CONSTRUCTION OF DEFICIENT MARRIED ACCOMODATION FOR EPS AT ICGAS KOCHI

Amount

SCHEDULE ‘A’ PART-I (BUILDING & STRUCTURE WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EXCAVATION AND EARTH WORK ) /SITE CLEARANCE Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION)) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (FIRE FIGHTING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (TV & TELEPHONE LINE Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (LIFT & DG SET) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XIV (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

PILE FOUNDATION Boring Cast in situ DMC pile of 600mm dia to any depth through any type of soil/strata by DMC method using bentonite slurry including removal of bored materials outside MD land complete all as specifioed and directed. Note:- (i) The rate shall include mobilisation,erection,dismantling and demobilisation of equipment for pile boring including all labours and material. Nothing extra shall be payable for mobilisation of equipment separately. (ii) This item will be executed as per location marked in drg.

Boring Cast in situ DMC pile of 450mm dia to any depth through any type of soil/strata by DMC method using bentonite slurry including removal of bored materials outside MD land complete all as specifioed and directed. Note:- (i) The rate shall include mobilisation,erection,dismantling and demobilisation of equipment for pile boring including all labours and material. Nothing extra shall be payable for mobilisation of equipment separately. (ii) This item will be executed as per location marked in drg.

Reinforced cement concrete of grade RMC M-30 design mix as per IS – 456 with using 20mm graded stone aggregate in cast in situ bored pile of any length/any sections complete all as specified and as shown on drg as in bored pile including destructive integrity test on all pile as per IS-14893,2001 part-IV. (Note: The unit rate quoted under this item is deemed to be inclusive of charges for non destructive integrity test)

RCC grade RMC M-30 design mix as per IS–456 using 20mm graded stone aggregate in pile caps complete all as specified and shown on drg. Notes for Sl item Nos 14.03 & 14.04 :- Reinforcement shall be measured and paid for separately under relevant items of this Schedule.

Providing TMT bars (CRS/HCRM/CRM) in reinforcement 10mm dia and over for bored piles of any length and any dia all as shown on drgs including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and shown on drgs.

Ditto All as per item No 14.05 here-in-before but for pile caps complete all as specified and directed.

Providing TMT bars (CRS/HCRM/CRM) in reinforcement 5mm dia and over upto and including 12mm dia conforming to IS-1786 as in stirrups for pile caps and grade beams cut to length bent to shape required and binding with mild steel wire (annealed) not less than 0.9mm dia or welding.

Providing TMT bars (CRS/HCRM/CRM) in reinforcement 5 mm dia end over up to and including 10mm dia conforming to IS-1786 as in Helical/stirrups for piles cut to length, bent to shape required, and binding with 0.9mm dia MS annealed wire or welding .

Providing TMT bars (CRS/HCRM/CRM) in reinforcement over 10mm dia conforming to IS-1786 as in Helical/stirrups for piles cut to length, bent to shape required and binding with 0.9mm dia MS annealed wire or welding .

PCC 1:4:8 type D2 using 40mm graded stone aggregate for concrete layer below pile caps and foundation complete all as specfified and as shown in drg

PCC 1:2:4 type B2 using 40mm graded stone aggregate for concrete layer below pile caps and foundation complete all as specfified and as shown in drg

Formwork to sides of concrte foundation, pile caps rough finished surface of concrete flat. All as specified and as directed.

Excavation over area not exc 1.5m in depth for foundation in soft/loose soil for pile cap/plinth beam/tie beam all as specified and directed.

Excavation over areas in water, liquid or mud and interupted by tides exc. 1.5mt, not exc 3.0m in depth for foundationfor pile caps/ pile in soft/loose soil all as specified and directed.

Returning/filling in layers and ramming in layers around pile cap,plinth beam etc using excavated soil incl sprading,levelling,well ramming in layers not less than 25cm thick all as specified and directed.

Removing excavated material exc 1.5Km n.exc 5Km and depositing where directed at a level n.exc 1.5m above starting point all as specified and directed.

Testing of piles (Initial load test for compression load, lateral load and uplift load) all as per IS 2911 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed for 600mm dia cast in situ pile. Note : Rate is inclusive for casting of 04 piles for above test. However, boring, concrete and steel shall be measured and paid under respective item .

Testing of piles (Routine Load test) all as per IS for 600mm dia Cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. Note : Only compression load test shall be carried out for Routine Load test

Testing of piles (Initial load test for compression load, lateral load and uplift load) all as per IS 2911 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed for 450mm dia cast in situ pile. Note : Rate is inclusive for casting of 04 piles for above test. However, boring, concrete and steel shall be measured and paid under respective item all as specified and directed.

