85163/E8

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XII are under Ser No. 2.00 to 13.00 are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for SITE CLEARANCE as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for ROADS /FOOTPATH /CULVERTS as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for PROTECTIVE WORKS as listed in Schedule ‘A’ Part- VIII

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part- IX

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part- X

Lumpsum price worked out by the tenderer for FENCING AND GATE as listed in Schedule ‘A’ Part- XI

Lumpsum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part- XII

SCHEDULE `A' PART - XIII is not prepriced by MES . Bidders shall insert their rates in Green field under Col-6.

SCHEDULE 'A' PART XIII :- FITTINGS & FIXTURES AND MISCELLANEOUS ITEMS

Fixing only single Phase KWH meters of any size /rating for recording /tracking consumption of servant Qtrs incl making necessary electric connection all as specified and as directed. Note : Single Phase KWH Meters shall be issued under Sch "B" as free for fixing only.

Supply, install, testing & commissioning of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz all as per Ventil Air - DB of Havells or techno-commercially equivalent of other specified makes and connecting up complete including provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose complete all as specified and as directed. Note :- (i) The unit rate quoted shall be deemed to include the cost of making hole in walls/other surfaces, making good the disturbed surfaces including any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan and matching to the existing surface.

Material & Labour for Telephone socket , RJ -11 , 1 M , Cat No. : ACVKRTW111 of Verona of Crabtree ( Havells) or techno-commercially eqivalent of Legrand /Anchor Roma all as directed by Engineer-in-Charge.

Material and Labour for TV socket outlet 1 M complete all as directed by Engineer-in-Charge.

Supply and fix internet socket RJ-45 , suitable for Cat 6 cable , shielded,folded metal , 1 module complete all as directed by Engineer-in-Charge.Make :Havells Crabtree , Cat No. ACVKJWW451 or techno-commercially equivalent in Anchor Roma / Legrand.

Supply and fix TV socket complete all as directed by Engineer-in-Charge.Make :Havells Reo , Cat No. AHEKTOW001 or techno-commercially equivalent in Anchor Roma / Legrand.

Supply and fix 20W (1X4') wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation, with necessary wiring, including all required accessories for light fitting with fixing arrangement all as specified and directed. Make: Philips cat part no. BN021CLED20SPSUCWGRS2 OR or techno-commercially equivalent in WIPRO/Havells

Supply and fix 10W (1X2') wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation, with necessary wiring, including all required accessories for light fitting with fixing arrangement all as specified and directed. Make: Philips cat part no. BN021LED10S-6500PSUGRS1 OR equivelent WIPRO / Havells

Supply and fix decorative wall light fixture made of polycarbonate suitable to fix LED bulb of 15W with B-22 base with necessary wiring complete with all fixing arangement all as specified and directed. Make: Havells Light Fixture cat part no . LHFOECELTZ10014 , Model-Stylo or Tecno -commercial equivalent in WIPRO / Philips

Supply and fix LED lamp 15 W 3 star rated with minimum 1500 lumen output, B22 holder complete all as specified and as directed Make: Havells bulb cat No. LHLDDEEEML8R015 or its equivalent in Philips/Wipro

Supply and fix LED lamp 5 W 3 star rated with minimum 500 lumen output, B22 holder complete all as specified and as directed Make: Havells bulb cat No. LHLDEUEEML8R005 or its equivalent in Philips/Wipro

Supply and fix 30W Energy saving and environmental friendly long life LED Building Security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 rotection and Impact resistance of IK07 with 10KV Built-in Surge Protection Devicecomplete with all fixing arrangement suitable for operating voltage 100 to 270 Volts. Make: Havells cat part no. ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or its equivalent in Philips/WIPRO

Supply and fix on wall with bracket arm made out of GI medium grade tube of 40mm dia,1.5 meter long bend to shape 120 degree and 2 Nos of MS Clamp 25x4mm of required lengh/size with one coat of red oxide & two coat of silver metallic paint complete.

Supply and fix MCB DB TPN 6 way having degree of protection as per IP 43-IK09 with metal door (double door) 415 Volts complete copper bus bar with neutral link with provision for MCB TPN as incomer and MCB TP, SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge Make : L&T cat part No.DBTPE006DD / ABB/SIEMENS/Legrand

Supply and fix MCB DB SPN 8 way having degree of protection as per IP 43-IK09 with metal door (double door) 230 Volts complete copper bus bar with neutral link with provision for MCB SPN as incomer and MCB SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge Make : L&T cat part No.DBSPN008DD / ABB/SIEMENS/Legrand

Supply and fix MCB DB SPN 4 way having degree of protection as per IP 43-IK09 with metal door (double door) 230 Volts complete copper bus bar with neutral link with provision for MCB SPN as incomer and MCB SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge Make : L & T cat part No.DBSPN004DD / ABB/SIEMENS/Legrand

Supply and fix MCCB,DB,TPN, 8 ways, DOUBLE DOOR, IP-43, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Cat No : DBVTL008DD of L&T or techno-commercially equivalent in ABB/SIEMENS/LEGRAND.

Supply and fix MCCB,DB,TPN, 6 ways, DOUBLE DOOR, IP-43, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Cat No : DBVTL006DD of L&T or techno-commercially equivalent in ABB/SIEMENS/LEGRAND.

Supply and fix MCCB 4P (Ics=100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A. Cat No : CM91712OOKOOG of make L&T or techno-commercially equivalent in ABB/SIEMENS/LEGRAND.

Supply and fix MCCB 4P (Ics=100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 to 80 A. Cat No : CM91712OOJOOG of make L&T or techno-commercially equivalent in ABB/SIEMENS/LEGRAND.

Supply and fix MCB,TPN,10KA, 415V, "C" curve, 06 to 32 A, ISI marked complete. Cat No : BB40630C of L&T or techno-commercially equivalent in ABB/SIEMENS/LEGRAND.

Supply and fix MCB, SPN, 10KA, 240V, "C" curve, 06 to 32 A, ISI marked complete. Make : L&T/ABB/SIEMENS/LEGRAND.

Supply and fix MCB, SP, 10KA, 240V, "C" curve, 06 to 32 A, ISI marked complete. Make : L&T/ABB/SIEMENS/LEGRAND.

(c) The meter warranty should be 2 years, service warranty should be 5 years with life time service support. (d) The software should be capable of sending automatically email & SMS of billing information to the users/occupants. (e) The complete work of installation, testing,commissioning & software enabling for bill generation as per the requirement of GE/Engr-in-Charge is to be got executed by the OEM or his authorized channel partner only.

Material & Labour for hot pressed moulded SMC Meter box of thickness 16 SWG and Size 250 (H) x 250 (W) x 155 (D) mm or next higher size with locking arrangement with viewing glass and earth bolt fixed flush to wall & making good the disturbed surfaces for mounting 01 No single phase energy meter including painting/marking of Qtrs No below the meter incl electric connection complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat no GSMB-2525 or techno-commercially equivalent in Hensel/Rittal/OBO.

Construction of Brick masonry valve chamber (230mm thick wall) of 900 x 900 x 900mm internal size, PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation, brick wall with sub class `B’ bricks built in CM 1:6, PCC 1:2:4 type B1 using 20mm graded stone aggregate for coping rendering in CM 1:4 15mm thick including provision of MS sheet cover 3.15mm thick fixed to MS angle frame made out of 40x40x5mm thick with 2 coats of synthetic enamel paint over one coat of red oxide primer to steel surfaces and locking arrangements including necessary excavation and earth work in any type of soil . All as specified and directed.

Supply, install, testing & commissioning of Air release valve, Cast iron, double air outlet, flanged ends, 50 mm connected to 80mm dia main line, ISI marked conforming to IS 14845 including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and as directed. Make: Leader/L&T/Kirloskar

M&L for hot pressed moulded SMC Meter box of thickness 16 SWG and Size 1000 (H) x 690 (W) x 215 (D) mm or next higher size with locking arrangement with viewing glass and earth bolt fixed flush to wall & making good the disturbed surfaces for mounting 01 No MCCB TPN DB & 06 Nos single/three phase energy meters etc. including painting/marking of Qtr No below the meter incl electric connection complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat no GSMB-10069 or techno-commercially equiv in Hensel/Rittal/OBO.

