Amron/ Luminous
M & L for complete checking of AMF panel, finding the fault, servicing complete including replacement of unserviceable spares with necessary wiring and testing complete for manual & Auto operations all as directed. (Note:- Items required for replacement will be measured & paid seperately under respective item of BoQ)
Supply only in replacement of AMF panel under and over voltage timing relay as per existing type, make and capacity
Supply only in replacement of AMF panel timer relay for circuit 230 V AC supply as per existing type, make and capacity
Supply only in replacement of AMF panel relay card 12 V DC supply for change over as per existing type, make and capacity
Supply only in replacement of AMF panel relay single with batch 8 pin 230 V AC supply as per existing type, make and capacity
M&L for replacement of unserviceable contactor 220 V AC supply, 4 pole suitable for the following capacity of DG set AMF panel:-
DG set 320 KVA
DG set 250 KVA
DG set 225 KVA
DG set 160 KVA
DG set 100 KVA
DG set 75 KVA
DG set 63 KVA
DG set 40 KVA
M&L in replacement of Start/ Stop switch with elements of AMF panel of any make and capacity.
M&L in replacement of solenoid switch for use of engine stop of AMF panel of any make and capacity.
M&L in replacement of Volt meter digital type of range 0-500 volts of AMF panel
M&L in replacement of Amp meter digital type of existing make,model and capacity of AMF panel
M&L in replacement of Indicator lamp 230 V AC Supply of AMF panel
M&L in replacement of battery charger 12 V DC SMPS 10 Amp for AMF panel
M&L in replacement of battery charger 24 V DC SMPS 10 Amp for AMF panel
Supply only in replacement of AMF panel control unit as per existing type, make and capacity
M & L for repair and replacement of broken conopy door hinges of DG set of any capacity and make. Setting of conopy door, properly locking arrengement complete all as directed by Engr-in Charge
S & F in replacement of fuel feed pump of DG Set engine as per existing make, model and capacity complete all as directed by Engineer-in-Charge.
S & F in replacement of NRV of DG set engine as per existing make, model complete all as directed by Engineer-in-Charge.
S & F in replacement of fuel level gauge of DG set as per existing make, model complete all as directed by Engineer-in-Charge.
M & L for dismantling, transportation to workshop and back, opening, rewinding main winding assembly and refixing DG set of 40 KVA Capacity, Make : Ashok Layland Model ALGDW4DMKIEE, Location : 307 TRU alternater, three phase, 415 V, 50 Hz with super enameled copper wire of existing gauge and existing class insulation including superior quality varnishing, heating / drying coils, making connections from coil to terminal box, spray painting with two coats of synthetic enamel paint inclluding repair/replacement of diode plates for neutral & phase and repair / replacement of AVR, connecting, testing and commissioning at site for satisfactorily operation as required and directed by Engr-in-Charge..
S & F in replacement of Alternator connection terminal block suitable for 15 to 320 KVA DG Set alternetor as per existing sample complete all as directed by Engr-in Charge.
S & F in replacement of Controller unit suitable for DG Set having capacity 15-320 KVA. Make of controller as per DG set complete all as specified and directed by Engr-in-Charge.
M & L in replacement of battery stand frame of size 4 feet x 1.5 feet with height of 1 feet made of 50x50x6mm angle iron and support with flat iron of size 40x6mm, duly painted, 20 mm wooden plank on top to place 02 Nos batteries complete all as directed by Engr-in-Charge.
M&L for taking the Diesel Generating set from to workshop Jodhpur where repair to be carried out safely, dismantling the engine completery for repair and top over hauling of Diesel Generating set 100 KVA capacity any make carry our required repair as per manufacture instuction including replacement of all defective parts as required for smooth functioning of the DG set complete.
Supply only the following U/S parts/components for fixing under ser item No 44 here-in-before
Cylinder Liners complete
Piston assly complete with gudgeon pin and ring set with 'O' rings.
Valve inlet and exhaust, valve sheet and valve guide
Push Rods
Connecting Rod Bushes
Rocker arm bushes
Engine gasket set complete
Gasket set cylinder head complete
Set of Joints
RRA Assy
Valve Seal
Oil Seal
Following repairs also to be carried out under Ser item No 92.00 here-in-before
Repair to charging alternator assembly including replacement of carbon brushes and bushes complete and refixing all the components in position with necessary screws, nuts & bolts complete all as directed.
Repair to self starter 12 Volts including replacement of armature, union, carbon bushes complete and refixing all the components in position with necessary screws, nuts & Bolts complete all as directed.
M&L for servicing / cleaning of air intake manifold assy with requsite tools and air pressure to remove dirt & foreign pairtcle completetly including replacement / repair to fiexible coupling of silencer / exhaust manifold to ensure no leakage of exhaust inside the canopy complete all as directed.
M&L for cleaning / derusting for inner cushion foam (insulation) of all inside canopy to achieve neat & cleanliness of gererating cabin with requisite air blower / dust sucker suitable for the job complete all as directed.
M&L for replacment of dioade, DE and NDE bearing of AC generator and varnishing field coil and armature assy complete all as directed.
M & L for painting of outer surface only of canoply acquisite of generating set inculding cleaning and derusting and preperation of painting with requisite tools and painting with white bright super enamel / synthetic paint colour including rewriting of machine no complete all as directed.
M & L for leakage rectification of radiator, cleaning, pressure testing complete as required and directed.
Testing and tunning of DG set with load test complete all as directed by Engr-in-Charge.
S& F in replacement of power contactor of capacit y 63 Amp, 3 pole suitable for EOT crane 2 / 5Tonne capacity.
S& F in replacement of thermal over load relay upto 14.5 Amp capacity.
S& F in replacement of brake shoe liner for EOT cranes of any capacity of existing makeand model.
S& F in replacement of wheel bearing for EOT cranes (LT) upto 2.0Ton capacity Make: NBC/SKF
S& F in replacement of wheel bearing for EOT cranes (LT) upto 5.0 Ton capacity Make: NBC/SKF
S& F in replacement of wheel bearing for EOT cranes (CT) upto 2.0 Ton capacity Make: NBC/SKF
S& F in replacement of wheel bearing for EOT cranes (CT) upto 5.0 Ton capacity Make: NBC/SKF
S& F in replacement of wheel bearing for EOT cranes (LT) upto 2.0 Ton capacity Make: NBC/SKF
S& F in replacement of wheel bearing for EOT cranes (LT) upto 5.0 Ton capacity Make: NBC/SKF
S& F in replacement of DSL collectors of 16 Amp capacity for EOT cranes of existing make
S& F in replacement of DSL collectors of 32 Amp capacity for EOT cranes of existing make
S& F in replacement of HRC fuses of 6-10 Amp capacity for EOT cranes. Make: Siemens/L&T/Schneider
S& F in replacement of PVC sheathed multistranded flexible copper cable of 3 core 2.5 sqmm 1100 volt grade for EOT crane.
S& F in replacement of PVC sheathed multistranded flexible copper cable of 3 core 4.0 sqmm 1100 volt grade for EOT crane.
S& F in replacement of PVC sheathed multistranded flexible copper cable of 4 core 6.0 sqmm 1100 volt grade for EOT crane.
S& F in replacement of PVC sheathed multistranded flexible copper cable of 4 core 10.0 sqmm 1100 volt grade for EOT crane.
S& F in replacement of carbon brushes for hoist creep motor as per the existing design, suitable for EOT crane upto 5 tonne capacity of existing make
S& F in replacement of MS coupling bolts & nuts as per the existing design and as directed.
S& F in replacement of steel wire rope 12mm dia for EOT crane existing make
M & L for Refilling of grease including cleaning of old grease complete all as specified and directed.
M & L for filling of gear oil SP 320 including taking out old gear oil complete all as specified and directed.
S & F replacement of electrical pendent push buttons with NO/NC contacts elements for EOT cranes of any capacity
M&L for alignment of EOT crane tracks on both sides including gas cutting and welding and grinding for smooth functioning of crane travel complete all as specified.
M&L for rectification of oil leaking from LT gear box of EOT crane by replacing spares such as oil seals etc for EOT crane, complete all as specified.
M&L for dismantling motors upto 1.5 KW capacity from EOT crane taking down and carry to workshop, rewinding with existing guage of super enamelled copper winding wire of superior quality with proper insulation and bringing back and refixing on crane with proper alignment with gear box etc, including testing on completion, complete all as directed by Engineer-in-Charge.
Description all as per serial item No. 120 here in before but for motors above 2KW to 3.5KW capacity, complete all as directed by Engineer-in-Charge
M&L for dismantling electric magnetic brack coil from crane of any capacity, taking down and carry to work shop, rewinding with existing guage of super enamelled copper winding wire of superior quality with proper insulation and bringing back and refixing on crane with proper alignment with gear box etc, including testing on completion, complete all as directed by Engineer-in-Charge.
M&L for replacement of gear wheel shaft for crane upto 2.0 Ton capacity, taking down, servicing of gear box, greasing etc and refixing of crane with proper alignment etc, including testing on completion, complete all as directed by Engineer-in-Charge.
M&L for replacement of gear wheel shaft for crane upto 5.0 Ton capacity, taking down, servicing of gear box, greasing etc and refixing of crane with proper alignment etc, including testing on completion, complete all as directed by Engineer-in-Charge.
S& F in replacement of limit switch for EOT cranes of any type capacity and existing make complete all as specified and directed.
Taking down old unsv gears, pinion, warm gear, padestal bearing etc and Supply and fixing new gears, pinion, warm gear, padestal bearing, oil seals, packings etc of the cranes suitable for 2 Ton capacity including all other accessories, fixtures, nut, bolts & washers as required for fixing gears, gear oil (Gear oil 320) complete all as specified and directed.
National Rewinding Works
M.D. CONSTRUCTION CO.
M/s godara infratech and power industries
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .