Construction of two no of store rooms at Sub-Division Office at Sorada , Bhanjanagar in the district of Ganjam (Building Work)

CIVIL WORK Dismantling brick or stone masonary in lime or cement mortar below 10" height including stacking the useful materials for reuse and removing the debris with 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge.

Dismantling and removing RCC columns, beams, slab, staircase, landing, lintels including stacking the materials for reuse and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge.

Dismantling and removing RCC chajja, shelves, fins and parapets including stacking the materials for reuse and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the materials for reuse and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge.

GROUND FLOOR Earth work in excavation in foundation in hard or gravelly soil within 50 mtr. initial lead and 1.5 mtr. initial lift and transporting the same by mechanical means within 5.00 km. lead including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 mtr. depth including cost of all labour, labour cess and T&P for the work etc. complete and as directed by the Engineer-in-Charge.

Back filling in foundation & plinth with excavated earth including watering and ramming within 50 mtr. initial lead and 1.5 mtr. initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 mtr. depth including cost of all labour, labour cess and T&P for the work etc. complete and as directed by the Engineer-in-Charge.

Transporting of excavated earth by mechanical means within 5.00 km. lead and 1.5 mtr. initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 mtr. depth including cost of all labour, labour cess and T&P for the work etc. complete and as directed by the Engineer-in-Charge.

Supplying, diluting and preparing Chemical Emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional Anti Termite Treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313/1981(Part-II) and as per the direction of the Engineer-in-charge including cost of all materials, labour, taxes, etc. complete.

Supplying, filling in foundation and plinth with sand in 22.5 cm (9") thick layers including watering and ramming with cost, conveyance, royalties, labour and labour cess with T&P required for the work etc complete as per the direction of the Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4 cm (1.5") size clean hard crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm (6") thick to required level ramming, watering, curing etc. complete including cost and conveyance of all materials with all royalties, labour, labour cess with T&P required for the work etc. complete including dewatering if required as per direction of the Engineer-in-charge.

P.C.C. work of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect as per direction of the Engineer-in-charge.

R.C.C. work of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size downgraded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. (a) R.C.C. foundation and footing

(b) R.C.C. Plinth Beams

(c) R.C.C. Columns & Beams

(d) Roof slab

(e) Staircase

(f) R.C.C. Lintels.

Straightening bent up or coiled rods cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour, labour cess with T & P required for the work etc complete in all floors (Weight of binding wires and lapping & wastage of rod will not be considered for payment and payment will be made on weight of actual length of M.S. rods or Tor steel only.)

Fly ash brick masonry in cement mortar (1:6) after immersing bricks for six hours in water before use using fly ash bricks of 9" size having a crushing strength of not less than 75 Kg. per sq. cm including splays, cutting, circular mouldings, chamfering, corbelling and similar such type of works with all necessary projections, watering and curing etc. complete including cost and conveyance of all materials, labour and labour cess with T&P required for the work with all royalties etc. complete in all respect. (a) Foundation & Plinth

(b) Super Structure

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including close deep chipping and slurry treatment including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge.

12 mm (1/2") thick cement plaster (1:4) finished smooth to brick works with neat cement punning for skirting and dados after raking out the joints including watering and curing with cost and conveyance, royalties of all materials, labour & labourcess with T&P required for the works etc. complete in all respect as per direction of Engineer-in-charge.

12 mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge.

16 mm thick cement plaster of proportion (1:6) finished smooth to inside brick work after racking out joints including watering and curing, cost, conveyance, royalities of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge.

Supplying of M.S. Window grill / M.S. Fixed Grill / M.S. grill gate made out of M.S. angle, M.S. flat & M.S. square etc including cutting, welding, all labour, labour cess and T&P etc complete as per direction of Engineer-in-charge.

Supplying of M.S. pannelled window double leaved with M.S. Frame ( 35 x 35 x 6 mm M.S Angle), shutter style -Top & bottom rail with 25 x 25 x 3 mm M.S. Angle, window pannel with 1.00 mm C.R. sheet, Pannel stiffner covering width of each leaf 19 x 5 mm M.S. Flat 2 nos of each leaf, Hinges 4 nos of size 100 mm. ( 2 nos on each side) bought out as per ISS, Hold Fast 2 nos. on each side with 35 x 35 x 6 mm angle 100 mm. length bifurcated at tip, with 2 nos fabricated handle (19x5 mm M.S. Flat), 4 nos tower bolt bought out as per ISS and Horizontal grills of 12 mm M.S. Round at 100 mm. spacing as per approved design and direction of Engineer-in-charge including cost and conveyance of all materials with all labour, labour cess and T&P required for the work etc. complete

Labour for fitting & fixing of M.S. window grills including cost of screws, labour, labour cess etc. complete as per direction of the Engineer-In-Charge

Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.

Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, labour, labour cess, T&P etc. complete as per direction of Engineer-in-Charge.

Distempering two coats to wall surface with any approved Distemper paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge.

Wall Painting two coats with any approved weather coat paint of approved shade over a coat water bound cement primer to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge.

INR Eleven Thousands One and Paise Three Only

INR Eight Thousand Five Hundred Forty Four and Paise Thirty Three Only

INR Three Thousand Six Hundred Twenty Six and Paise Twenty Nine Only

INR Six Thousand Six Hundred Thirteen and Paise Twenty Three Only

INR Seventy Thousands Four Hundred Ten and Paise Ninety Eight Only

INR Fourteen Thousands Seven Hundred Thirty One and Paise Ten Six Only

INR Fifty Six Thousands Five Hundred Twenty Six and Paise Ten Only

INR Eight Thousand Two Hundred Seventy One and Paise Four Only

INR Eight Hundred Sixty Four and Paise Sixty Six Only

INR Twenty Four Thousands Six Hundred Fifty Three and Paise Ten Six Only

INR One Lakh Eighty Seven Thousands Six Hundred Forty Six and Paise Sixty Only

INR Three Lakh Thirteen Thousands One Hundred Eleven and Paise Eighty Seven Only

INR Fifty Five Thousands Nine Hundred Twenty Eight and Paise Eighty Six Only

Straightening bent up or coiled rods cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour, labour cess with T & P required for the work etc complete in all floors (Weight of binding wires and lapping & wastage of rod will not be considered for payment and payment will be made on weight of actual length of M.S. rods or Tor steel only.)

INR Three Lakh Ninety One Thousands Seven Hundred Sixty One and Paise Fifty Six Only

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including close deep chipping and slurry treatment including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge.

12 mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge.

16 mm thick cement plaster of proportion (1:6) finished smooth to inside brick work after racking out joints including watering and curing, cost, conveyance, royalities of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge.

Supplying of M.S. Window grill / M.S. Fixed Grill / M.S. grill gate made out of M.S. angle, M.S. flat & M.S. square etc including cutting, welding, all labour, labour cess and T&P etc complete as per direction of Engineer-in-charge.

Supplying of M.S. pannelled window double leaved with M.S. Frame ( 35 x 35 x 6 mm M.S Angle), shutter style -Top & bottom rail with 25 x 25 x 3 mm M.S. Angle, window pannel with 1.00 mm C.R. sheet, Pannel stiffner covering width of each leaf 19 x 5 mm M.S. Flat 2 nos of each leaf, Hinges 4 nos of size 100 mm. ( 2 nos on each side) bought out as per ISS, Hold Fast 2 nos. on each side with 35 x 35 x 6 mm angle 100 mm. length bifurcated at tip, with 2 nos fabricated handle (19x5 mm M.S. Flat), 4 nos tower bolt bought out as per ISS and Horizontal grills of 12 mm M.S. Round at 100 mm. spacing as per approved design and direction of Engineer-in-charge including cost and conveyance of all materials with all labour, labour cess and T&P required for the work etc. complete

Labour for fitting & fixing of M.S. window grills including cost of screws, labour, labour cess etc. complete as per direction of the Engineer-In-Charge

Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.

Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, labour, labour cess, T&P etc. complete as per direction of Engineer-in-Charge.

Distempering two coats to wall surface with any approved Distemper paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge.

Wall Painting two coats with any approved weather coat paint of approved shade over a coat water bound cement primer to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge.

INR Eleven Thousands One and Paise Three Only

INR Six Thousand Six Hundred Thirteen and Paise Twenty Three Only

INR Seventy Thousands Four Hundred Ten and Paise Ninety Eight Only

INR Fourteen Thousands Nine Hundred Eighty Six and Paise Eighty Four Only

INR Fifty Six Thousands Five Hundred Twenty Six and Paise Ten Only

INR Eight Thousand Two Hundred Seventy One and Paise Four Only

INR Eight Hundred Sixty Four and Paise Sixty Six Only

INR Forty Five Thousands Ninety Five and Paise Twenty Two Only

INR One Lakh Eighty Seven Thousands Six Hundred Forty Six and Paise Sixty Only

Straightening bent up or coiled rods cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour, labour cess with T & P required for the work etc complete in all floors (Weight of binding wires and lapping & wastage of rod will not be considered for payment and payment will be made on weight of actual length of M.S. rods or Tor steel only.)

INR Three Lakh Ninety One Thousands Seven Hundred Sixty One and Paise Fifty Six Only

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including close deep chipping and slurry treatment including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge.

12 mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge.

16 mm thick cement plaster of proportion (1:6) finished smooth to inside brick work after racking out joints including watering and curing, cost, conveyance, royalities of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge.

Supplying of M.S. pannelled window double leaved with M.S. Frame ( 35 x 35 x 6 mm M.S Angle), shutter style -Top & bottom rail with 25 x 25 x 3 mm M.S. Angle, window pannel with 1.00 mm C.R. sheet, Pannel stiffner covering width of each leaf 19 x 5 mm M.S. Flat 2 nos of each leaf, Hinges 4 nos of size 100 mm. ( 2 nos on each side) bought out as per ISS, Hold Fast 2 nos. on each side with 35 x 35 x 6 mm angle 100 mm. length bifurcated at tip, with 2 nos fabricated handle (19x5 mm M.S. Flat), 4 nos tower bolt bought out as per ISS and Horizontal grills of 12 mm M.S. Round at 100 mm. spacing as per approved design and direction of Engineer-in-charge including cost and conveyance of all materials with all labour, labour cess and T&P required for the work etc. complete

Labour for fitting & fixing of M.S. window grills including cost of screws, labour, labour cess etc. complete as per direction of the Engineer-In-Charge

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials, labour, labour cess, T&P etc. complete as per direction of Engineer-in-Charge.

Distempering two coats to wall surface with any approved Distemper paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge.

Wall Painting two coats with any approved weather coat paint of approved shade over a coat water bound cement primer to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge.

INR Eleven Thousands One and Paise Three Only

INR Forty Five Thousands Ninety Five and Paise Twenty Two Only

Point

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (flame retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((flame retradant type)) with suitable size modular box & cover(flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (flame retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)

S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

(Light fitting Fixture & Fan) Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regula

Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years

SITC of energy

INR Fourteen Thousands Five Hundred Sixty Only

INR Forty Four Thousands Five Hundred Two Only

INR Two Thousand Forty Only

INR Five Thousand Two Hundred Thirty Six Only

INR Three Thousand Nine Hundred Thirty Four Only

INR Two Thousand Eight Hundred Eighty Only

INR Five Hundred Fifty Eight Only

INR Two Thousand Seventy Nine Only

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. Tapping from 50mm x 6 mm bus bar to all sub panel

INR Fifteen Thousands Only

INR Fifteen Thousands Four Hundred Only

INR Ten Thousands Nine Hundred Only

INR One Thousand Six Hundred Fifty Three and Paise Sixty Only

INR Four Thousand Six Hundred Five Only

INR Twelve Thousands One Hundred Sixty Two Only

INR One Hundred Twenty Four and Paise Twenty Only

INR One Thousand Two Hundred Sixty Three Only

INR Three Thousand Nine Hundred Fifty Five Only

INR Five Hundred Twenty Three and Paise Ninety Only

INR Seven Hundred Seventy and Paise Ninety Only

INR Two Thousand Nine Hundred Sixty One and Paise Eighty Only

INR Four Hundred Seventy Two Only

INR Two Thousand Eight Hundred Seventy Four Only

INR Two Thousand Two Hundred and Paise Forty Only

INR Five Hundred Fifty and Paise Ten Only

INR Seven Hundred Fifty and Paise Ninety Only

INR Two Thousand Seventy Two and Paise Forty Only

INR Four Hundred Twenty Nine and Paise Twenty Only

INR One Thousand Eight Hundred Twenty One Only

INR Four Thousand Three Hundred Eighty and Paise Twenty Only

INR Two Lakh Sixty Two Thousands Five Hundred Thirty Two Only

INR Seventy Nine Thousands One Hundred One and Paise Twenty Only

INR Twenty Two Thousands Three Hundred Thirty Three and Paise Fifty Only

INR Three Hundred Eighty Six Only

INR Three Hundred Twenty Two and Paise Seventy Only

INR One Thousand Seven Hundred Sixty One and Paise Sixty Only

INR Four Hundred Seven and Paise Forty Only

INR Four Hundred Ninety Seven and Paise Thirty Only

INR One Thousand Three Hundred Ninety Two Only

INR Fifty Eight and Paise Twenty Only

INR Three Hundred Eighty Five and Paise Twenty Only

INR One Thousand Four Hundred Thirty Three and Paise Forty Only

INR Fifty Five Thousands Eight Hundred Ninety Nine and Paise Sixty Only

INR Sixteen Thousands Four Hundred Eighty Nine and Paise Sixty Only

INR Three Thousand Sixty Six and Paise Forty Only

INR One Thousand Four Hundred Thirty Five and Paise Seventy Seven Only

INR Two Thousand Two Hundred Twenty Seven and Paise Eighty Nine Only

INR Three Thousand Four Hundred Sixty Five Only

INR Two Hundred Fifty Three and Paise Twenty Eight Only

INR Three Thousand Nine and Paise Twenty Seven Only

INR Thirteen Thousands Five Hundred Forty Six and Paise Twenty Nine Only

INR Nine Thousand One Hundred One and Paise Fo

Sinking of 200mm x 150mm size Tube well through D.T.H or Combination drilling rigs in hard rock areas with GI/PVC casing pipes Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Labour for drilling of 200 mm dia bore 00 mtr to 125 mtrs

150mm dia

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.

Supplying all materials, labour, tools and plant and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental store in good condition.

Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1.00H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton/CRRI make

DOL Control panel

32mm dia steel short piece

Well cap

50mm size CI bracket

2.50 sqmm flat cable

Steel rope with cover

20mm dia rigid UPVC pipes

Labour charges for lowering including transportation

32mm dia HDPE pipe