Repairs and Renovation of Arulmigu Kirubasamuthira perumal Temple at Sirupuliyur

Amount

Scraping the decayed lime plaster from the surface of Vimanams / Gopurams carefully including isolated bricks of brick work with out damaging the varivargam racking out the joints, cleaning the surface with water, including all working in heights,hire charges for special tools, brushes etc, complete.

Kalkaram

For Vimanams/Gopurams up to 15' ft height

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor1:1.5 (One Lime and One and half Sand) complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with L.M. 1:1.5 (One Lime and One and half Sand) and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams.

For Kalkaram

For Vimanams/Gopurams up to 15' ft height

Painting with multicolour (Panchavarnam) good exterior emulsion paint complete for the Vinamans/Gopurams, inculding cost and conveyence of all materials, lobour charges inculding Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings

Thorough scraping the old plastered surface including all incidental charges etc; complete.

Clean removal of lime mortar from walls,complete complying with standard specification

Plastering with Lime mortar 1:1.5 (One part Lime and one and half sand ), 20 mm thick including cost and conveyance of all materials and labour charges curing etc, complete complying with standard specification and as directed by the departmental officers. Outer Dooms

Plastering withLime mortar 1:1.5 (One part Lime and one and half sand ), 12 mm thick including cost and conveyance of all materials and labour charges curing etc,complete complying with standard specifications and as directed by the departmental officers. Inner Dooms and other inners

Clean removal of lime plaster from walls and racking out joints 20mm deep or from terraced roofs racking out joints 12mm deep.complete complying with standard specifications.

pointing with Lime mortar 1:1.5, 20mm deep neatly including cost of special tools such brushs watering, curing etc complete complying with standard specification

Painting two coats of newly plastered wall surface with water based interior emulsion paint of approved first quality and of approved colour over a priming coat in cluding thorough scrapping, clean removal of dirt,including necessary plaster of paris putty, wherever required etc, complete as per specification

Clean removal of old paint from the surface of wooden door.complete complying with standard specification and as directed by the departmental officers.

Painting old wood work with two coats of enamel paint of approved quality and color over one coat of white primer in all floors the rates is to include cost of all materials, brushes scaffolding charges etc, complete complying with standard specifications.

Clean removal of old paint from the surface of Ironwork ,complete complying with standard specifications.

painting old iron work such as gate, steel door,windows,ventilators with two coats of approved quality and colour of Synthetic enamel paint over the existing red oxide primer in all floor etc complete complying with standard specifications.

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for working, inspection etc, complete hire charges only for erection, maintenance and removing the same on completion of the work1 sq,ft.

Vimanam upto 15'0" Ht excluding Kalkaram)

Vimanam upto 25'0" Ht excluding Kalkaram)

Providing water jet washing in the granite portion by using appropriate equipements with all its accessories etc.from the granite surface and making it into original surface including cost and conveyance of hire charges for all tools and plants and final clearing etc complete.

Dismantling clearing away and carefully stacking materials useful for reuse one course of terrace bricks floor finish in cement mortar (brick on edge flooring).

Brick on edge flooring over a bed of concrete 100 mm thick and pointed with Lime mortar 1:1.5 including cost of all materials and labour charges for laying etc complete.

Supply and installation of Lightning Arrester system unit on roof of the building / Tower / Gopuram / Vimanam by assembling the ESE Air Terminal - unit of L-model(LPI Australlia Make)having 86mtrs radius protection with special mounting structure of 4.5 mts height GI/Alu. Pipe and 300x300x8mm MS plate, 3mts-48mm OD Class 'C' GI outer pipe, 1.8m-38mm OD inner pipe on roof mounting with concrete base with the support of fasteners and with FRP adapter complete. The said ESE Air terminal (ESEAT) is the main unit of L.A. and it should satisfy and conformto IS standard norms / specifications / CPRI / ITE Testing conditions etc. for the good functioning of the system which should be, as described below. The ESEAT (Early Streamer Emission Air Terminal) has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 meters capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field. The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (∆TS) obtained during the lab test for the offered model is 60 us. The ESEAT works on negative as well as positively polarizes discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). (Page No.37, Point No. 3 of Clause 8.6 of theRevised NFC 17-102 version 2011. L-Radius of protection: 86M Level of protection considered for the Project-II level. (LPI Australia Make / FAURSE-UK make)

Supply and clamping of 1x70 sq.mm S.C. Flexible multistrand PVC unarmoured copper cable in suitable HDPE pipe on post / wall/ ceiling / Gopuram, etc. With M.S. Clamps complete.

Supply and clamping of 1x70 sq.mm S.C. Flexible multistrand PVC unarmoured copper cable in suitable PVC rigid pipe on post / wall / ceiling / Gopuram, etc. With M.S Clamps complete.

Supply and laying of 1x70 sq.mm S.C. Flexible multistrand PVC unarmoured copper cable in a trench to be excavated at a depth of 0.75mtr putting 0.15 mtr. Layer of sand and covering the cable completely with bricks and sand refilling the earth to make good.

Supply and fixing Test link Box for each down conductor inorder to disconnect the earth termination system to enable measurement of Resistance on suitable angle iron frame work with cable entry boxes on wall with earth connection complete

Supply and installation of maintenance free G.I. Earthing system comprising of 50mm dia and 2 mtr long earth electrode of low carbon steel rod with 100-micron bonding and 25 kgs of carbon-based environment friendly Backfill Compound and suitable clamp complete

Supply and installation of steel fiber Reinforcement concrete precast readymade earth pit chamber of size 450x450x200mm base with cover materials conform to standard IS 12592 complete.

Providing Scaffolding arrangement for Gopurams upto 75 feet height with casurina posts, coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.

Supply and providing cable end termination for 1x70sq.mm PVC flexible copper unarmoured cable with suitable copper cable sockets by crimping with Electrical connection complete

Supply and fixing of Lightning Strike Recorder of good brand like LPI or equivalent make conforming to IS standard on wall with suitable angel iron frame work with cable entry boxes which is designed for easy mounting on the down conductor to effectively count the number of lightning strikes captured by the Air Terminal. This recorder works at minimum sensitive range of 1500A to a maximum sensitive range of 1500A to maximum of 22KA @ 8/20 micro seconds with protection class of IP67(IEC529). It is CPRI tested one and is self-powered and not the usage of battery or any other external power source etc. complete.

Supply, erection, Commissioning & Testing of 15 KVA DG set

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 16 / 4 x 10 sqmm PVC armoured LTUG cable with earth connection.

Supply, erection, commissioning and testing of 15 KVA Diesel generator with acoustic arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with 21.6 BHP for 15 KVA generator at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with air cleaner, base frame, crank case, lubricating oil, fan and fan drive, fuel and oil filters, flexible fittings, exhaust governor, hydro-mechanical gauges for fuel pressure and oil pressure, tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system for LLOP including the set of tools, spares as supplied by the manufacturer along with the Engine. The alternator should have brushless self-excited Y connected, self-regulated of continuous rating, developing an output of 24KW at 0.8 power factor lagging, 415 V, 3 phase, 50 Hz at 1500 rpm with a voltage regulation of ±1 % under steady state condition with over speed capacity of 10% for 5 minutes withstanding capacity with class H insulation, ingression protection of IP23 with topicalization. The alternator is to be designed, built & tested to IS, BS, IEC or any other equivalent Indian or International Standards.\

The engine should be provided with suitable electrical starting system including, suitable radiator arrangements with suitable fully charged new batteries and with other connecting accessories. microprocessor based genset controllers display and displayed at phase voltage & currents, Frequency, reverse Power, Genset KVA, KW, KWh, KVAr, power factor, canopy temperature, lube oil pressure, engine temperature, RPM, run hours, number of starts, fuel level, auto / manual stop, battery charge condition. The fuel tank should be fabricated with 14 SWG CRCA MS sheet steel inbuilt removable type sheet metal fuel tank with fuel gauge drain plug and fuel connections, fuel level indicator and with a capacity of not less than 75 Ltrs. Provisions are to be made to filter the sediments, water in the fuel at rear side and provision of vent at top to release the air pressure in the tank. The tank should be painted with noncorrosive and non-flammable paint. The fuel tank should be filled with a minimum level of fuel for test running on full load. The entire Genset shall be placed on concrete bed.

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming, 1 no. 63A TP MCB and 1 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

500 Litres

Add GST 18%

THANGARAJU GANAPATHY