SPECIAL REPAIRS TO BUILDING NO. 4 (GS OFFICE) AT 14 GTC SUBATHU UNDER GE KASAULI

Amount

Demolition of cement concrete (un re-inforced) in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified .

Dismantling timber scantling unframed work 40 sq cm and over in section in any position, unframed work complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified .

Dismantling boarding any thickness, any description, fixed in any position complete all as specified.

Hacking out old broken glass n exc 0.5 Sqm in each pane (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified .

Taking down cement plaster on brick wall surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital pattern as in roof covering complete all as specified.

15mm thick rendering in cement mortar 1:6 on fair faces of brick masonry surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching of roof ,seismic and other similar bands, shelves, coping, bed plates, hold fasts, plinth courses, filling in pressed steel frame and the like finished fair and even including necessary form work complete all as specified.

50mm thick plain cement concrete 1:3:6 type C-1, (using 20mm graded stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as specified. Note:- The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channel / drains complete all as specified .

Extra for forming fair finished drain or channel 30 cm inner girth in forms, moulds/stopped ends etc. complete all as specified .

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufacturer's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufacturer's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified.

Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in C.M 1:6 complete all as specified.

Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in C.M 1:4 complete all as specified.

Sheet glass , ordinary quality & glazing 3mm thick, with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified.

Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified.

20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, rollers etc fixed in repair complete all as specified.

Preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. including washing, rubbing down and stopping the connected previously treated surfaces and applying two coats of oil emulsion distemper (tint as approved by GE) complete all as specified.

Preparation of plastered or unplastered new surfaces of walls and applying two coats of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified.

Preparation of old surfaces of wood or wood based surfaces of any description not other wise described over 10 cm width or girth and applying wooden putty into gaps and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Preparation of plastered or unplastered old decorated surfaces with sand papering of walls including cornices etc. including washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of exterior acrylic emulsion (tint as approved by GE) complete all as specified.

Pre-laminated particle board 19mm thick, exterior grade pre laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber / steel frame work as in shelves or shutters or wall panelling, fixed as in repairs complete all as specified.

Piano hings, mild steel bright finish width of flap 40mm fixed in repair complete all as specified.

Magnetic catches brass body for use in cup boards fixed in repairs complete all as specified.

40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed as in repairs complete all as specified.

Precast cement concrete tiles of size 360X270mm or crossword size 304X304mm and thickness of tiles 22mm+/-2mm, polish finish, M-50 grade, compressive strength 688 Kg/Sqcm, as per IS-1237-1980 coloured i.e tera cota, Misty beige, smoke grey and design piazza laid over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified.

Walling of random rubble stone masonry,face stone hammer dressed, brought upto courses, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified.

Raking out joints/ pointing in cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified.

2nd class HW clean sawn timber scantling/posts complete all as specified.

25mm thick boarding / planks of 2nd class hard wood planed both sides fixed with nails in any situation complete all as specified.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treating with creosote complete all as specified.

Preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified .

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Solid PVC false ceiling PVC sheet suitably placed in false ceiling grid made of G.I frame work (snap grid) for false ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified.

False ceiling with one layer of 'LaGyp' standard boards manufactured by M/S Lafarge Board Gypsum India Pvt Ltd, at all height and levels. Standard boards of size 1220x1830x12.5mm, standard board to be laid on 'LaGyp' universal channel (web 45 mm per manunfacturer's specifications metal comprising of "LaGyp" universal channel (web 45 mm and flange 27mm base metal thickness (BMT) 0.55 mm and length 3660 mm to be used as main channel as well as ceiling channel. "LaGyp" connecting clips, perimeter channel ( Size of web 28 mm, flange 18/30 mm and length 3660 mm, BMT 0.55 mm) and "L" angle (Length 3050 mm BMT 0.55 mm) with finally the board are to be binded and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the board with "LaGyp" easy joint Gypsum based jointing compound, "LaGyp" paper tape including applying two coats of oil emulsion distemper to give a neat and even finish including preparing the base with primer and use of scaffolding etc complete all as specified.

Grouting work in cement concrete and sealing of stone wall surfaces cracks by pumping or by suitable mechanical means with a suitable crack sealant compound complete all as specified and as directed.

Taking down carefully copper/aIuminium point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roses, pendent, regulators, sockets etc to be measured & paid separately) & making good to disturbed surface of walls/floors etc. complete all as specified .

Point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and including casing-n-caping medium grade with all connecting accessories including mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer including mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, including PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly for the following complete all as specified:-

One light point controlled by one switch

One bell point controlled by one switch

One switch socket outlet 3 pin,5 Amp on the independent board

One switch socket outlet 3 pin,5 Amp on same board

One light point controlled by 2 two way switches

Point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 2.5 Sqmm (Nominal area), PVC insulated cable in and including casing-n-caping medium grade with all connecting accessories including mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer including mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, including PVC insulated FRLS copper conductor 2.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

Lamp holder,PVC insulated body, with back plate suitable for batten fitting complete all as specified

Switch piano, flush type, single pole 1 way 6 Amp,IS marked complete all as specified.

Switch piano flush type, single pole 1 way 16 Amp complete all as specified.

Socket 5 pin 6 Amp piano flush type,IS marked complete all as specified.

Socket out let 2 in one 6 pin 6 & 16 Amp complete all as specified.

Bell,AC 240 volts,single pole,ding dong type complete all as specified.

Bell push, 6 Amps, SP, flush type complete all as specified.

Ceiling rose, 3 phase/ PVC/ polycarbonate,isolated body complete all as specified.

Switch piano, flush type, single pole 2 way 6 Amp,IS marked complete all as specified.

LED bulb 10 watt complete all as specified.

Decorative box type fitting pre-wired for and including LED tube 18/20 watt 6000K 4 ft IP20 linear LED T8 tubular lamp with extruded aluminium/PC body and PC diffuser with inbuilt driver complete all as specified. Make of fitting : Crompton Greaves cat No. DMLN1LT8-16 or its equivalent in the makes mentioned in Appendix "B'. Make of LED tube : Crompton Greaves Cat no. LT8-20-865-2 or its equivalent in the makes mentioned in Appendix 'B'. Note : Fitting, LED tube and driver shall be of same make.

Wall Mounting LED fitting 9/10 watt 6000K 2 ft basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete all as specified. Make: Bajaj product code 112407 BCLSB 10 WH or its equivalent in the makes mentioned in Appendix 'B'.

Bulkhead luminaire decorative energy saving new generation 10W LED IP65 with opal diffuser with electronic driver & connection with copper flexible cable 3 core complete all as specified. Make Crompton greaves cat No. LHBE-10-CDL or its equivalent in the makes mentioned in Appendix 'B'.

LED building security light 30 watt pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronic driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light complete all as specified. Make: crompton greaves cat No. LSTS-30-CDL or its equivalent in the makes mentioned in Appendix 'B'.

Bracket made out of GI light grade pipe of 32 mm bore 1.5 mtr long bent to an angle of 120 degree with fixing arrangements on wall fixed as in repair complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, TPN 4 way, 415 Volt complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 4 way, 240 Volt complete all as specified.

MCB, 'C' curve SPN, 240 V, 25-32 Amp 240 volt breaking capacity 10 kA complete all as specified.

MCB, 'C' curve TPN, 415 V, 40 Amp breaking capacity 10 kA complete all as specified.

MCB, 'C' curve TPN, 415 V, 63 Amp breaking capacity 10 kA complete all as specified.

MCB 'C' curve single pole 6 to 32 Amp, 240 volt breaking capacity 10 kA complete all as specified.

Submain wiring with 4 single core PVC insulated FRLS cable 10 Sqmm copper conductor PVC sheathed in and including rigid PVC casing -n-caping, drawn with 2 single core PVC insulated FRLS cable 10 Sqmm copper conductor PVC sheathed for earth wire fixed with saddle and connecting to common earth terminals complete all as specified. Note: 6 runs of 10 sqmm cable and one run of casing and capping shall be measured as one unit.

Submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC casing -n-caping, drawn with 6 Sqmm PVC insulated copper conductor cable for earth wire fixed with saddle and connecting to common earth teriminals complete all as specified. Note: 2 runs of 6 sqmm cable and one run of casing and capping shall be measured as one unit.

Blanking plate complete all as specified.

Earthing with galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixture of charcoal and salt in alternate layers , buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top edge of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia,(No 8 SWG) by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No. 3 of SSR - 2009 (Part -I) & including necessary excavation and earth work in any type of soil. PCC chamber, RCC earth pit cover, complete all as specified.

Exhaust fan, energy efficent metallic blades heavy duty turbo force of size 300 mm sweep, 900 rpm, AC, 230 volts complete with louvers, shutters, mounting on wall with holding down bolts, nuts, washers including cutting holes into or through stone/brick walls for fixing of 300 mm sweep exhaust fan and making good the disturbed surface to match with the existing surface and connection with f flexible copper conductor cable three core from ceiling rose to fan and testing complete all as specified.

M/S H S ENTERPRISES

M/s Parmod Kumar

S.R.AND CO.

M/S SHANTI SARUP DINESH CHAND