Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | ₹12.8 L Quoted ₹13.0 L | L1 | Accepted-AOC Awarded being lowest as per NIT |
| 2 | L2₹15.0 LRejected-Finance FIRDOUS ABAD BATMALOO SRINAGAR PIN 190004 J K | SRINAGAR | SRINAGAR | J K | 190004 | ₹15.0 L | L2 | Rejected-Finance Rejected being L2 bidder |
| 3 | L3₹15.8 LRejected-Finance | ₹15.8 L | L3 | Rejected-Finance Rejected being L3 bidder |
| Sl No | Description | Qty | Unit | Top Mind Industries Pvt Limited L3 | M/S BHAT ENGINEERING WORKS L1 | VEDA INFRASTRUCTURE L2 |
|---|---|---|---|---|---|---|
| 1.00 | Attending day to day/daily complaints by employed skilled staff, checking the serviceability of fan coil units and Air Conditioners of any capacity for having continuous serviceability of FCU/ AC for any number of times as desired by Engr-in-Charge including renewal of minor spare parts like gasket, Electronic boards and components, Teflon tape, flare nut, tightening of any loose glycol connections, shifting FCU/ AC from one place to another place if required, heating up the freezed glycol line anywhere about the premises to have continuous flow of glycol fluid, repairing the insulation pipes of any size by providing shallow pipe/ GI pipe as deemed fit for failing the insulation of pipe line, tightening the loose electrical connections as related with FCU/ AC, heating system, cleaning the air filter including radiator of FCU to the entire satisfaction of Engr-in-Charge all as directed. (i) Attending complaints of different nature in a single day in entire Grn including ops room and MI room will be considered one job.
(ii) Any renewal of major parts will be measured and paid separately under respective items of Sch A.
(iii) Any nature of complaints related to FCU, radiator, bursting /cracking/leakage MS pipe lines, renewal of valves etc will be completed round the clock by skilled tradesman (welder with suitable T&P including potable heating materials, skilled mech of CHS, plumber/fitter with helper, supervisor).
(iv) Job slip will be maintained by the contractor supervisor under the supervision of JE E/M.
(v) Any delay, of more than 48 hrs from intimation, in attending complaints will be reported to higher authorities and a recovery of Rs 1000 will be deducted from contractor. | 25 | Each Job | 450 ₹11,250 | 990 ₹24,750 | 940 ₹23,500 |
| 2.00 | Disconnecting all electrical connection from central heating burner of Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintenance , removing worn-out/defective spare parts and the renewal of defective parts including servicing and testing on completion, complete all as specified.
Note :- Cost of spares/parts to be renewed will be measured and paid separately. | 4 | Each Job | 7,200 ₹28,800 | 600 ₹2,400 | 1,430 ₹5,720 |
| 2.01 | Supply only Ignition Transformer suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss | 2 | Each | 4,950 ₹9,900 | 3,350 ₹6,700 | 3,500 ₹7,000 |
| 2.02 | Supply only oil flow sequence controller suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss | 2 | Each | 7,650 ₹15,300 | 3,750 ₹7,500 | 4,100 ₹8,200 |
| 2.03 | Supply only Fuel feed pump suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss | 2 | Each | 8,550 ₹17,100 | 3,350 ₹6,700 | 4,000 ₹8,000 |
| 2.04 | Supply only Photocell suitable for burner suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss | 3 | Each | 1,620 ₹4,860 | 550 ₹1,650 | 590 ₹1,770 |
| 2.05 | Supply only Nozzle suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss | 2 | Each | 3,690 ₹7,380 | 400 ₹800 | 690 ₹1,380 |
| 2.06 | Supply only Solenoid valves suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss | 2 | Each | 500 ₹1,000 | 800 ₹1,600 | 1,000 ₹2,000 |
| 3.00 | Disconnecting all electrical connection from central heating burner of Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintenance , removing worn-out/defective spare parts and the renewal of defective parts including servicing and testing on completion, complete all as specified.
Note :- Cost of spares/parts to be renewed will be measured and paid separately. | 4 | Each Job | 7,200 ₹28,800 | 650 ₹2,600 | 1,000 ₹4,000 |
| 3.01 | Supply only Ignition Transformer suitable for burner Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr
Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss. | 3 | Each | 4,950 ₹14,850 | 3,350 ₹10,050 | 2,700 ₹8,100 |
Updated dates
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
10 Nov 2025, 6:00 pmClosed
HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS, C/O 56 APO, PIN- 914133
CWEK/TOKEN-86/874 EWS/2025-26-REPAIR/MAINT OF SPACE HEATER, CENTRAL HEATING SYSTEM AND CENTRAL WATER HEATING PLANTS AT DIFFERENT LOCATIONS IN THE AOR OF AGE E/M UNDER GE 874 EWS
2025_MES_734988_1
CWEK/TOKEN-86/874 EWS/2025-26
Open Tender
Electrical and Maintenance Works
270 days
GE 874 EWS
Class E and above and category c i
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹34,000
HQ 133 WORKS ENGRS
14 Jan 2026
14 Oct 2025
18 Nov 2025
14 Oct 2025
10 Nov 2025
28 Oct 2025
14 Oct 2025 - 18 Oct 2025
21 Oct 2025
Amount
Attending day to day/daily complaints by employed skilled staff, checking the serviceability of fan coil units and Air Conditioners of any capacity for having continuous serviceability of FCU/ AC for any number of times as desired by Engr-in-Charge including renewal of minor spare parts like gasket, Electronic boards and components, Teflon tape, flare nut, tightening of any loose glycol connections, shifting FCU/ AC from one place to another place if required, heating up the freezed glycol line anywhere about the premises to have continuous flow of glycol fluid, repairing the insulation pipes of any size by providing shallow pipe/ GI pipe as deemed fit for failing the insulation of pipe line, tightening the loose electrical connections as related with FCU/ AC, heating system, cleaning the air filter including radiator of FCU to the entire satisfaction of Engr-in-Charge all as directed. (i) Attending complaints of different nature in a single day in entire Grn including ops room and MI room will be considered one job. (ii) Any renewal of major parts will be measured and paid separately under respective items of Sch A. (iii) Any nature of complaints related to FCU, radiator, bursting /cracking/leakage MS pipe lines, renewal of valves etc will be completed round the clock by skilled tradesman (welder with suitable T&P including potable heating materials, skilled mech of CHS, plumber/fitter with helper, supervisor). (iv) Job slip will be maintained by the contractor supervisor under the supervision of JE E/M. (v) Any delay, of more than 48 hrs from intimation, in attending complaints will be reported to higher authorities and a recovery of Rs 1000 will be deducted from contractor.
Disconnecting all electrical connection from central heating burner of Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintenance , removing worn-out/defective spare parts and the renewal of defective parts including servicing and testing on completion, complete all as specified. Note :- Cost of spares/parts to be renewed will be measured and paid separately.
Supply only Ignition Transformer suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only oil flow sequence controller suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only Fuel feed pump suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only Photocell suitable for burner suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only Nozzle suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only Solenoid valves suitable for burner Make: Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: - Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Disconnecting all electrical connection from central heating burner of Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintenance , removing worn-out/defective spare parts and the renewal of defective parts including servicing and testing on completion, complete all as specified. Note :- Cost of spares/parts to be renewed will be measured and paid separately.
Supply only Ignition Transformer suitable for burner Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss.
Supply only oil flow sequence controller suitable for burner Make: Ecoflame Model Minor-14 DTC Max pressure 2 bar)and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss.
Supply only Fuel feed pump suitable for burner Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only Photocell suitable for burner Make: Ecoflame Model Minor-14 DTC Max pressure 2 bar)and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss .
Supply only Nozzle suitable for burner Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss,
Supply only Solenoid valves suitable for burner Make: Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss,
Disconnecting all electrical connection from boiler and dismantling burner of Make: Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 from inlet opening central heating plant and set aside for repair and maintenance , removing worn-out/defective spare parts and the renewal of defective parts including servicing and testing on completion, complete all as specified. Note :- Cost of spares/parts to be renewed will be measured and paid separately.
Supply only Ignition transformer suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss.
Supply only oil flow sequence controller suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss.
Supply only Fuel feed pump suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss.
Supply only Photocell suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss.
Supply only Nozzle suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Supply only Solenoid valves suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 bar and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make: Ecoflame/ Suntec/ Siemen/CE/ Danfoss
Dismantling boiler of capacity 200000/ 100000 Kcal/hr by disconnecting all electric connections and unscrewing glycol tubing to isolate combustion chamber of boiler . Opening the inlet cover of Boiler by unscrewing the nut bolt and taking out the unserviceable coil made out of MS from the chamber with engagement of Tripod and chain pulley without damaging internal chamber including cleaning of carbon content(scaling) to max clean with the help of heavy duty compressor including disposal of waste outside of cantonment area and renewal of defective parts of boiler complete all as directed by Engr-in-charge. Note :- Cost of spares/parts to be renewed will be measured and paid separately.
Supply only burnt fire create matti all as specified
Supply only asbestos foam all as specified
Supply only Inner glycol tubing of all as specified
Supply only Inner Piping Glass of all as specified
S&F of Asbestos Rope on Exhaust of boiler central heating plant up to wall all as specified and directed.
S&F in renewal of pressure gauge suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified
S&F in renewal of transparent Fuel Filter suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified
S&F in renewal of fuel pipe for fuel pump suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified
M&L in renewal of fuel tee suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified
S&F butterfly gate valve 80 mm dia having nitrate seat and epoxy coated disc CI with hand leaver pressure rating PN 1.0 complete all as specified and directed. Make: - C&S/ kirloskar/ Zoloto.
S&F air release valve (ARV) to automatically release trapped air from a heating system 25mm dia. complete all as specified and directed. Make: - C&R/ kirloskar/ Zoloto.
Disconnecting all electrical connections from blower and motor of Air handling unit at (Make: thermax) blower compartment including dismantling of all pre filters, microfilters, aluminium perforated sheet over glass fibre wool panels , blower motor including connecting after repair / renewals of defective parts including servicing and testing on completion, all as specified and directed by Eng-in-Charge. Note :- Cost of spares/parts to be renewed will be measured and paid separately.
Supply only prefilters having aluminium frame as per sample
Supply only Micro filters having aluminium frame as per sample
Supply only aluminium perforated sheet panel over 50 mm thick glass fibre wool as per sample
Supply only centre bearings for blower shaft including CI housing all as per sample
Supply only V belts of size B77 all as specified
Supply only foam for AHU shatters all as specified
M&L for repair of radiator by checking leakage of copper tubes and descaling of Glycol tubing including welding greasing as required at site complete all as specified and directed.
M&L for cleaning the chimney of heating plants from inside with wire brushes and removing away all carbon deposited and painting the outer surface of the chimney with two coats of heat proof black paint after preparing the surface for repainting complete all as directed.
S&F in renewal decorative wall mounted fan coil units of capacity 4500 Kcal/Hr CFM 470 upto 2 ton capacity complete with grill, ESB casing 3 speed motor, wall mounting brackets inlet out let mainfold complete all as specified and directed by Engr-in-Charge. Make: - Western Model No WFC-4 or equivalent in Caryaire/ zeco/ airflow.
Repair of damages in CHS pipeline system with SMAW/ GMAW/ GTAW welding work, including electrodes/ filler material, for one damage of upto 2 meters long on the pipeline complete all as directed.
Supply, laying, connecting , fixing and testing in renewal of 3 layer poly propylene random copolymer composite pipes 25mm/20mm bore OD pipe conforming to PN1.6 complete with fittings duly insulated with 13mm thick closed cell elastomeric insulation 30 to 40 Kg/m3 density all as specified and directed by Engr-in-Charge.
M&L for Insulation of MS Pipe 25 mm bore with PUF slab 30 mm thick and GI cladding with 26 gauge GI sheet complete all as specified and directed by Engr-in-Charge
M&L for Insulation of MS Pipe 32 mm with PUF slab 30 mm thick and GI cladding with 26 gauge GI sheet complete all as specified and directed by Engr-in-Charge
S&F in renewal of gun metal steam stop valve of 20mm bore screwed on both ends. Make: Sant/ CIM/ Zoloto
S&F in renewal of gun metal steam stop valve of 15mm bore screwed on both ends. Make: Sant/CIM/Zoloto
S&F in renewal of heavy duty wire mesh bounded fuel pipe with flare nut both ends 600 mm length as per sample complete all as directed by Engr-in-Charge.
S&F in renewal of fuel filter element as per sample complete all as directed by Engr-in-charge.
Repair and maintenance of wall mounted type Fan coil unit ( Inner Unit complete) of Make: Western model - WFC-04/ WFC-3000 after disconnecting electric connections including servicing and washing of condenser and renewal of defective parts with existing Make: (Capacity upto 4500Kcal/Hr) and specifications as approved by the GE. Note :- The cost of labour for repair and renewal of worn out/defective spare parts included in this item and parts to be replaced shall be measured and paid separately and minor part included with this like tap roll etc.
Supply, Installation, Commissioning and testing of Blower motor for FCU of Make: Western model No WFC-04/ WFC-3000 or equivalent complete all as specified and directed.
Supply, Installation, Commissioning and testing of PCB for FCU of Make: Western model No WFC-04/ WFC-3000 or equivalent and for Air Conditioner of capacity upto 2 ton complete all as specified and directed.
Supply, Installation, Commissioning and testing of display board for FCU of Make: Western model No WFC-04/ WFC-3000 complete all as specified and directed.
Supply, Installation, Commissioning and testing of Nozzle for inner units for FCU of Make: Western model No WFC-04/ WFC-3000, as per sample complete all as specified and directed.
Supply, Installation, Commissioning and testing of Pressure Valve for inner units for FCU of Make: Western model No WFC-04/ WFC-3000, as per sample complete all as specified and directed.
Supply, Installation, Commissioning and testing of Steel Rings for for stoppage of leakage in inner units pipe for FCU of Make: Western model No WFC-04/ WFC-3000, as per sample complete all as specified and directed.
S&F 32mm bore gun metal globe gate valve Suitable for CHS Western Model (ISI marked) iron wheel head, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Supply and filling of Glycol in the central heating system the glycol shall sustain upto a temperature of minus 40 degree without freezing complete all as specified and directed by Engr-in-charge. Make: : Castrol/Deronex
Supply only photocell 4 suitable for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only for thermostat Controller Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only panel board switch or Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Digital Meter for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Sub Zero for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Fuel Filter for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Fuel Pipe for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only X-Nipple for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Ignition for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Blower Motor for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only for Sequence Controller for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Fuel Pump for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only for Nozzle for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only photocell suitable for Alfa Therm/ Rapid cool / Thermax/Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only sequence controller cum Input ignition transformer 220 Volts having out/input 11 KV to 14 KV with base connection plate of suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete as per sample complete all as directed & specified.
Supply only Input ignition transformer 220 Volts having out/input 11 KV to 14 KV suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete as per sample complete all as directed & specified.
Supply only Ignition electrode suitable for Alfa Therm/ Rapid cool / Thermax /Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Solenoid coil suitable for Reillo burner for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Solenoid valve suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only Fuel filter body suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only Fuel filter suitable for Hot Water Boiler of Make: : Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only Fuel pump for burner suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only Sequence controller complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only motor for burner suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only coupling for burner suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only hydraulic ram for burner suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only ignition cable ram for burner suitable for Alfa Therm / Rapid Cool / Thermax /Western boiler complete all as per sample all as specified and directed by Engineer-in-Charge
Supply only Digital temperature controller suitable for Rapid Cool / Thermax /Western boiler complete all as per sample all as specified & directed by Engr-in-Charge.
Supply only nozzle of suitable size with new one and connected items for burner assembly of hot water generator. Make: Alfa Therm / Rapid Cool / Thermax /Western model
M&L rewinding of electric motor 2/3 HP 3 phase 415 Volts with suitable size super enamelled copper wire and insulation as per existing gauge and rating complete all as specified and directed by Engr-in-Charge.
S&F in renewal of pressure jet burner assembly suitable for light oil firing with step less modulation mechanism all as per manufacturer design and of required head and capacity hot water generator including all other connected items all as directed by Engr-in-Charge. Make: Alfa Therm / Rapid Cool / Thermax model
M&L for repair of electrical panel of boilers including renewal of indicator lamp, switch, contactor, MCB, relay of appropriate rating etc to make electric panel fully functional complete in all respects all as specified and directed by Engr-in-charge.
M&L for Insulation of GI Pipe of dia 50 mm with PUF slab 30 mm thick with and including applying bituminous compound and Aluminium cladding with 26 gauge Aluminium sheet after tightening the slabs with Aluminium tape complete all as specified and as directed
M&L for Insulation of M S Pipe of dia 40 mm with PUF slab 30 mm thick with and including applying bituminous compound and Aluminium cladding with 26 gauge Aluminium sheet after tightening the slabs with GI wire complete all as specified and as directed
Taking down old insulation of MS water tank and S&F for insulation of Cylindrical shaped horizontal placed with kaflex of thickness 25mm with factory laminated aluminium vapour barrier, thickness of insulation 26 SWG and including the following:- (a) M&L for cleaning the surface (to be insulated ) by scrapping carefully with wire brush etc. to Make: the surface completely free of mill scale, dirt, dust, grease and other foreign materials. (b) M&L for applying rubber based adhesive CPRX compound. (c) M&L for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to Make: the insulation leak proof. (d) M & L for securing the insulation with and including GI wire by tightening it latitudinally with the insulation. (e) M&L for cladding the insulation with 26 gauge aluminium sheet including riveting work complete as specified and as directed by Engineer-in-Charge.
S&F over load relay suitable for motor contractor complete all as per sample all as specified & directed by Engr-in-Charge.
S&F in renewal of Pressure gauge of size 4" for suitable size of pipe line and connected items all as specified and directed by Engr-in-Charge.
S&F thermocouple/RTD suitable for Hot water boiler of capacity 1,00,000.00 KCal/hr all as specified and directed by Engr-in-Charge. Make: Alfa Therma /Thermax / rapid cool/Western
Taking down unserviceable water tank of capacity 500/1000 Ltr for repair and refixing the same after repair complete all as specified and directed by the Engr-in-Charge.
VEDA INFRASTRUCTURE (BID ID -3471345)
Top Mind Industries Pvt Limited (BID ID -3470836)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BOQ_823018.xls
BOQ • 0.33 MB
TOKEN86.pdf
Tender Documents • 1.11 MB
Download all tender documents and submit your bid