Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-Finance | L1 | Accepted-Finance Qualify as per BOQ | |
| 2 | L2₹19.3 L+₹56,271 (3.00%)Accepted-Finance GATE NO 3 DIBRUGARH NEAR LANCO POWER PLANT ANPARA SONEBHADRA | ANPARA | SONEBHADRA | UTTAR PRADESH | L2 | Accepted-Finance Qualify as per BOQ | |
| 3 | L3₹19.5 L+₹73,920 (3.94%)Accepted-Finance | L3 | Accepted-Finance Qualify as per BOQ | |
| 4 | Rejected-Technical | - | Rejected-Technical Technically not qualified. Documents submitted at PQC point no. 8,9,10,14 , 16 are not as per PQC |
Tender Value
₹19.4 L
EMD Value
₹39,000
Closing Date
10 Jun 2022, 5:00 pmClosed
SE, OMC-IV, DTPS, Anpara
Office of SE, OMC-IV, DTPS, Anpara
Routine Breakdown maintenance of HT, LT power and control cables Electrical hoist and all exhaust fan and ventilation system at various places of EMD-II, 2x500MW, DTPS, Anpara
2022_RVUNL_698578_1
05/EMD-II/DTPS/2022-23
Open Tender
Electrical Works
Fixed-rate
365 days
EMD-II, DTPS, Anpara
As per Tender documents
3 documents required · 3 mandatory
₹1,180
Dy. CAO CFA and BO, DTPS, Anpara
₹39,000
23 Dec 2022
11 May 2022
13 Jun 2022
12 May 2022
10 Jun 2022
12 May 2022
Amount
Part-A
Routine maintenace of HT/LT power cables & control cables
Floor cleaning of cable vaults/galleries
Daily upkeeping of all mechanical and Electrical part of Electric hoist
Operation of Electric Hoist
Routine/Breakdown maintenace of all exhaust fan and vetilation system at various places
Part-B
Salvaging of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150 Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Laying of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150 Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
End Termination of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Straight through joint of HT cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Repairing/Tapping of HT cable of cables of following sizes above 70 sqr.mm.
1CX630 Sq.mm, XLPE, 11 KV
3CX185 Sq.mm, XLPE, 11 KV
1CX300 Sq.mm ,XLPE, 3.3 KV
1CX150Sq.mm, XLPE, 3.3 KV
3CX185 Sq.mm, XLPE, 3.3KV
Opening of HT cable terminal box & disconnection of power cable (Rs. per Job)
Connection of HT Power cable and cleaning of Terminal Box (Rs. per Job)
Salvaging of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Laying of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
End Termination of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Straight through joint of LT cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Repairing/Tapping of LT cable of cables of following sizes above 70 sqr.mm.
1CX 95 to 120 Sq.mm
1CX 400 to 630 Sq.mm
2CX 70 to 120 Sq.mm
3CX 95 to 240 Sq.mm
3.5CX 95 to 240 Sq.mm
Miscellaneous works related with maintenance of cable racks, cable tray, risers, reducers, bends, elbows etc.
Replacement of deteriorated M.S. Trays of different Sizes.
Fabrication and fixing of cable rack& other M.S. structure.
Erection of junction boxes of different sizes.
Erection of riser, reducer, Elbow etc.
Erection after modification of various type of TPN switch/starter maximum up to 400 Amp.
Removal, re -fixing of tray covers in Boiler area.
Removal and re-fixing of chequer plates or grid on Boiler floor for attending cable fault on beneath the racks
Providing new tray cover at different locations&clamping there of as per size
Provide cable markers as danger board at every 10 meter to Avoid damage to under ground cables by grouting 2 Ft. long angle pieces wherever required.(as per scope of work)
Digging of earth for locating and attending the faulty portion of cable and refilling in the same manner after attending the fault.(as per scope of work)
Writing of nomenclature in size of 1-1/2 inch as and when required anywhere on the panel board.(as per scope of work)
Painting of trays/plates or other M.S. structure with red oxide primer with material.(as per scope of work)
Painting of trays/plates or other M.S. structure with synthetic enamel of reputed brands. Asian paints/Berger/Nerolac with material. (as per scope of work)
Cutting & disposal of grass, wild plants, shrubs, etc. as per scope of work for approx. 60,000 Sq.mtr.
Alignment and Surface preparation of mono rail of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Breakdown maintenance / servicing of traverse Motor Gearbox Assy.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Breakdown maintenance / servicing of Rotary Motor Gearbox Assy.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Servicing of Hooks, Rope Pulley, Break shoe of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Rectification / Replacement of wire rope of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Smoothening of swirling/ Twisted rope of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Attending fault after Lowering& Lifting the hoist of Electric Hoist.
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Replacement / Repairing of rope rails/ DSL and its proper alignment work.
Laying of flexible cable
Shifting of LT motor from site to repair shop/ place of work/ site store or vice versa
40 Ton ID Fan
17.5 Ton FD & PA Fan
10 Ton to 15 Ton Bowl Mill
1 Ton to 8 Ton
Attending electrical breakdown
M/S SHYAM ERECTORS
M/s STAR ELECTRICALS
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .