MISC REPAIR TO OTM BLDG/ROOF TREATMENT, MES INSTALLATION AND OVER HEAD RESERVOIR 4.75 L.G CAPACITY AT AF STN HIGHGROUND

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5sqm each and removing from site all as specified.

All as per item No 1 above but area exc. 1.50sqm & not exc 4.00 sqm each –ditto-

Taking down shutters of any description having area not exc. 1sqm each and removing from site all as specified.

Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each and removing from site all as specified.

Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each &refixing the same opening after easing & adjusting

Resecuring or easing & adjusting without taking down Sutters of any description exc. 1 sqm each and not exc. 2 sqm.

S&F 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates including necessary fixing lugs,hinges lock, strike plate etc.

S&F 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates including necessary fixing lugs,hinges lock, strike plate etc.

S&F factory made solid PVC single door frames of size 50 x 47mm made out of 5mm plain colour PVC Sheets reinforeced with MS Square tubbing in opening as per specification.

Supply & fixing rolled mild steel angle iron chowkats including hold fasts and tie rod complete all as specified & directed.

Supply and fixing 35mm thick 2nd class hard wood plane framed panneled shutter (two panel) with pannels of 9mm BWP /12mm veneered particle board with commercial veneered on both faces as specified & directed. de tapering from 10mm to 5mm around the panel on one side fitted to chowkats. The size of rail and style as per IS 1003 (Part-1)Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35mm thick glazed and Skelton shutter of 2nd class hardwood (Hollock) open rebated and prepared to receive glass,gauge etc.divided into squares with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in SSR Part-1 clause 8.20(a) all as specified.

M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2 panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Prelaminated particle board 18-19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S&F steel window or ventilator, fixed type, with glazing bars complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 1 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Supply & Fixing 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge

Supply & Fixing in repairs 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staple

All as per item no.21 but fixed in repairs including replacement of damaged wooden bedding with and encluding two coat of synthetic enamel paint over a coat of pink primer all as specified.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with wooden beads having area not exc, 0.50sqm in each pane all as specified.

Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out old glazing pins/spring clips of any area

S&F mild steel butt hinges cold rolled medium weight of 100mm size all as specified.ISI Marked.

All as per item NO. 25 but 75 mm size

Supply and fixing double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified

Supply and fixing in repairs double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified

S&F Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws (Size of hasp and staple in 100mm)

S & F, aluminium handles, cast type anodised, 125mm size

S & F, aluminium handles, cast type anodised, 125mm size as in repair

S & F, aluminium anodised barrel tower bolts of extruded section, 150mm

S & F aluminium anodised barrel tower bolts of extruded section, 150mm as in repair

S & F 250 mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of with bright bolt of extruded sections or cast aluminium alloy, complete all as specified.

S & F in repair 250 mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of with bright bolt of extruded sections or cast aluminium alloy, complete all as specified.

S & F Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) including necessary form work complete all as specified and directed

Preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and labour for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

S&F aluminium anodized frame for door, windows, ventilators, partition walls of section 100mmx44mmx1.62mm with one or more rebates including joining cleats for fixing necessary lugs frame work complete all as specified and directed by Engr-in-Charge.

M&L for anodised aluminium door shutters single/double leaf, side hung type, with top rail of size 44.45X101.60X1.60mm thick, bottom & lock rail 44.45X101.60X1.60mm thick styles/meeting styles shall be of size 85X44.45X1.60mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 150mm long 2 nos to ach shutter complete all as specified.(Prelaminated board and glass to be measured & paid separately).

Supply and fixing aluminium anodised window.ventilator shutters, side hung type without sash bars, aluminium secton of size 83.85mm x 44.45mmx1.6mm thick including necessary jointing cleats glazing clips, rubber packing aluminium anodised snap beading, screw, aluminium beadings such as peg stay 150mm long-01 No, Aluminium handle size 100mm -01 No hinges type B-21, 100mm long (2 Nos) on each shutter to be fitted with glass panes etc complete all as specified and as directed. (Note :- Glass panes to be measured & paid separately.

S&F anodised aluminium grills,7.5mm wide ,6mm thick fixed to aluminium windows/partitions/door frames including all fixing arrangements like aluminium channels, screws etc complete all as specified & directed by Engr-in-charge.

S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs Door closer hydraulically regulated, designation No. 2, universal type, aluminium bady (Die Cast) suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repiars

Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins arches pillars all as specified.

M&L for brick work sub class “B” bricks straight or curveted in plan exc. 6mtr mean radius with old size bricks Iin CM 1:6 all as specified.

All as per item No 50 above but except bricks all as specified.

Taking down cement plasterincluding racking out joints hacking for key scrubbing down with water all as specified.

M&L for rendering 15mm thick in cement mortar 1:6 as on brick walls finished the surface even & smooth without using extra cement all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 as on brick walls finished the surface fair & even without using extra cement all as specified.

Preparation of new wall surfaces plastered or unplastered and applying three coats of white, complete all as specified and directed.

Demolition of cement concrete as in ground floors and in paving not exc 15cm thick below or above ground level all as specified.

M&L for PCC 1:5:10 type E-2 as in sub base & in foundation concrete all as specified .

M & L for cement conc type C-1 1:3:6 (40mm graded aggregate) 50mm thick as in plinth protection finished even and smooth w/o using extra cement.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar

Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.

M & L for Vitrified ceramic Light shade tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm th screed in CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300x450 x 7mm thick as in vertical surface and joint s grouted & pointed flush in white cement with pigment and including 10 mm thick screed bed in CM 1:3 of vertical surface on glazed tiles complete all as specified and directed.

S&F non skid coloured ceramic jointless tiles 7 to 8 mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in CM 1:6 complete all as specified and directed.

M/L machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed in CM(1:4) complete all as specified and directed.

M/L Kota Stone Slab 20-25 mm thick in riser of steps , skirting , dado and pillar laid over cement screed and jointed over and including 15mm thick screed in cm (1:4) complete all as specified and directed.

Material and labour for 25mm thk PCC 1:2:4 type B-0 Using 12.50mm graded crushed stone aggregate , finished rough complete all as specified and directed.

Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) and removal to a distance exceeding 100 metre, complete all as specified

Dismantaling brick tiles or terracing tiles single layer in roof complete.

Taking down existing water proofing treatment and chesling the existing bituminou coating and rubbish off the premises to a distance exeeding 150 mtr and n. exc 250 mtr all as specified

Roughning the surface cleaning and washing down with water to remove dust etc

Material & labour cutting out cracks to V section in existing RCC roof slab or terracing, cleaning out wetting grouting with cement and sand slurry in cement mortar (1:3), complete all as specified.

Material & labour plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in,roof kerb ,padding to roof to maintain the required slope and finished the surface even and smooth, without using extra cement, complete all as specified.

Material & labour cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified.

Material and labour, 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement, after applying neat cement slurry @ 3Kg/Sqm, including wire brushing, cleaning, washing and preparing roof surface, complete all as specified and directed. Note : WPC shall be measured and paid separately

Supply only Integral waterproofing compound

Cleanig the new or old plastered concretre surfaces and applying a coat of primer @ 0.30 litre/ Sq. m and applying a layer of APP based polymeric membrane 3mm thick weighing not less than 3.60 Kg/ Sq.m reinforced with non wovenpolyester with 100 mm side lap and 150mm end over with LPG torch flwme application, complete all as specified and directed.

Material & labour, 40 mm thick brick tiles laid on roof and including 15 mm thick screed bed in CM (1:6) and jointed grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and complete all as specified and directed.

All as per item No 77 above but except brick tiles.

S/F PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, 110mm double socketed complete all as specified and directed.

S/F PVC (SWR) bend 110 mm complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessoriesr

Dismantling wall and ceiling boards (fibre pulm, insulation etc )or insulation board/slabs/blanket, any thickness including cover fillets

S&F False ceiling board at all heights of 600 mmx600 mm x16 mm mineral fibre ceiling tiles of type classic lite RH-99 fine texture of 'Amstrong' laid on exposed grid system .

Taking up or down steel water tubing and connection including cleaning for refixing or remocal to stone of 15mm bore all as specified.

Taking up or down steel water tubing and connection including cleaning for refixing or remocal to stone of 20mm bore all as specified.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.

M&L for G1 tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade all as specified.

S&F in repair100mm dia ‘P’ or ‘S’ trap.

S & F in repair cast iron 100mm bore sand cast soil waste or vent pipe as in any length with or w/o ears with cement joints fixed to wall and laid in floor in complete.

S & F in repair cast iron 75mm bore sand cast soil waste or vent pipe as in any length with or w/o ears with cement joints fixed to wall and laid in floor in complete.

S & F in repair cast iron floor trap 75mm, incl 125mm dia CP grating incl jointing to waste pipe, fixed in cement concrete 1:2:4 complete.

S&F PVC connections 600mm long including back nuts and washers fixed to 15 mm bore of pipe fixed in repairs.

S&F in repair coloured vitreous china ware WHB of size 450x400 with chromium plated waste coupling of 32mm bore, PVC waste pipe.

S&F in repair water closet (Pedestal pattern) coloured including connection to drain (out going pipe) and to flushing pipe anti syphonage pipe etc seat cover and all joints, making good to the floor all as specified.make:-Parryware cera

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) as in fixed in repair

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.as in fixed in repair

Supply and fixed in repairs vitreous china squatting pan Orissa pattern of size 550x400mm including integral foot rest fixed in position complete all as specified.

S&F PVC valveless, syphonic action type, flushing cistern,10 ltr capacity low level white with inlet ball valve, float handle and connection complete all as specified in repair.

S&F 15mm bore bib taps brass cast copper alloy (CP) with crutch or butterfly handles, screwed down, screwed for iron pipes or for brass ferrules and fixed in repairs.

S&F pillar tap cast copper alloy CP 15 mm ,screwed down high pressure for iron pipe fixed in repairs complete all as specified and as directed by Engineer-in-Charge

S&F Stop valves, cast copper alloy, screwed down, high pressure,with crutch or butterfly andle,screwed both ends for iron pipe or for unions and fixed In repair

S & F in repair stainless steel sink, 1.00mm thick for kitchen, with waste coupling, PVC waste pipe, washers, including, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm

S&F PVC kitchen waste coupling/waste pipe with rubber warsar of design and pattern suit to existing waste couplings with and including 32mm PVC waste pipe heavy duty as in repair

S&F, grating doom 100mm dia of PTMT (minimum weight 25 gms).as in repair

S&F Waste coupling of PTMT 32 mm (half or full threaded) (Minimum weight 32mm-45gms as in repair

S&F Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) (S & F Bore dia of pipe 15mm) fixed in repair

S&F, fixed 15 mm bore, bib taps, tandard of PTMT any colour high pressure screwed for iron pipe, (minimum weight 90 gms). as in repair

S&F, fixed 15mm bore, stop valves, of PTMT any colour high pressure screwed for iron pipe, (minimum weight 90 gms). as in repair

Dismantling PVC water storage tank of capacity exceeding 250 litre but not exceeding 500 litre , complete all as specified and directed.

S&F Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed.

M&L for 20 TO 25 mm thick rendering in cement 1:3 on faces of concrete surface(edges of chajjas, roof, roof projectios and similar items) in two layers with finished surface even and smooth w/o using extra cement with and incl taking down broken surfaces of concrete and applying two coats of existing finishes and shade.( Double scaf folding and necessasry shuttering deems to be included in the rate)

Material and labour for repair of edges of jambs cills and soffits of door window and other opening of width exc 5 cm and not exc 10 cm each side by taking down cement plaster and plastering the same with cement mortar 1:4 and make good with 2 coats of existing finishes complete all as specified and directed by engineer-in-charge

M&L for preparation of old decorated plastered surfaces of walls by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) complete all as specified and directed by Engineer-in-charge. Make

M&L for preparation of plastered or un-plastered old decorated surfaces of ceiling, cornices etc such as brooming down or steel wire brushing, scraping down smoke shoots, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white lime wash on ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or un-plastered old decorated surfaces of walls, cornices etc such as brooming down or steel wire brushing, scraping down smoke shoots, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint on wall complete all as specified and directed by Engineer-in-charge.

M & L for Preparation of old wooden surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated plastered /unplaster surfaces of by rubbing down and applying one coat of exterior grade acrylic emulsion alkali proof ( Ist quality)over thin layer of wall care putty all as specified and as directed by Engineer-in-charge.

Taking down & refixing steel gate of any design or section Height up to 7 mtr & refixing the same to same opening after minor addition & alteration with and incl repair and providing 4 no heavy duty wheel and pintal hinges (box type heavy duty),with welding work and greashing tp make it functional

Taking down rolling shutters carry out minor repair including bearing, shaft etc and greaceing n exc 3.5 mtr height and refixing in the same opening , complete all as specified and directed.

Supply and fixing rolling shutter spring as per requirment nexc 3.5 mtr height , complete all as specified and directed.

Taking down rolling shutters minor repair and greaceing exc 3.5 mtr height , Gear type and refixing in the same opening, complete all as specified and directed.

Supply and fixing rolling shutter spring as per requirment size, exc 3.5 mtr height , complete all as specified and directed.

S&F in repair Ball brass valves, high pressure,of PTMT of size 15mm with polythene float and epoxy coated Aluminium rod complete, screwed for GI pipe and fixed all complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for

Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings and mid support pillars complete all as specified and directed by Engr In Charge

M & l for PCC 1:2:4 type B0 using 12.5mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F in repair Ball brass valves, high pressure,of PTMT of size 20mm with polythene float and epoxy coated Aluminium rod complete, screwed for GI pipe and fixed all complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

M & L for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc inclusing taking down old one. Complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc.fixed with L or J type hooks complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm joint free as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc laid over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. joint of the tiles should be filled with tile grouter complete all as speciied and directed by Engr In charge

M&L for 20 TO 25 mm thick rendering in cement 1:3 on faces of concrete surface(edges of Column/beams ,chajjas, roof, roof projectios, celing and similar items) in two layers with finished surface even and smooth w/o using extra cement with and incl taking down broken surfaces of concrete ( Double scaf folding and necessasry shuttering deems to be included in the rate up to height of 15M OHT)

M&L for preparation of new plastered or un-plastered surfaces of walls,Column/beam faces and applying two coat of cement base paint on wall over priming plastered and other surfaces complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or un-plastered old decorated surfaces of walls, cornices etc such as brooming down or steel wire brushing, scraping down smoke shoots, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of cement base paint on wall complete all as specified and directed by Engineer-in-charge.

M & l for run lead joints for 250mm dia bore CI pipe and fittings complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:6 as on brick walls finished the surface even & smooth w/o using extra cement all as specified.

M & L for preparing newly plastered surfaces and applying three coats of coats of white wash on ceilings.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including 15mm thick rendering in CM 1:6 complete all as specified and directed..

Note:- Amount of credit of Rs.34770.00 for retrieved materials is mentioned in Schedule of Credit Page No 110 of tender documents in pdf form which will be deducted offline while acceptance of tender.

B N FRIENDS AND CO