Upgradation of General Toilets at North and South blocks and Providing/Fixing of See through Fencing/Railing in Front of Sehkari Bhawan, Gupta Tower Complex and some other panels at Bahu Plaza, Jammu(2nd Time)

Amount

Providing and fixing white Vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340x 410x 265mm sizes repectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets,cutting and making good the walls and floors wherever required: One urinal basin with 5 Liter White P.V.C automatic cistern.

Providing and fixing PVC low level flushing cistern with manually controled device (handle lever) canforming to IS:7231 with all fitting and fixtures complete 10 litre caoacity-White

Providing and fixing wash basin with C.I brackets,15mm PTMT piller cock, 32 mm PTMP Waste coupling of standrd pattern including painting of fitting and brackets cutting and marking good the walls wherever required.White vitreous china flat back wash basin 550 x 400 mm with single 15mm PTMP cock

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long, weighing not less than 120 gms

Providing and fixing PTMT angle valve 15mm nominal bore, weighing not less than 85gms.

Providing and fixing PTMT bib cock of approved quality and colour15 mm nominal bore, 165 mm long, weighing not less than 110 gms

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour. Waste coupling 31 mm of 79 mm length and 62 mm breadth weighting not less than 45 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length

Providing and fixing PTMT Ball cock of approved quality, colour andmake complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.20mm nominal bore, 120mm long, weighing not less than 198gms

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 25 mm dia. nominal bore medium

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore medium

Renewing glass panes, with putty and nails wherever necessary includingraking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls completeincluding disposal of rubbish to the dumping ground within 50 meters lead 1With cement mortar 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

40mm thick fine dressed stone flooring over 20mm (average) thick baseof cement mortar 1:5 (1 cement: 5 coarse sand), including pointing withcement mortar 1:2 ( 1 cement : 2 stone dust) with an admixture ofpigment to match the shade of stone and curing complete.red sand stone

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished welded type tubes

Supplying at site Welded steel wire fabric of required width having rectangularmesh painted with two or more coats of enamel paint of approved shadeover a coat of primer (Priming & Painting to be paid for separately)

M/S PARVEEN AKHTAR

SHAKTI KUMAR