Testing of piles (Routine Load test) all as per IS for 450mm dia Cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. Note : Only compression load test shall be carried out for Routine Load test all as specified and directed.

M & L for MS sheet piling includes MS TEE/ CHANNEL/ I.SECTION as required at site to protect the men/ material during excavation over areas n.exceeding 4m deep complete all as specified and directed.

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS : 8884-1978 complete all as specified and directed. Make : Legrand Arteor Cat Part No 573459 or equivalent in list of approved make enclosed.

S&F modular type 1 module TV socket complete all as specified and directed. Make : Legrand Arteor Cat - Part No 573425 or equivalent in list of appro ved make enclosed.

S&F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed. Make : Legrand Arteor Cat - Part No 573426 or equivalent in list of appro ved make enclosed.

S & F 15 W surface mounted LED down lightr having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F 10 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F wall mounted LED fitting with 10W LED lamp having luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F 20 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket 1.5 m long with including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and light grade GI pipe 20mm dia, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. Make: BAJAJ Cat-Part No. BAJAJ 169829 BCLST 20W LED I orequivalent in list of approved make enclosed.

S & F BLDC five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, power consumption 32W, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Atomberg model No - RENESA ALPHA or Havells Cat- Part No. ES-50 or equivalent model of Usha or BAJAJ.

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

S & F engery efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" or equivalent model of Usha, Havells or BAJAJ

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type BUILDING PANEL (G+8) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. The Building Feeder Panel shall comprise of the following:

[A] BUSBAR CHAMBER: [i] 01 Set (3L + N) of copper busbar of rated capacity 400 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING: [i] 250 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc - 1 Nos. [ii] LED phase indicators (Red, Yellow, Blue)- 01 Set [C] OUTGOING: [i] 40 A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz DP MCB. - 34Nos (For 34 QTR ) [ii] Space for energy meter- 34

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type BUILDING PANEL (G+8) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. The Building Feeder Panel shall comprise of the following:

[A] BUSBAR CHAMBER: [i] 01 Set (3L + N) of copper busbar of rated capacity 400 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING: [i] 250 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc - 01 Nos [ii] LED phase indicators (Red, Yellow, Blue)- 01 Set [C] OUTGOING: [i] 32 A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz DP MCB. -34 Nos(for 34 QTR ) [ii] Space for energy meter- 34

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge.(for Lift, Fire Pump and Coommon area Lighting from DG set) [A] INCOMING: (i) 63 Amps FP MCCB 01 No [B] OUTGOING: [i] 32 Amps TPN MCCB 05 Nos [ii] 3-phase energy meter (10 - 60 )Amp- 03 Nos (iii) 1-phase energy meter (10 - 60 )Amp- 03 Nos (iv)20 A, DP MCB, C- curve -2Nos (v) Astronomical Timer + DP contactor 01 Nos

Supply, installation, testing and commissioning of Cl1.0 accuracy ,Tamper Proof, high durability, sleek LCD display energy meters having current range 10-60 A, capable of measuring kWh parameters complete all as specified and directed.

1- Phase energy meter (10-60 Amp) Make: L&T Cat-Part No. WM101BC7DDH or equivalent model of Legrand or Havells

Ditto all as per Item No 14.38 above but 3- Phase energy meter (10-60 Amp) Make: L&T Cat-Part No. WR300BC7300 or equivalent model of Legrand or Havells

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed by engineer-in-charge. Make: Schneider, Legrand, Havells

6 A, SP MCB, C- curve

16 A, SP MCB, C- curve

20 A, SP MCB, C- curve

Supply, installation and commissioning of 5 star rated 25 Litres electric geyser having temperature sensitive LED indicators, shock safe plug, PUF insulation, including glass coated heating element, anode rod, adjustable knob, multi-functional safety valve with IP 4X protection all complete as specified and directed.

External Water Supply: Supplying and laying of GI Steel tubes, heavy duty, Class 'C' of size 80 mm including all standard fittings laid in trenches, floors etc. all as specified and directed by Engr-in-Charge.

Supplying and laying of GI Steel tubes, heavy duty, Class 'C' of size 50 mm including all standard fittings laid in trenches, floors etc. all as specified and directed by Engr-in-Charge. (inclduing 2 rising mains for each block)

Supply and fix sluice valve PN 1.0 of size 80 mm as per IS Specification complete with and including flanges, leather washers, rubber gasket, bolts, nuts all as specified and directed by the Engr-in-charge.

