I.B at Kanisi_building

Removing old lime or cement plaster from walls including racking out joints 12mm deep (1/2) and removing the debries & stacking the materials within 50m away from work site including cost of all labour with T & P, Cess required for the work as per direction of EIC.

16mm (5/8) thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floor as per direction of Engineer-in-charge.

Supplying,fitting,fixing up window (sliding type) made up aluminum section 151-154,151-155, as windows frame sec tion no. 151-155,151-153 abd 151-167 as shuter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting in cluding cost of materials alllabour,T&P & Cess etc complete as per direction of Engineer-in-charge.

Providing fitting and fixing up partition walling OEL aluminum anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical memer and OEL section 4660 as Tapered clip for fixing up 12mm thick prelaminated board (Nova pan Make) and jointing angle No. 1855 including cost or materials all labour with T&P & Cess required for the work etc as per direction of EIC.

Supplying & Providing of M.S. Pannelled door double leaved with MS frame over all size including frame made out of following materials conforming to relevant ISS frame: 30 x 30 x 5mm M.S.Angle door panel 1.0mm C.R.sheet panel stiffener covering width of leaf 19 x 5 mm flat 3 nos Hingessize 100 mm 3 nos bought out as per ISS hold fast 30x30x5mmMS angle 150mm length bifurcated at the tip 3 nos on one side handle 19x5mm M.S.Flat ,fabricated 2 Nos aldrop 2 nos bought out as per ISS Tower Bolt 2 nos bought out as per ISS including cost conveyance &of all materiasl& labour with T&P & Cess in all respectas per direction of Engineer In Charge.

Supplying & providing, of M.S. window grill made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance &of all materials & labour with T&P & Cess in all respects as directed by the Engineer-in-Charge.

Labour for fitting,fixing ofM.S.Door/ Window shutters as per approved design including cost of screws with cost of all labour, T&P and Cess required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges.

Painting two coats with any approved paint over a coat of priming to iron work including cost of the primer and paints including and papering, polishing the surface in all respect with cost, conveyance andof all materials and labour, Cess with T&P required for the work etc. complete in all respect.Ground Floor

First Floor

Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance Royalty, DMF, EMF & Additional Charges andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. Ground Floor