Supply and fix flat submersible cable 3 core multi stranded copper conductor PVC insulated, weather proof, ISI marked of size 6 sqmm for connecting from starter to bore well submersible pump sets complete all as specified and as directed. Make: Havells/Finolex/Polycab

Suppy and fix MCB TPN 40 Amps,415 Volts,10 KA, "C" series all as specified and directed. Make L&T Cat No.BB40400C or techno-commercially equivalent in Siemens/ABB

Suppy and fix MCB TP 20 Amps,415 Volts,10 KA, "C" series all as specified and directed. Make L&T Cat No.BB30400C or techno-commercially equivalent in Siemens/ABB

Supply and fix loop in- loop out junction box,Maintenance free, tamper and rot proof, Fire retardant- Class FV-0 as per IS:11731 Part-II,termite resistant,IP55 with approx internal dimension 200x140x95mm (HxWxD) or next higher size made out of FRP sheet,Cable entry from top-1 No and bottom-2 Nos with weather proof canopy including din rail for mounting Single pole MCB, 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular poles including necessary aluminium clamps, suitable double compression cable glands, lugs and GI nut and bolts complete all as specified and directed by Engr-in-Charge. Make: Sintex, Cat No:GSJB-2014 or techno-commercially equivalent in any Group-I Makes.

Supply and fix, IP 65, Class I, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium 25 W or next higher rating Post Top Lantern with high Power LEDs as light source with CT >= 5700 K integrated type operating range – 140 to 270 V, 50 Hz fixed on pipe of appropriate size/dia complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size from junction box to fitting all as specified and as directed. Make: Havells, Cat No:CORALPT25WLED757PSYMTOPC or techno-commercially equiv in Philips/Jaguar.

Supply,fix and test LED Street light fitting of capacity 60 Watts, 6000 Lumens output IP-66 protection including driver unit suitable for working voltage 140-270 V AC, 50 Hz, pressure die cast aluminium housing and finishing epoxy powder coated grey colour after phospho chromate treatment with all accessories including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 3 Nos including nut and bolts for fixing the bracket on the pole including one coat of primer and two coat of aluminium paint and connecting up complete all as specified and directed by Engr-in-Charge. Make: Havells, Cat No:ENDURAPEARLPLUSSL60WLED757SASYTOPC or techno-commercially equiv in Philips/Jaguar.

Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) complete all as specified & as directed with & incl the following accessories : (MAIN LT PANEL FOR 24 NOS OF ORs QTRS)

BUS-BAR & INTERNAL CONNECTIONS: The bus-bars shall be made up of 04 Nos high grade Aluminium 200 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non- combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exist shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 125 to 160 A-01Nos. Make : L & T, Cat No : CM90642OOMO or techno-commercially equivalent of Legrand/Siemens. OUTGOINGS: (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 to 80 A-03 Nos (2W+1S) Make : L & T, Cat No : CM91712OOJOOG or techno-commercially equivalent of Legrand/Siemens. (b) Time switch 415 Volts, 3 Phase of 20 Amps rating with contactor complete. Make : L&T, Cat No AUTS02AST00 or techno-commercially eqvt of Legrand/Siemens. (c) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps-01 No. Make : L&T/Legrand/Siemens.

Supply and fix angle health faucet cast copper alloy with push button flexible steel pipe with pvc lining of 0.5 meter long suitable for 15mm pipe all as specified and directed

Supply and fix angle cock cast copper alloy chromium plated screwed down concealed type high pressure with fancy type handle screwed for iron pipes of 15mm bore all as specified and directed.

Supply and fix for 15 mm bore brass chrominum plated central hole basin mixer as specified and directed.

Material and Labour for cutting the existing hardstanding/ PCC/WBM road at a depth of not less than 60 cm & 30 cm in width for passing of cables/pipelines through GI pipes, returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with 20 mm graded aggregate upto 20 cm, bottom filled with excavated earth & finishing to a uniform smooth surface complete all as specified and as directed.

Supply and fix for 15mm dia bore copper alloy chromiun plated kitchen sink mixer with regular swinging spout swan necked as specified and directed.

Supply , laying connecting & testing of PVC insulated flexible multi-core round copper conductor cable of size 3 core 1.5 sqmm incl necessary end connector fixed alongwith pole structure etc., with all fixing and connecting accessories like PVC conduits etc., complete all as specified and directed.Cat No. WHMFDSKB31X5 of Make : Havells or techno -commercially equivalent in Polyfab/Finolex.

Rough Excavation over areas by mechanical means ( hydraulic Excavator) n.exc 1.5m deep and getting out of hard dense soil all as directed.

Rough Excavation over areas by mechanical means ( hydraulic Excavator) n.exc 1.5m deep and getting out of soft loose soil all as directed.

United Sales Corporation

Mecone Construction Contractors

Aditi Solar Private Limited

S.S.NATARAJAN AND CO