Supply and fix sluice valve PN 1.0 of size 50 mm as per IS Specification complete with and including flanges, leather washers, rubber gasket, bolts, nuts all as specified and directed by the Engr-in-charge.

Supply and fix non return sluice valve PN 1.0 of size 80 mm as per IS Specification complete with and including flanges, leather washers, rubber gasket, bolts, nuts all as specified and directed by the Engr-in-charge.

M & L Valve chamber of internal size 1.20 m X 1.20 m X 1.20 m (internal dimension) including excavation of earth work in any type of soil, 150mm thick PCC in 1:4:8 type D2 foundation , brick work in CM 1:6, 15 mm thick rendering in CM 1:4 to both internal and external surfaces upto 150mm depth below GL, PCC 1:3:6 type C1 as in coping, cover with two Nos of hinges and one No. handle made out of MS round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as specified. Note:- The estimated cost includes all earthwork and connected items.

External Electric Supply: Supply and spread LT Rubber mat of 1 mtr x 2 mtr x 19 mm

Supply,install,test and commision LT panel board,indoor type, factory made, powder coated , dust and vermin and weather proof, Cubicle type made out of 2 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands and provision for louvers and air vent gasket for natuaral flow of air . The panel board shall have suitable busbar chamber having sufficient space to pass through UG Cables and have compartments for each control gear and metering devices. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. (Main Panel) (FB-1) Copper busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 1000Amps for phases and 500 Amps for Neutral. Incoming:- ACB 4 pole, 415 Volts, manual draw out type with micro processor release of capacity 630 Amps-01 No. Metering Unit:- (a) R Y B Indications (LED Type) - 1 sets (b) Digital Multi function meter - 01 No. (c)CT's - 630/5A, CL-1,15 VA - 1 set Outgoing:- (a) MCCB, 4 pole, 415 Volts, 250 Amps, breaking capacity 36 KA- 01 Nos. (b) MCCB 4 pole,415 Volts, 200 Amps, breaking capacity 36 KA- 01 No. (c) MCCB 4 pole,415 Volts, 100 Amps, breaking capacity 36 KA- 03 No.

Supply,install,test and commision LT panel board,indoor type, factory made, powder coated , dust and vermin and weather proof, Cubicle type made out of 2 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands and provision for louvers and air vent gasket for natuaral flow of air . The panel board shall have suitable busbar chamber having sufficient space to pass through UG Cables and have compartments for each control gear and metering devices. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge.(DG Panel FB-2) Copper busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 250 Amps for phases and 160 Amps for Neutral. Incoming:- (a) Onload changeover switch 415 Volts AC,50 Hz, 4 pole 100 Amps.-01 No. (b) MCCB 4 pole,415 Volts, 100 Amps, breaking capacity 36 KA- 01 Nos. Metering Unit:- (a) R Y B Indications (LED Type) - 1 sets (b) Digital Multi function meter - 01 No. (c)CT's - 630/5A, CL-1,15 VA - 1 set Outgoing:- (a) MCCB 4 pole,415 Volts, 63 Amps, breaking capacity 36 KA- 02 Nos. (b) MCB, TPN, 415 Volts, C curve, 32 Amps, breaking capacity 10 KA- 02 Nos.

Supply,install,test and commisioning of LT feeder pillar box type panel,outdoor type, powder coated , dust and vermin and weather proof outdoor, Cubicle type, outer shell made out of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame , factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys, louvers & air vent gasket for natuaral flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2.0 mm thick CRCA Sheat duly compartmentalised for each control gear with louvers and air vent gasket for natuaral flow of air and suiatable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Location:- (Type-III -01 No. Type-II- 01 Nos).

Aluminium busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 400 Amps for phases and 250 Amps for Neutral. Incoming:- (a) MCCB 4 pole, 415 Volts, 250 Amps, breaking capacity 36 KA- 01No. Metering Unit:- (a) R Y B Indications (LED Type) - 1 sets (b) Digital Multi function meter - 01 No. (c )CT's - 250/5A, CL-1,15 VA - 1 set Outgoing:- (a) MCCB 4 pole, 415 Volts, 63 Amps, breaking capacity 36 KA- 02 Nos. (b) MCB TPN, 415 Volts, 32 Amps, 10 KA- 01 Nos.

Ditto all as per item No.14.55 above but with the following accessories. (Location: Pump House FPB - 01 no.) Aluminium busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 200 Amps for phases and 100 Amps for Neutral. Incoming:- (a) MCCB 4 pole, 415 Volts, 100 Amps, breaking capacity 36 KA- 01 No. Metering Unit:- (a) R Y B Indications (LED Type) - 1 sets (b) Digital Multi function meter - 01 No. ( c) CT's - 100/5A, CL-1,15 VA - 1 set Outgoing:- (a) MCCB, 4 pole, 415 Volts, 32 Amps, breaking capacity 36 KA- 01 No. (b)MCB, TP, 415 Volts, 32 Amps, 10 KA- 02 No. (c) MCB, SPN, 230 Volts, 32 Amps, 10 KA- 01 No.

FIRE FIGHTING: Supply, connect, joint and lay MS flanged pipe heavy duty ISI marked with all fittings of size 100 mm dia with flanged ends and including flanges, leather gaskets, heavy duty bolts, nuts, washers etc, laid in trenches,floors, fixed on walls/floors/roof ete including fixing with clamps on wall for the wet riser including painting with approved synthetic enamel paint all as specified and directed by Engr-in-charge.

Supply, connect, joint and lay MS flanged pipe heavy duty ISI marked with all fittings of size 80 mm dia with flanged ends and including flanges, leather gaskets, heavy duty bolts, nuts, washers etc, laid in trenches,floors, fixed on walls/floors/roof ete including fixing with clamps on wall for the wet riser including painting with approved synthetic enamel paint all as specified and directed by Engr-in-charge.

Supply & Fix Cast iron air release valve with single air outlet, conforming to IS 14845 of size 50 mm. dia. Bore and fixing up in Cast iron water supply mains complete aii as specified and directed by Engr-in-charge.

Supply, installation, testing and commissioning of Analog addressable type active Loop Repeater (Loop power/External power) fire terminal with inbuilt turbo isolator, Backlit LCD display 6 X 40 characters display, having controls for reset, mute, accept, silence alarms and self test with programmable free keys and duly approved by EN54/LPCB/VDS/FM Make:- SIEMENS/NOTIFIER/BOSCH

Supply, installation testing and commissioning of XLPE insulated electric cable with copper coductor of size 1.5 sq.mm, 2 core suitable for working pressure 1100 Volts to IS:7098 and drawn into PVC coduit pipe 20 mm. all as specified and directed.

S&F wall mounted LED emergency Exit signage luminaire Light up using regular mains supply comes with a unique rechargeable Ni-Cd battery capable of emergency back up upto 05 hours (Cat No LSSR5W Make CG or equivalent to Bajaj/havells.

Supply,install,test and commision LT feeder pillar box type panel,outdoor type, powder coated , dust and vermin and weather proof outdoor, Cubicle type, outer shell made out of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame , factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys, louvers & air vent gasket for natuaral flow of air. Suiable gasket shall be used to make the outer shell completely vermin proof. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2.0 mm thick CRCA Sheat duly compartmentalised for each control gear with louvers and air vent gasket for natuaral flow of air and suiatable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge.

Aluminium busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 200 Amps for phases and 100 Amps for Neutral. Incoming:- (a) MCCB 4 pole, 415 Volts, 63 Amps, breaking capacity 35 KA- 01 No.. Metering Unit:- (a) R Y B Indications (LED Type) - 1 sets (b) Digital Multi function meter - 01 No. (c ) CT's - 63/5A, CL-1,15 VA - 1 set Outgoing:- (a) MCB TPN 32 Amps "D" curve 10 KA - 2 Nos (b) Direct on line starter - 02 Nos (c) Single phase preventer - 01 Nos (d) Contactor suitable for 10 HP motor - 02 Nos (e) Provn for pressure switch -02 No

S & F fire extinguisher dry chemical powder (ABC) type (IS:15683) of capacity 4 Kg complete with installation brackets all as directed.

S & F fire extinguisher CO2 (light weight squeeze grip type) (IS:15683) of capacity 4.5 Kg complete with installation brackets all as directed.

S & F fire extinguisher Dry powder (ABC) (IS;15683) of capacity 4 kg.

S & F Fire extinguisher Mechanical Foam 9IS:15683) of capacity 9 Litres.

AVIATION LIGHTS: Supply and fix aviation obstruction light integral aviation light comprising of aluminmium housing with poly carbonate enclosure 302 nod LED. Make Bajaj Cat No. BGAV 302 LED/equivalent.

Supply,fix including testing comissioning XLPE insulated screened PVC bedded galvanised steel strip or wire armoured power cable (Heavy duty) 1100 V grade with stranded aluminium conductor of size 2 core 6 Sqmm on poles /walls as cable for aviation obstruction light all as specified and directed.

S&F timer switch and MCB SPN, 230 V, 10 Amp enclosed in a metal enclosure.

GEN SETS: Supply and install Static silent Disel Engine with accoustic enclosure, capable of delivering 50 Kw (62.5 KVA), water cooled, 415 volts (AC three phase, 4 wire system of supply) , frequency 50 Hz, at power factor 0.80 minimum. The DG set shall consists of a diesel engine coupled to a matching the alternator through flexible coupling and mounted on a common based frame and complete with control panel standardized by the manufacturer, fuel tank with mounting arrangements and with standard fuel pipes for inlet, outlet and return inlet oil arrangements, exhaust pipe, silencer and asbestrose rope protection complete and shall be suitable for conditions prevailed at Kochi. (Designed capacity of Diesel engine and alternator shall be worked out by considering all derating factors prevailed at the area to be installed) The foundation of Gen Set shall be as specified by the manufacturer and shall be mounted on a suitable Channel frame structure with anti-vibration pads and including all technical features to comply with latest CPCB guidelines and comprising of followings:- (i) DIESEL ENGINE (Prime Mover): Diesel Engine 1500 RPM, direct injection, four cylinders, four stroke, confirming to ISO3046/BS5514, water cooled, natuarally turbo charged, capable of giving adequate BHP to drive alternator capable of delivering 50 Kw(62.5 KVA) at outdoor atmospheric conditions at Kochi (Considering all derating factors prevailed in the area). Batteries 12/24 Volts and desired ampere hours (as per manufacturers recommendations), electric battery start, complete with fly wheel and all standard fittings and fixtures as per manufacturer and including suitable panel with techo meter, lub oil temperature, pressure gauge and frequently meters.

The engine shall have self starter, dynamo, FIP, oil pump, fuel electric control panel with mechanical governor (ECPG) and Engine protection system (Shut down, High water temperature, low lub oil, oil pressure, over speed etc. , recommented capacity of fuel tank and first filling of fuel and lub oil and other consumables etc. (ii) ALTERNATOR: Brushless AC alternator, 3 phase, 415 Volts, 4 wire rated for output of 50 Kw (62.5 KVA) minimum power factort 0.80, 1500 RPM, IP 23 ptotection class enclosure, insulation class 'H', salient pole, revolving field, single bearing, automatic voltage regulator coupled through flexible coupling with and match the above engine. (iii) BASE PLATE:- Made of structural steel as per manufacturers recommended design/specifications. (iv) ACOUSTIC ENCLOSURE:- Sheet metal fabricated canopy type, silent enclosure, manufactured on CNC machines as per CPCB norms and shall be powder coated. The enclosure shall be designed for reducing the sound level to 75 DB at a distance of 1 mtr at 75% load under field condition and 70DB at 3 M from Gen Set when DG set is working at full load along with testing performance, labeling certification etc. as laid down in GSR No. 371(E) dt 17 May 2002. (i) Foundation/Plinth/Base shall be provided as per manufacturers recommendations, however minimum 0.50 M space should be available all around the set and height of plinth shall not be less than 0.50 M. (ii) Standard Diesel Engine tank of adequate capacity for running the Gen Set continuously for 12 hours including standard pvc pipes from tank to FIP, overflow pipe from FIP to tank. (v) MISCELLANEOUS:- Tool kit, Operation and maintenance catalogue, spare parts list, overhauling manuals, guarantee cards, test certificate of Engine and alternator etc. shall be provided as per manufacturer standard practice. Note : Rate is inclusive of excavation and earth works and foundation cost as per manufacturers instructions. (b) DG Set shall conform latest emission norms of CPCB (CPCB3). rate quoted is inclusive of excavation and earthwork and cost of suitable foundation by the manufacturer.

(vi) AMF CONTROL PANEL:- factory made cubicle type floor mounted LT Panel board, indoor type made out of MS angle not less than 40x40x50 mmand 2 mm thick MS CRCA Sheet, front opening type, protection class IP-54, duly powder coated, copper bus bar with coloured PVC sleeves and of suitable rating for four poles mounted on suitable porcelain insulators at recommended intervals, with all standard switch gear and protection, intyernal wiring with adequate size and rating PVC insulated multistranded copper conductor cables etc. and also consisting the following: Copper busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 600 Amps for phases and 300 Amps for Neutral. Incoming:- (a) MCCB 4 pole,415 Volts, 200 Amps, breaking capacity 36 KA- 02 Nos. Metering Unit and other accessories :- (a) R Y B Indications (LED Type) - 1 set. (b) Indicator for on/off GEN/MAIN supply- 2 Nos. (c) Digital Multi function meter - 01 No. (d) CT's - 250/5A, CL-1,15 VA - 1 set (e) 3 pole line Contactorwith AC coil, 150 Amps- 2 Nos. (f) All standard relays, circuits and protection required for automatic operation of DG set. (g) Charger for recharging the battery and armoured copper cable of suitable rating from battery charger to the engine- one job. Outgoing:- (a) MCCB 4 pole,415 Volts, 160 Amps, breaking capacity 36 KA- 02 Nos.(one spare)

M & L Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No. 3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia GI watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete.

M & L Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth wire 4 mm dia. by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete.

PV Modules: The PV Modules must qualify to the latest edition of any of the following IEC/equivalent BIS Standards for PV moudle design qualification test and type approval: mono Crystalline Silicon Terrestrial PV Modules : IEC 61215/IS14286 and Energy density >390W/sqm

(a) In addition, the modules must confirm to IEC 61730 Part I requirements for construction & Part 2-requirements for testing, for safety qualifiation or equivalent IS .

(b) For the PV modules to be used in a highly corrosive atmosphere thourghout their life time, they must qualify to IEC 61701. SK

(c) Identification and traceability ;- Each PV module must use a RF identification tag (RFID) which must contain the following information:-

(i) Name of the manufacture of PV Module.

(ii) Name of the manufacturer of Solar cells

(iii) Month and year of the manufacture (separetely for solar cells and module)

(iv) Country of orign (separately for solar cells and module)

(v) I-V curve for the module

(vi) Peak Wattage, Im, Vm and FF for the module.

(vii) Unique serial No and model No of the module

(viii) Date and year of obtaining IEC PV module qualification certificate

(ix) Name of the test lab issuing IEC certificate

(x) Other relavent information on traceability of solar cells and module as per ISO 9000 series . Note : RFID shall be mandatorily placed inside the module laminate.y of solar cells and module as per ISO 9000 series

(d) AUTHORISED TESTING LABORITIES/CENTRES: PV Modules must qualify (enclose test reports/certificate from IEC/NABL accredited laboratory) as per relevant IEC standared. Additionally the performance of PV Modules at STC conditions must be tested and approved by one of the IEC/NABL Accredited Testing Laborities including Solar Energy Centre. Qualifiaction certificate from IEC/NABL accredited laboratory as per relevant standared for any of the higher wattage regular module should be accompanied with the STC report/certificate . For details of test labs refer Minstry of New and Renewable energy website. The report submitted should not be older than 2 years.

Following are included in the scope as at para 1

a) MOUNTING STRUCTURE ;- (a) Module mounting structure may require to customize with respect to the site availability. (b) Modules shall be mounted on a non-corrosive HDG support structures. (c) All the panels shall have provision to adjust it at three angular position i.e latitude angle (o), latitude angle (-15), latitude angle(+15). The locking arrangement for adjusting the angle of module shall be accessible from the ground. (d) The base columns shall be made of reinforced cement concrete based on site related data. (e) The frames and leg assemblies of the array structures shall be made of MS hot dip galvanized. Minium thickness of galvanisation should be at least 80 microns. (f) All fasteners shall be of Stainless steel-SS 310 / HDG, Nut & Bolts supporting structures including modules mounting structures shall have to be adequately protected against all climatic condition. (g) Design efficiency report generated by Staadpro shall be submitted. (h) All RCC members will be designed in accordance with IS 456:2000 & detailing will be as per IS13920

b) GRID TIED INVERTER : Should be any of the other make if simultaneously approved by MNRE/SECI/NICE. The make of invertor proposed by the contractor shall got vetted by the designed vetting agency. The department reserve the right of making independent enquiries with MNRE/SECI/NICE as regard approval of the purposed make. In case of any adverse obseravtion/reservation from any one of the agency the make shall not be allowed. NOTE:- The contractor shall be responsible for following formalities and obtaining all permissions and process necessary documentation with electricity board to put system ON grid:- (a) Registration incuding registration fee and and applicable taxes for both HT and LT grid connections. (b) Discom connectivity Feasibility. (c) KSEB Ltd. Plan Approval & Obtaining Charging Pernission for Rooftop System. (d)KSEB Ltd. P (Meter and Protectin) Inspection. (e) Completion of Plant from Electrical Inspector of KSEB Ltd. P or any other apropriate authority (f) Commissioning and connectivity from KSEB Ltd. P or appropriate authority The contractor shall also carry liaison with local electricity board authority tor any competent authority for any other formalities required for roof top SPV pant which not mentioned in the CA. (h) Expenses toward the above mentioned formalities or any other formalities shall be borne by the Bidder/Contractor.

