Construction of Toilet at Elementary School in District of Sheikhpura

Construction of Toilet for Girls & Boys

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift upto 1.5 including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m. All Kinds of soil.

Supplying and Filling below Grade beam with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing 100 A one brick flat solling joints filled with local sand including cost of watering, taxes royality all complete as per building specification and direction of E/I.

Providing and laying in pcc of 1:4:8 ( 1 cement : 4 coarse sand :8 Gradeed stone aggregate 20 mm nominal size ) excluding cost of centring and shuttering- all complete as per building specification and direction of E/I.

Providing and laying in pcc of 1:2:4 ( 1 cement : 2 coarse sand :4 Gradeed stone aggregate 20 mm nominal size ) excluding cost of centring and shuttering- all complete as per building specification and direction of E/I.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Providing and laying in Rcc of 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 Gradeed stone aggregate 20 mm nominal size ) excluding cost of centring and shuttering- all complete as per building specification and direction of E/I.

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Half brick masonry with bricks of class designation 100A in superstructure upto floor V level for every four floors or part there of.

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer MS tube (medium) 40mm nominal bore

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V

6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) with neat cement punning & White washing with lime to give an ever shade

Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete

Providing and fixing 1 mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3 mm M S gusset plates at the junction and corners all necessary fitting complete including applying a priming coat of approved steel primer as per building specification and direction of E/I.

12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand)

12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand) with neat cement punning

6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.

Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

White washing with lime to give an ever shade New work (three or more coats)

Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement Primer with Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Providing Two or more coats with synthetic enamel paint on Steel over an under coat of suitable shade of approved brand and manufacture

Centring and shuttering including strutting , Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts.

Centring and shuttering including strutting , Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls and level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

Construction of Septic Tank

Coarse Sand

Local Sand

Stone Chips

Cement

Steel

Bricks

Cement

Bricks

Coarse Sand

Local Sand

Stone Chips

Time of Completion- 01 Months

SOR Ref No.

Construction of Toilet for Girls & Boys

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift upto 1.5 including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m. All Kinds of soil.

Supplying and Filling below Grade beam with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing 100 A one brick flat solling joints filled with local sand including cost of watering, taxes royality all complete as per building specification and direction of E/I.

Providing and laying in pcc of 1:4:8 ( 1 cement : 4 coarse sand :8 Gradeed stone aggregate 20 mm nominal size ) excluding cost of centring and shuttering- all complete as per building specification and direction of E/I.

Providing and laying in pcc of 1:2:4 ( 1 cement : 2 coarse sand :4 Gradeed stone aggregate 20 mm nominal size ) excluding cost of centring and shuttering- all complete as per building specification and direction of E/I.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Providing and laying in Rcc of 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 Gradeed stone aggregate 20 mm nominal size ) excluding cost of centring and shuttering- all complete as per building specification and direction of E/I.

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Half brick masonry with bricks of class designation 100A in superstructure upto floor V level for every four floors or part there of.

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer MS tube (medium) 40mm nominal bore

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V

6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) with neat cement punning & White washing with lime to give an ever shade

Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete

Providing and fixing 1 mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3 mm M S gusset plates at the junction and corners all necessary fitting complete including applying a priming coat of approved steel primer as per building specification and direction of E/I.

12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand)

12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand) with neat cement punning

6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.

Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

White washing with lime to give an ever shade New work (three or more coats)

Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement Primer with Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Providing Two or more coats with synthetic enamel paint on Steel over an under coat of suitable shade of approved brand and manufacture

Centring and shuttering including strutting , Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts.

Centring and shuttering including strutting , Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls and level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

Construction of Septic Tank

Coarse Sand

Local Sand

Stone Chips

Cement

Steel

Bricks

Cement

Bricks

Coarse Sand

Local Sand

Stone Chips