Loading
Loading…
Loading…
Tender Value
₹3.9 Cr
EMD Value
₹3.4 L
Closing Date
6 Apr 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
TENDER SEC
24 conditions · 5 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees and N= Number of yearsprescribed for completion of work for which bids have been invited. The average annualcontractual turnover shall be calculated as an average of "total contractual payments" inthe previous three financial years, as per the audited balance sheet. However, in casebalance sheet of the previous year is yet to be prepared/ audited, the audited balance Sheet of the fourth previous year shall be considered for calculating average annual Contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, long with copies of Audited Balance Sheets duly certified by the CharteredAccountant/ Certificate from Chartered Accountant duly supported by Audited BalanceSheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
b) Audited Balance Sheets clearly indicating contractual receipts from the works done for Govt./ Govt. bodies / PSUs/Pvt. Organization in the P&L Account of the balance sheet duly certified by the Chartered Accountant for the completed Financial years. For the current financial year, Provisional Balance sheet issued by Chartered Accountant, clearly indicating contractual receipts.NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC- 2022 [with up to date correction slip]
Definition of Similar nature of work: Execution of indoor work ( hardware/software ) of same make of EI as existing one. Note:- The tenderer should be either Existing EI's Siemens or OEM (Siemens) authorized/supported. Tender shall submit an undertaking with either OEM or OEM (Siemens) authorized/supported agency for installation, testing and commissioning (including after sales support during the warranty period).
82 conditions · 11 needing a document upload
Have you submitted documents pertaining to status/contribution of the firm, partnership deed and power to attorney
Have you furnished full postal address, telephone number/Fax number
Have you submitted document of current income Tax Clearance Certificate
Have you submitted your offer inclusive of ED and all other Taxes and duties for the entire schedule
Have you registered with Assistant Labour Commissioner of the area where the work will be done. Necessary license to be submitted with the tender or to be produced before signing of the Contact Agreement.
Have you attested all the corrections
Have you submitted the bids containing Check List, Tender Notice, Declaration form, Instructions to Tenderers, Special Conditions of Contract, Technical Specifications, Annexures, schedule of Works & Offer.
Cost of tender document & EMD deposited through IREPS e- payment.
In case of Partnership firm : The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (No 8.2.1 Technical credentials are required for tenders having value up to Rs 50 lakh).
Submission of Certificate(s) in support of Financial Eligibility (No Financial credentials are required for tenders having value up to Rs 50 lakh).
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. [iii] Copy of PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered).[iv} Copy of Certificate of registration of Partnership firm.
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company.
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed:: A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted:]:(a)A copy of the Partnership Deed, (b)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper,(c)A copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted:(a)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (b) A copy of Memorandum and Articles of Association of the Company.(c) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company.
IN CASE THE TENDER VALUE IS MORE THAN RS. 50 LAKHS; Tenderer/s shall submit a notarized affidavit on a non-judicial stamp paper stating that all their statements / documents submitted along with bid are true and factual.
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.16 of Part-I of IRSGCC. [in the format attached in - Documents] Annexure-3
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document if tender value is more than 50 lakh
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017 (A) for procurement order of value less than Rs. 10 crores: self- certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B)For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
Whether copies of the certificates in support of the receipt of contractual payments obtained from employer/clients and audited balance sheet duly certified by CA as prescribed in the tender for the last three years enclosed.
Please submit your bank details i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, GST and PAN Number
Partnership Deeds, Power Of Attorney Etc.: The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should upload the certified copy of partnership deed along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with tender, the tender will be treated as having been submitted by individual signing the tender documents. The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the contractor
The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partner s should submit along with the tender or at a later stage, a power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner s of the firm or any other person specifically authorising him/them to submit the tender, sign the agreement, receive money, witness measurements, sign measurement books, compromise, settle, relinquish any claim s preferred by the firm and sign No Claim Certificate and refer all or any disputes to arbitration
Uploading of Proforma for Self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per Clause - 52 of Special Conditions of Contract ) (as per Proforma-16)
Uploading of Proforma of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per Clause - 52 of Special Conditions of Contract ) (as per Proforma-17)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Signalling works in connection with "Sulebhavi (SBH): Provision of 01 additional loop (5th) line."
48UBL2025-26
48UBL2025-26
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹3.4 L
6 Apr 2026
3 Mar 2026
23 Mar 2026
134 items across 16 schedules · ₹3,87,07,375.08 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Supply of Signal aspect - LED Signal Lighting Unit Red with current regulator, as per RDSO specification No. RDSO/SPN/199/2010 revision 1.1 or latest. | Numbers | 20.00 | 9,409 | 1,88,180 | |
| 2 | Supply of Signal aspect - LED Signal Lighting Unit Yellow with current regulator, as per RDSO specification No. RDSO/SPN/199/2010 revision 1.1 or latest. | Numbers | 25.00 | 9,846 | 2,46,150 |
| 3 | Supply of Signal aspect - LED Signal Lighting Unit Green with current regulator, as per RDSO specification No. RDSO/SPN/199/2010 revision 1.1 or latest. | Numbers | 8.00 | 10,737 | 85,896 |
| 4 | Supply of Signal aspect -Route LED Signal Lighting Unit with current regulator, as per RDSO specification No. RDSO/SPN/153/2011 Rev 4.1 or latest. | Numbers | 20.00 | 7,737 | 1,54,740 |
| 5 | Supply of Signal aspect -Calling On LED Signal Lighting Unit with current regulator, as per RDSO specification No. RDSO/SPN/153/2011 Rev 4.1 or latest. | Numbers | 20.00 | 8,330 | 1,66,600 |
| 6 | Supply of Signal aspect -Shunt LED Signal Lighting Unit with current regulator, as per RDSO specification No. RDSO/SPN/153/2011 Rev 4.1 or latest. | Numbers | 30.00 | 7,236 | 2,17,080 |
| 7 | Supply of Colour light Signal Pole 140mm dia, 4.6m tall as per latest specification IRS:S 6-81 Rev.3 or latest. | Numbers | 6.00 | 7,388 | 44,328 |
| 8 | Supply of Colour light Signal Pole 140mm dia, 3.6m tall as per latest specification IRS:S 6-81 Rev.3 or latest | Numbers | 6.00 | 6,622 | 39,732 |
| 9 | Supply of CLS ladder with Platform and Shoes to suit CLS pole 4.6m, as per latest specification. | Set | 6.00 | 6,974 | 41,844 |
| 10 | Supply of CLS ladder with Platform and Shoes to suit CLS pole 3.6m, as per latest specification. | Set | 6.00 | 6,726 | 40,356 |
| 11 | Supply of Surface Base to suit CLS Signal Pole 140mm dia as per latest specification. | Numbers | 12.00 | 8,966 | 1,07,592 |
| 12 | Supply of Off-set brackets - large made of cast iron with necessary inspection as per latest specification. | Numbers | 2.00 | 4,127 | 8,254 |
| 13 | Supply of Off-set brackets - small made of cast iron with necessary inspection as per latest specification. | Numbers | 10.00 | 2,797 | 27,970 |
| 14 | Supply of FRP 2 aspect color light unit assembly as per RDSO Spec. No. RDSO/SPN/194/2006 Rev .2.0 or latest (Terminal box, mounting socket, hood, side flange and fixing bolt & nut, eye bolt, M12 bolt-3 Nos. and Fixing bolt 08 Nos) | Numbers | 6.00 | 34,696 | 2,08,176 |
| 15 | Supply of FRP 3 aspect color light unit assembly as per RDSO Spec. No. RDSO/SPN/ 194/2006 Rev.2.0 or latest (Terminal box, mounting socket, hood, side flange and fixing bolt & nut, eye bolt, M12 bolt-3 Nos. and Fixing bolt 12 Nos) | Numbers | 6.00 | 37,009 | 2,22,054 |
| 16 | Excavation of pit, casting concrete foundation as per Drg.No.SG/SWR/052 using metallic templates, for erection of colour light signals up to 4 aspects. [Foundation bolts, cement, river sand, stone jelly of size 20/25mm dia and all other miscellaneous materials required for the work shall be supplied by the Contractor]. | Numbers | 12.00 | 11,255 | 1,35,060 |
| 17 | Erection of surface base, signal pole, mounting of colour light signal up to 4 aspects complete on Signal pole/ Off-set bracket, (for LED/ filament bulbs) with lenses, triple pole lamp holder, filament switching units, CLS transformer, current regulators (whichever is applicable), fixing of ladder with platform complete and concreting of ladder shoe, fixing of number plates, marker board, lens guard, fixing of speed limit board wherever necessary,termination of tail cables, wiring of signal unit with PVC wire 3/0.75mm copper, provision of EWS locks, and painting of one coat of red oxide and two coats of aluminium/ enamel paints. When the aspect is fixed on Offset bracket using 'U' bolts and nuts, a through bolt shall be provided by drilling a hole in the signal pole to prevent the offset bracket from sliding down. ['U' bolts and nuts, through bolts and nuts, cement, stone jelly 20/25mm dia, river sand, Signal Collar-rings, wire PVC 3/0.75mm copper, lens-guard, all fixing bolts and nuts, lead wool, paints PVC/Nylon sleeves, enameled number plates. enameled marker boards, EWS locks, and all other miscellaneous materials for the work shall be supplied by the Contractor]. | Numbers | 12.00 | 12,131 | 1,45,572 |
| 18 | Supply of Calling On Signal- complete as per latest specification. | Numbers | 12.00 | 3,874 | 46,488 |
| 19 | Fixing of Offset brackets using 'U' bolts and nuts, erection of Calling On Signals/ 'A' marker lights, termination of tail cables and wiring using wire PVC 3/0.75mm copper, provision of EWS lock, number plates/ marker boards and painting. The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the Offset bracket from slipping down. (Supply of Calling On Signal/ 'A' marker light, LED aspects/holders & bulbs and Off set brackets is not covered in this item). ['U' bolts and nuts, through bolts with nut, wire PVC 3/0.75mm copper, EWS lock, Enameled number plates, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor]. | Numbers | 10.00 | 3,207 | 32,070 |
| 20 | Supply of Post type Shunt Signal - complete with hood etc., as per latest specification. | Numbers | 10.00 | 5,502 | 55,020 |
| 21 | Fixing of Offset brackets using 'U' bolts and nuts, erection of Post type shunt Signal, termination of tail cables and wiring using wire PVC 3/0.75mm copper, provision of EWS lock and painting of one coat of red oxide and two coats of aluminium/ enameled paint. The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the Off-set bracket from slipping down. (Supply of Post type Shunt Signals, LED aspects and Off set brackets is not covered in this item). ['U' bolts and nuts, through bolts with nut, wire PVC 3/0.75mm copper, EWS lock, Enameled number plates, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor]. | Numbers | 10.00 | 3,276 | 32,760 |
| 22 | Supply of Ground type shunt signal - complete with surface base, signal pole, hood etc., as per latest specification. | Numbers | 4.00 | 8,550 | 34,200 |
| 23 | Excavation of pit and casting concrete foundation as per Drg, No.SG/SWR/053 using metallic templates, for erection of Ground type colour light Shunt Signal. [Foundation bolts and nuts, cement, river sand, stone jelly of size 20/25mm and all other miscellaneous materials for the work shall be supplied by the Contractor]. | Numbers | 4.00 | 5,727 | 22,908 |
| 24 | Erection of Ground type shunt signal complete including surface base, signal pole, LED aspects/ lenses, bulbs with holders (whichever is applicable), fixing of lens guards, number plate, termination of tail cables, wiring of signal unit with PVC wire 3/0.75mm copper, provision of EWS locks and painting of one coat of red oxide and two coats of Aluminium/ enamel paint. (Supply of Ground type shunt signal complete including surface base, signal pole, LED aspects, holder, bulbs, and lenses is not covered in this item). [Wire PVC 3/0.75mm copper, lens guards, EWS locks, Enameled number plates, bolts and nuts, lead wool, paints and all other miscellaneous materials shall be supplied by the Contractor]. | Numbers | 4.00 | 4,768 | 19,072 |
| 25 | Supply of Junction type route indicator - 5 unit arm - 3 way with mounting sockets, as per latest specification. | Numbers | 2.00 | 33,677 | 67,354 |
| 26 | Fixing of Junction type Route Indicators - 3 way complete/ fixing of additional limb to the existing route indicators, termination of tail cables, wiring as per approved circuits diagram using wire PVC3/0.75mm copper, provision of required No of EWS locks, wire mesh, and painting. (Supply of junction type Route Indicators - complete and additional limb is not covered in this item). [3/0.75mm wire PVC, fixing bolts and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the Contractor]. | Numbers | 2.00 | 3,706 | 7,412 |
| 27 | Supply and fixing of Retro-reflective type Goods Warning Board as per practice & SEM (Angle/Rail is to be supplied by Railway). | Numbers | 2.00 | 9,560 | 19,120 |
| 28 | Supply and fixing of retro-reflective type Calling- On/STOP/BSLB/Legend boards as per practice & SEM (Angle/Rail is to be supplied by Railway). | Numbers | 4.00 | 7,856 | 31,424 |
| 29 | Supply of L angles 75x75x10 mm as per required lengths for Various Boards like Goods warning/Calling on/Axle counter & etc (1 PER UNIT= 1 PER TON) | Per Unit | 1.00 | 82,531 | 82,531 |
| 30 | Manufacturing, Supply, painting and fixing of markers of G/P/C/A/IB Markers/Number plates as per IRSEM DRG.No 19-D10 on MS sheet of thickness 3mm. Miscellaneous materials required for fixing is to be supplied by contractor. | Each Module | 20.00 | 584 | 11,680 |
| 31 | Dismantling and releasing of Existing Colour light Signals complete (upto 4 aspects) with or without Route Indicators, calling on signals, shunt signals etc., carefully without any damage to the gadgets, accounting and stacking them neatly at a place as instructed by Railway representative at site. The work includes breaking the concrete foundation, closing the resultant pit and resurfacing it by ramming and levelling. | Numbers | 6.00 | 3,630 | 21,780 |
| Schedule total | ₹25,63,403 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
InspectionClause_1.pdf
ATTACHMENT
JPO for cable cut
ATTACHMENT
IRGCC 2022
ATTACHMENT
TechnicalBook_1.pdf
ATTACHMENT
SpecialconditionBook_1.pdf
ATTACHMENT
InclusionofnewJPOinWTTLettertoPCOM01.05.2024withencloser-pages_compressed.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
SpecialTenderconditionbook.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .