ADDNALTN CUM SPL REPAIR TO HARD STANDING SURFACE ALONGSIDE BLDG NO P4 OF 151 INF BN TAJAT JCOs CLUB AND BLDG NO P55 JCOs GOVT MARRIED ACCN AT MUZAFFARPUR MIL STN UNDER GE DANAPUR CANTT

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L old size brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L 15mm thick rendering on fair faces of bricks work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering (for floor rising due to water loginig area).

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone and boulders complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded aggregate in foundation, filling and mass concrete complete.

M&L for PCC 1:2:4 Type B1 as in sub base (using 20mm graded stone aggregate) 75 mm thick including Use and waste of necessary form work and to divide the area in panels Finish even and fair without using extra cement and finish the top layer with broom complete all as spd and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in coping, lintels, plinth course, cills etc complete all as specified and directed.

Forming 12mm thick Expansion joints for 200 mm thick concrete slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A' complete all as specified and directed.

Dismantling of floor, hearth or walls tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick square/rectangular) (joint free) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floor etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm as in skirting etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering or bedding layer in CM (1:4) complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for 10mm thick Light shade vitrified tiles in skirting, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering or bedding layer in CM (1:4) complete all as specified and directed.

M&L for screed bed or bedding layer in cement mortar (1:4) 20mm thick for laying floors finishes complete all as specified and directed.

M&L Chequred cement concrete tiles 20cm x 20cm x 25mm/ 30cmx30cmx25 mm thick set jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) on cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

M&L 5 mm thick rendering on fair faces of brick /concrete surfaces as on ceiling in CM (1:3), finished even and smooth (without using extra cement ) complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

The same as item No 23 above but exc 1.5 Sqm andn.exc. 4 Sqm each.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed.

S & F 30 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Same as item No 27 above but without glazing bar.

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.

S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc, complete all as specified and directed.

S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

S & F, Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prlam sheet, reinforced with MS square tube complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn spring, fixed in floor complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with stainless steel wire staple complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

S& F in repair 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F MS Peg set of six powder coated as approved by GE

S&F in repair mild steel conduit curtain rod with PVC coating fancy type 20 mm dia of any colour as approved complete all as specified and directed.

S&F mild steel Bracket with PVC coating fancy type for curtain rod of 20 mm dia of any colour as approved complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia.

Supply and laying of 16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified and directed.

Supply and laying of 20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hose complete all as specified and directed.

S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed.

S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed.

S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair of stainless steel soap dish, of standard size and shape complete.

S&F sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed.

S&F PVC (SWR) 'P' or 'S' trap for 110 mm dia etc complete.

S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed.

M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed.

S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.

M/L PVC (SWR) bend of 110mm dia of any radius etc complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door

The same as above item No.88 but 75 mm bore

S&F PVC (SWR) vent cowl 110mm bore

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs capacity complete all as specified and directed.

S/F in repair rotational moulded polyethylene water storage tank of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper on newly plastered surface complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 2mm thick wall care putty including preparation of new surface complete all as specified and directed.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified and directed.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 in cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls as directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

Material & labour for point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100 volt grade single core having multistandard copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only , on ceiling PVC conduit on surface will be used ) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches , sockets , fan regulator etc for the following.

One light point/fan point/ bell point controlled by one switch.

One three pin socket outlet 5 Amps on same board with other switches.

One 5 Amps socket out let point on independent board controlled by one switch.

The same as item NO 113 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fix switch piano flush button single pole one way 5 amps, 230 Volts complete all as specified and directed.

Supply and fix socket outlet flush type 5 Amps, 5 pin, 230 Volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed.

S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.

Supply and fix ceiling rose surface bakelite 63.5mm dia three terminal, fixied in repairs complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt .

Supply and fixing in repair bell multi music type AC 240 Volts, single pole complete all as specified and directed.

Supply and fixing batten / angular fittings complete all as specified and directed.

Supply and fixing of 9 watt LED bulb complete all as specified and directed.

Supply and fixing LED tube rod 18 watt 230 volt T 8 type made up of polycarbonate with in built electronic drver both sided connection with metal heat sink complete fixed with wall/ceiling incl fitting accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed.

S&F LED tube light batten box type with decorative end caps suitable single tube 1 x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/ceiling incl fitting accessories and connectiong with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix double door SPN DBs 8 way, 240 volt with 200 Amp rated bus bar SPN of powder coated DB's suitable for housing MCB's/Isolater, Neutral link, Earth bar and Din rail complete all as specified and directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and M & L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Juction boxes, elbows saddles. Pipe hooks, couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

S&F in repair with MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs completed all as specified and directed.

S & F in repair with MCB SPN 5 to 40 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F in repair of Earthing to panel with galvanised steel earth plate electrode 600mm X 600 mm X6mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 of MES Shedule pt 2009 GI earth lead strip protected by GI pipe 40mm dia light grade and connected and connected to earth test point including excavation in any type of soil , returning filling , disposal of soil , providing charcoal dust and common salt upto top edge of earth plate , construction of PCC pit with RCC cover , funnel ,watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

Please Enable Macros to View BoQ information