Loading…
Loading…
Tender Value
₹8.4 L
EMD Value
₹21,500
Closing Date
24 Nov 2025, 9:30 pmClosed
Rural Development and Panchayat Raj Department
Renovation of Taluka Panchyat meeting hall at Sedam town in Sedam Taluka under 2515-00-101-0-29 for the year 2025-26.
RDPR/2025-26/BD/WORK_INDENT20637
RDPR/2025-26/BD/WORK_INDENT20637
Open
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Kalaburgi
₹500
₹21,500
15 Nov 2025
15 Nov 2025
24 Nov 2025
Renovation of Taluka Panchyat meeting hall at Sedam town in Sedam Taluka under 2515-00-101-0-29 for the year 2025-26.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ m2 (both s...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m2 over and including priming coat of exterior primer applied @ 2.20 kg/10 m2) with paint of...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Fixing of door frame in an existing opening including embedding frame in
floor and walls after cutting masonry for holdfasts for embedding holdfast
in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 80mm wide top rail and stiles 100mm wide as per dr...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and Applying PU based Elastomeric Liquid Applied PU
Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing, fabricating and fixing of 10 mm thick Decorative Grooved
Bamboo Wood Wall cladding with panel size 1220mmx2440mm, thermal insulation value 2.2 J/g oC & having density 1300kg/m3. The base ma...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25m...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operatio...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe32 mm dia with all lead, lifts, loading & unloading charges, cost and conveyance ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectivelywith all lead, lifts, loading & unloading charge...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments incident...
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. with all lead, lifts, loading & unloading charges, cost and conveyan...
Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class with all lead, lifts, loading & unloa...
Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Classwith all lead, lifts...
Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge with all lead, lifts, loading & unloading charges, cost and conveyance of all mate...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. includi...
Providing and fixing plain rolled glass 4mm thick with teakwood beading of 10mm thick.with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments incide...
Providing and Supplying DURIAN High-end OfficeFurniture Set of Executive Table, Pedestal, Wooden Shelf / Cabinetwith all lead, lifts, loading & unloading charges, cost and conveyance of all materials...
Providing and Supplying ASAINYKCRAFT Low-back Chair With Fixed armrest with CushionBackrest Height (Low-back range: 200 - 400 mm, Mid-back range: 400 - 700 mm)Low-backLumbar Support available in Seat...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe......mmdia..........mm thick confirming toIS2509 with suitable size bends, metal/PVCJunction boxes, adhesive paste etc., and running bef...
Wiring for lighting/power circuit using one of FRLSPVC insulated 1100V grade, multistr and copper wire with low conductor resistance single core in openor concealed system of wiring with specified IS6...
Wiring for lighting/power circuit using one of FRLSPVC insulated 1100V grade, multistr and copper wire with low conductor resistance single core in openor concealed system of wiring with specified IS6...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate with required nos. of machine screws, bolts nuts etc., complete on the existing me...
Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switchwith all lead, lifts, loading & unloading charges, cost and ...
Supplying capacitor type ceiling fan complete with downrod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearin...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying andfixing 5A. ceiling rose, necessary leng...
Supplying exhaust fan of 1440 RPMof 300mm(12") sizewithbracket blades complete for light duty suitable tooperateon230V50Hz, AC Supply.with all lead, lifts, loading & unloading charges, cost and convey...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and5A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. with all lead, lifts, loadin...
Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceilingc lamps, LED of Power/COB...
Supplying & fixing retrofit type-PL-LED Lamp ......WLED linear source with CCT 6500 degreeK, CRI 70%.efficacy 80 lumen perW, life 25000 burning hours and Compliance to IS 10322/IEC60598, LM79 &LM80. T...
Fixing all types and all capacities of fluorescent /falseceiling/ spot light /CFL /LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, requiredNo...
Supplying and fixing regular MCB distribution boards on wall/board/ flush mounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacityMCB's single phase/3phase/si...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .