Construction of 2.90 KM Long 33 KV Line Dangauli Mau From 132 Kv S/s Ghosi (Barjala) Mau

Amount

SUPPLY OF MATERIALS (33 KV Line)

Guarding for 6&8SWG GI wire as pr Annex7 - 1400002066

33 KV GUARDING ANGLE - 1700000415

33KV MS TOP CHANNEL - 2700000135

DANGER BOARD WITH CLAMP FOR 33 KV LINE - 1700000114

CROSS ARM HOLDING CLAMP ST POLE WITH NUT BOLT & WASHER - 2500000068

33KV TOP CHANNEL CLAMP FOR PCC 9M WITH NUT BOLT & WASHER - 2500000194

PACKING PIECE OF 11 MTR S.T. POLE WITH NUT BOLT & WASHER - 2700000203

33KV TOP CHANNEL CLAMP FOR STP 11M WITH NUT BOLT & WASHER - 2500000193

NUT & BOLT (5 SUT, 4" LONG) WITH WASHER - 2100000021

CABLE BOX O/D 33 KV 3X300 XLPE - 2300000045

G.I. PIPE BORE EARTHING 60 FEET DEEP - 1400000213

33KV BRACING ANGLE -2700000133

33 KV E-CLAMP WITH NUT BOLT & WASHER - 2500000049

GUARDING CLAMP FOR ST POLE WITH NUT BOLT & WASHER - 2500000055

33 KV X-ARM CLAMP FOR PCC 9 MTR WITH NUT BOLT & WASHER -2500000136

P.G. CLAMP FOR PANTHER TO DOG CONDUCTOR -2500000031

BRACING ANGLE CLAMP (FOR TOP/bottom) WITH NUT BOLT & WASHER - 2400000128

33 KV F Clamp for 11 Mtr Long STP Pole WITH NUT BOLT & WASHER -2500000245

F- CLAMP FOR PCC POLE 33KV WITH NUT BOLT & WASHER -2500000079

CABLE BOX ST.TH.33 KV 3X300 XLPE - 2300000050

Erection Work

Loading ,Carriage& unloading of PCC POLE 9.0 MTR LONG from store centre Mau to work site with proper stacking

Loading ,Carriage& unloading of STP Pole 11 Mtr. from store centre Mau to work site with proper stacking

Loading ,Carriage& unloading ofCABLE H.T.XLPE 33 KV 3X300 SQ.M.M. from store centre Mau to work site with proper stacking

Loading ,Carriage& unloading ofA.C.S.R. DOG CONDUCTOR from store centre Mau to work site with proper stacking

Loading ,Carriage& unloading of STEEL TUBLER POLE SP-70 13.00 MTR from store centre Mau to work site with proper stacking

Loading ,Carriage& unloading of Petty Stock materials ( X-arm, earthing rod, PIN INSULATER, DISC INSULATER WITH FITTING, STAY COMPLETE, GI WIRE etc.) from store centre Mau to work site with proper stacking

Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Normas).

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator complete as per RESSPO Normas).

Erection of Single pole structure on 13 mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator complete as per RESSPO Normas).

Extension of 9 mtr PCC Pole for proper clearence for existing lines by 33 KV Top channel with clamp after providing with complete work as per proper specification.

Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete as per RESSPO Normas) .

Erection of Double pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (Top channel 125 x 65 x 3200 mm with clamps complete as per RESSPO Normas) .

Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ( top channel 125 x 65 x 3200 mm with clamps complete as per RESSPO Normas)

Erection of Four pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ( top channel 125 x 65 x 3200 mm with clamps, complete as per RESSPO Normas) .

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per RESSPO Normas

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per RESSPO Normas

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks./HDD method as per size required as per RESSPO Normas

Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3.5 m long Complete work.(All materials/Clamp providing by contracter)

Erection of 33 KV Cable Stand with clamping for 33 KV XLPE Cable at 132 Kv S/S Ghosi(Barjala) 33 kv bay after providing 2 NO 33KV Top channel with fabrication work complete as per site required.

Special GI Pipe Earthing Complete with materials for 33 KV ‘XLPE’ C/J Kit (All materials providing by contracter)

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² STRAIGHT THROUGH

Earting of poles as per RESSPO Normas

Concriting of poles as per RESSPO Normas

Making plinth for Poles as per RESSPO Normas

Fixing of danger boards on poles as per RESSPO Normas

Fixing of Barbed wire on poles as per RESSPO Normas

Painting Of ST Poles as per RESSPO Normas

Fitting Of 33 KV MS Bracing angle on Double pole , TRI-Pole & four Pole

M/s. Yuwa Shakti Construction