c) COMBINER BOXES & ELECTRICAL PANEL IF NOT INCLUDED AS PART OF INVERTER ;- The junction boxes shall be of dust, vermin and waterproof and shall made of thermo plastic. The teminal shall be connected to copper bus bar arrangement of proper sizes. The junction boxes should have suitable cable entry points fitted with cable glands of appropriate size for both incoming and outgoing cables. Suitable marking will be provided on the bus bar for easy identification and cable ferrules shall be fitted at the cable terminals points for identification, Combine groups of modules into independent charging sub arrays that shall be wired to the controller, Should meet IP 65 standard for outdoor application, There should adequate on of inputs DC string cable with suiatable Fuse, MCB and SPD & chamber(Bus Bar) in DCDB, Output AC DB with suitable MCB/MCCB with SPD and NVR arrangement as per discom requirements.

d) CABLES & WIRES AS REQUIRED ( From solar moudle to combiner boxes, inverter, existing LT pannel etc Conductor material) : annealed tinned flexible copper conductor, Max PV System voltage(D : C) : 1800 V, Ambient temperature range: -40 Deg C to +90 Deg C, Max Conductor temperature at termination of short circuit : 250 Deg C, Type of conductor : As per class 5 according to EN 60228/IEC 60228, Insulation material : Chemically cross linked XLPE, Type of insulation: According IEC 60502-1, EN-50363-1, Nominal thickness of insulation : 0.80mm, Outer sheath Material: Chemically cross linked XLPE, Recommended bending radius : 4 times of overall dia, AC test voltage : 6.5 KV for 5 Minute, all cables shall conform to BIS standars (IS 694)/(IS1554), PVC/XLPE copper conductor power electric cable. It should consist of followings (i) Cable for inter connection of PV module to junction Box

(ii) Cable for inter combiner box to inverter (iii) Cable from inverter to LT Pannel, primary side. (b) Cable accessories; Glands, lugs, MC4 connectors, wye connectors, clamps, cable ties, perforated trays with accrssories etc all as per site requirement. (c) Gen set elect supply system also designed for standby elect provision in specific builings.

e) LIGHTING PROTECTION ;- There shall be the required number of early streamer emission (ESE) lighting arrestors installed in the array field. The air terminal is early streamer emission(ESE) type which shall be fixed at the top of a GI elevation pole with base so as be at least 2 meter above the structure to be protected (i) Its heights above ground level would be dependent on the level of protection and the protection radial required, The air terminal should be working on the principal of early streamers emission using non radioactive technology , needing no external power source, the air terminal should be capable of tracking the lighting stroke 60 micro seconds earlier as compare to passive lighting rod, the air terminal is of stainless steel and it has qualified diameter to resist high valves of lighting currents, ground connection pipe should be capable of withstand in lighting strikes having dimension 50mm inner dia and 60mm outer dia, the terminal adopter having inner dia 60mm.

f) EARTHING PROTECTION- earthing for solar power plant shall be provided as per IS 3043-2018 ans IS 732-2019 . Each array structure of the PV yard shoud be grounded properly. The array structures shall be connected to earth pits as per IS Standards :- (a) Copper bonded steel rod: material : copper & stainless steel spec : IS 2309 Length :10 ft , Dia : 5/8 or 3/4 " (b) Ground enhancement material zerolite: Matel: carbon fiber, absorbant polymer & Minerals Moisture contoller Specification : IS 2309, Weight: 20Kg/Bag, Resistivity : Max 0.1 OHM-M, Flexural strength : Min 20 KGF/CM2, Monpressive strength : Min 200KGF/CM2,3. earth Rod clamp Matl : SS Copper, Part : Min.2 OR Max 3 Parts.

g) METERING ARRANGEMENTS: Suitable dual metering/net metering arrangement with recording facility shall be provided. The metering arrangements must have features to measure and record:- (i) Parameters of current generation, Voltage, current, PF and energy. (ii) Total energy generated by the system since installation (iii) Energy being consumed in house/bulding for meeting the electrical loads. (iv) Energy being drawn from grid for meeting the electricals (loads) energy being fed to the grid (v) Any other metering required to determine efficiency and efficacy of the system.

h)Remote performance Monitoring system (a) Invertor data monitoring. (b) Necessary Internet connectivity or SIM Card for communication will be provided by us. (c) Providing SCADA system for complete power plant system at main power house building for all three plants with all suitable IT equipments i.e. computer , Keyboard,mouse,printer etc

j) Solar Power Generation Meters , Bi-directional Meters and CTs with all accesoris: As required as per discom standard specification and necessary testing as per discom requirement including necessary testing charges in your scope

k) BALANCE OF SYSTEM(BOS) ITEMS/COMPONENTS :- The BOS items/components of the SPV power plants system deployed under this projects must confirm to the latest edition of IEC or equivalent BIS Standared/MNRE specifications /as specified at Para 2.1 of MINIMAL TECHNICAL REQUIREMENTS /STANDAREDS FOR SPV SYSTEM/PLANTS TO BE DEPLOYED DURING this FY under the programmes of Ministry of New and Renewable energy available on MNRE website.

m ) AUTHORISED TESTING LABORATORIES /CENTRES ;- Test certificate /reports for the BOS items/components can be taken from any of the NABL/IEC Accredited Testing Laboratories of MNRE approved test centres. The list of MNRE approved test centres may be reviewed and updated from time to time. The list as appicable as on last date of bid submission shall be treated as applicable for this tender/bid.

n) WARRANTY: The mechnical structures, electricals works including power conditioning unit /inverters/charge controllers/distribution boards/digital meters/switchgear/storage batteries, etc and overall workman ship of the SPV power plants systems must be warranted against any manufacturing/design/installation defects for a minimum periods of 5 years.

o) Safety equipments:- Foam type Fire Extinguisher suitable capacity installed in every building near inverter pannel

p) GENERALS NOTES : The items of work mentioned in this schedule shall be executed as per following:- The above items shall be quoted and executed on ground based on performace Guarantee basis. The performance Guarantee is related to achieving the 100 KW power generations with specified efficiency and efficacies. The contractor shall also be responsible for desired operational efficacy and desired efficiency of the system during its life cycle of minium 15 Yrs.

The plan layout & schematic diagram shall be got vetted from any one of the following agencies (Approved agencies) (i) National institute of Solar energy (ii) Sardar Swarn singh National Institute of renewable energy (iii) Solar energy corporation of India (iv) The Indian renewable energy development agency. The vetting agency shall also be approve the make proposed by the contractor in his plan layout & schematic diagram.

(i) The successful contractor shall submit the following documents duly vetted by any one approved agency with four weeks of placements of work order for approval of Accepting Officer :- (a) Design calculation: The tenderer should work out design based on the conditions prevalent at DHQ-11 CG Land Chicolna, Goa calculations using PVSYS & PVSOL software or any other software shall be submitted for approval of Accepting Officer. (b) Plan depicting layout of all equipment and Sub Systems of the PV system. This shall be self contained and self explanatory representation of layout of equipment and sub systems. The dimensioned drawing of the site of work clearly marked with all subsystems components etc shall be submitted. (c) Schematic diagram of the electrical system. This shall contain specification, size, current, voltage and fault levels rating of all cables, switch gears and instrumentation & control systems and all metering and interlocking etc.

(ii) All the documents/technical details mentioned above duly vetted as specified above shall be approved by Accepting Officer. The Accepting Officer may approve the documents as submitted by the Contractor or may suggest modification

(iii) Alteration in documents /technical specifications duly supported with reasons for the same. The work shall be executed based on the approved doucments. In case of any dispute the matter shall be referred to accepting officer. The decision of accepting officer shall be final and binding.

(iv) The drawings and other techincal details submitted by the successful contractor, alongwith all calculations, drawing, technical write ups etc shall become departmental property. Department may use these subsequently as deemed necessary. The contractor shall have no claim on these documents and their subsequents use by the department.

(v) After completion the contractor must engage a third party MNRE aproved consultant for final testing and third party inspection of executed work. The consultant shall certify that the work has been executed in accordance with vetted and plan layout & schematic diagram, The contractor shall propose a panel of three consultant for this purpose. The final decision on the consultant to be engaged shall be taken by Accepting Officer. All cost and charges for engagement of consultant shall be born by the contractor.

(vi) After execution of project the contractor will verify generation of electricity as per vetted design in the PVSYST & PVSOL report submitted. The contractor shall ensure suitable arrangements for solar PV Panels.

(vii) Department will give completion of the work to the contractor only on the basis of completion report submitted by the third party consulatnt engaged by the contractor.

Jatan Constructions Private Limited

PPJOHN

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd

Mecone Construction Contractors

SOOD ASSOCIATES PVT LTD

Kurian And Varghese

Agarwal Jagdish Construction Company Pvt. Ltd.

RDS PROJECT LTD

S.S.NATARAJAN AND CO

Kool home builders