Work no 07 Meerpur Hindu Loni me bane west plant ke kriyanvyan hetu 2000 kva ke vidut sanyojan ke karya ke liye swikriti ki pratyasha me plant ke antrik HT line va LT line ke vidhutikarn ka karya

Supply & Laying For a 2000 kVA connection, the High Tension (HT) cable requirements depend on the input voltage (typically 11 kV or 33 kV) and local utility regulations. Based on standard industrial practices, a 3 Core x 185 sq. mm XLPE armoured aluminium cable is commonly required for 11 kV systems.Work will do as per engineer incharge.

Supply & laying of 400 Sq mm 3.5 Core L.T Cable aluminium cable For 11 K.V.A. Key LT Cable Full Load Current (LT side) Cable Type: XLPE Insulated, PVC Sheathed, Armoured Aluminium Cable Sizing (Typical Configuration) 3.5 Core x 400 sq. mm XLPE Cable. Work will do as per engineer incharge.

Supply & laying of 240 Sq mm 3.5 Core L.T Cable aluminium cable For 11 K.V.A. Key LT Cable Full Load Current (LT side) Cable Type: XLPE Insulated, PVC Sheathed, Armoured Aluminium Cable Sizing (Typical Configuration) XLPE Cable. Work will do as per engineer incharge.

Supply & Fixing of 2000 Amp load connection Make C.G or Schneider,cropmton, Abb. Voltage Rating: 11 kV (Nominal), 12 kV (Maximum) Rated Current: Typically, 800A is common for 2000 kVA, providing sufficient margin) Short Circuit Breaking Capacity: 13.1 kA to 21 kA for 3 seconds (21 kA is standard for many modern tenders). Making Capacity: 50 kA (peak). Type: Indoor/Outdoor, Sheet steel-clad, floor-mounted, metal-enclosed. Operation: Motor-operated spring charge with manual override (remote trip facility is generally required). Work will do as per engineer incharge.

C.T. For V.C.B Protective Relay & CT Requirements Protection Type: Overcurrent and Earth Fault (O/C & E/F) relays (typically self-powered or 230V AC operated). Current Transformers (CT): Cast resin/epoxy insulated ring type, typically 30/1A, 60/5A or 100/5A, Class 10P10 for protection. Panel Metering: Ammeter (0-60A/5A) and KV meter (0-15KV) with selector switches. Work will do as per engineer incharge.

S/F 11KAV HT Pole SP-55 11mtr long. Work will do as per engineer incharge.

S/F Tee channel. Work will do as per engineer incharge.

S/F Fuse set. Work will do as per engineer incharge.

S/F 11 kv T.P.M.O Complete. Work will do as per engineer incharge.

Earthing Road 11 KVA as per inincharge of enginner direction Supply and burying earth for lighting conductor of 900mm x 900mm x 3mm copper plate vertically with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. Work will do as per engineer incharge.