8896/2022-23/E8

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m for laying cables, stays etc and getting out in hard dense soil all as specified.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified

Material and labour for dry sand in trenches cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed.Note- Punned down thickness will be measured for payment purpose.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

M&L and jointing testing and commisioning in replacement XLPE LT UG Cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall etc Make of LT UG Cable- Havells / KEI/ Polycab/Grandlay or equivalent and including taking down old unserviceable cables complete all as specified and directed of following sizes :-

Cross sectional area 3.5 core 95 Sqmm

Cross sectional area 3.5 core 50 Sqmm

Cross sectional area 4 core 10 Sqmm

Supply & lay GI tubing light grade 40 mm dia bore in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed.

Cutting of road / hard standing upto a size not exceeding 20 cms in width and not exceeding 60 cms in depth for laying of LT UG cable protection pipe line making good the disturbed portion so as to match existing finishing or with PCC 1:2:4 type B1 complete all as specified and directed.

Supply & fixing of Automatic Street Light Control Switch using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required Illuminance Level for Switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs.Three-Phase load of 8kW (Swadeep-02EC8kW3P) with 3 nos. Contactors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 20-32 Amps each & Circuit wiring (Copper) of min.10 sq.mm The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Rust Proof, Electric Shock Proof, Termite proof and FR grade SMC Enclosure conforming to IP54. The circuit should also have provision for Manual Operation (i.e. Sensor By-Pass option). complete all as specified and directed. Make:- CG, Phillips or equivalent.

S & F in replacement MCCB, four pole, 415 Volts, 63 Amp, ultimate breaking capacity 25 KA, 75% lcs, 50 Hz, confirming to IEC: 60947- II /IS - 13947-II with adjustable thermal and fixed magnetic setting complete all as specified and directed. Make- C&S/Havells/L&T or Equivalent

S & F in replacement MCCB, Three pole, 415 Volts, 40 Amp, ultimate breaking capacity 25 KA, 75% lcs, 50 Hz, confirming to IEC: 60947- II /IS - 13947-II with adjustable thermal and fixed magnetic setting complete all as specified and directed. Make- C&S/Havells/L&T or Equivalent

Outdoor type factory made bus bar chamber of size 0.75 x 0.45 x 0.40 metres depth made out of CRCA sheet 3.15mm thick with 4 No's aluminium bus bars of capacity 200 Amps,with colour code supported on insulators, internally prewired having locking arrangement, handle, provision of suitable hole at bottom for incoming and outgoing under ground cables, panel having angle iron frame made of 40 X 40 X 6 mm angle iron and 50 cms long legs made of 40 X 40 X 6 mm angle embedded upto 20 cms in PCC & 30 cms clear above ground complete including painting with two coats of powder coated paint over a coat of red oxide primer on exterior and interior faces, errection of Bus Bar chamber duly grouted in PCC M-15, type B0 using 12.5 mm graded crushed stone aggregate including earth work complete all as specified and directed.

Supply and fixing in replacement of street light luminaire of HPSV with LED street light fitting consist of die cast body with heat resistant toughened glass having IP 65 protection level of 45 Watts complete all as specified and directed. Make- Havells part No. ENDURAPEARLNEOSL45WLED757PASYTOPC or Eqvt Make of Philips/CG/ Wipro/Bajaj/Halonix.

All as per item No 35 above but of of 70/72 Watts. Make- Havells part No. ENDURACITYLINERNEOSL70WLED757PASYBOTG or Eqvt Make of Philips/CG/ Wipro/Bajaj/Halonix.

Supply and Fixing in replacement with 1.0 sqmm 3 core PVC insulated and PVC round sheathed multistranded copper conductor flexible industrial cable 1100 V grade drawn through supply and fixing PVC conduit (junction box to street light fitting) in street light poles and Disconnection of street light fittings and refixing complete all as specified and directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 25X4 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, and cover 6 mm thick in cement concrete (1:2:4) type B1, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 1.0 OHMS. Note- In case earth resistance more than 1.0 ohms, the contractor wiil re earthing at no extra cost.

M&L in replacement of FRP junction box of size 300 X 200 X 105 mm having 4 Nos aluminium bus bar of size 25X4 mm fixed on epoxy insulators with MCB SP 6 Amps,fixed on the pole with 02 Nos clamps,nut bolts etc.complete all as specified and directed. Make- Sintex or equivalent.

S&F in repairs for rigid non-metallic PVC conduit of 20 mm dia heavy duty along steel tubular swaged poles for wire from junction box to fittings fixed with 04 Nos MS clamps complete all as specified and directed.

Supply and fix in replacement of Volt meter 0-600 volts, digital type of size 96mm x 96 mm square ,flush mounted type having lamp accurracy glass --1 complete all as specified and directed.

Supply and fix in replacement of amp meter 0-200 amp digital type of size 96mm x 96 mm square ,flush mounted type having lamp accurracy glass --1 complete all as specified and directed.

Supply and fix in replacement of indicating LED lamp set RYB for phase indication operating on 240 volt, 50 HZ, AC with new one LED panel mounting type to match existing one complete all as specified and directed.

Notes for Srl Item No. 1.00 to 22.00:-. GUARANTEE FOR LED LUMINARIES and others items : All LED luminaries and other incorporated in the subject work shall be guarantee for a minimum period of 02 (Two) years from the date of issue of completion certificate. Any part / work found defective during these periods shall be replaced or rectified by the contractor at his own cost. Contractor shall also submit Manufacturer’s test certificate, Purchase Vouschers and Guarantee certificate of LED light fittings and other items mentioned.

M/s Shakti Electric Works

M/S SATPAL & BROTHERS

M/s. Rishav Sood

Multicare Enterprises Pvt. Ltd.