Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.4 L+₹2.5 L (13.0%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹22.0 L+₹3.0 L (15.9%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹22.3 L+₹3.3 L (17.3%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹22.9 L+₹4.0 L (21.0%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹20.9 L
EMD Value
₹41,800
Closing Date
15 Sept 2021, 5:00 pmClosed
GE Dronachal
GE Dronachal, Dronachal Top, Neori Hills, Bhopal
SPL REPAIR TO ROOF TREATMENT OF ADM BLDG AT DSCC AYODHYA NAGAR BHOPAL
2021_MES_468904_1
8633/E8
Open Tender
Civil Works
Item Rate
180 days
GE Dronachal
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
GE Dronachal
₹41,800
Yes
23 Mar 2022
19 Aug 2021
20 Sept 2021
19 Aug 2021
15 Sept 2021
27 Aug 2021
Amount
Taking down cement plaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down down with water etc complete all as specified. Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote his rates considering the above fect.
Demolition of brick work or stone boulder masonry built in cement mortar complete all as spd and as directed. Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote the rates considering the above fect.
Dismantling of RCC other than ground floors and similar suspended works complete all as specified. Note:- Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote the rates considering the above fect.
Demolition of cement concrte (un- reinforced) above ground floor and paving not exc 15 cm thick complete all as specified. Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote the rates considering the above fect.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed
M&L for brick work with modular size fly ash bricks , straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified.
M&L for rendering 15mm thick CM 1:4 on fair face of brick over concrete surface finished even and smooth witout using extra cement complete all as spd.
M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed on 15mm thick screed in CM 1:4 with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, grinding and polishing complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (20mm graded aggregate ) as in fillets at junctions between roof and parapet walls, copings rounded or chamfered angles, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 25mm dia pipe and Refixing old steel tubing and connections in new or old position as in walls, ceiling, floors, etc.complete all as specified.
Supply and fixing 25 mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors including taking up or downand removal from site complete all as specified.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 40/50mm dia pipe and Refixing old steel tubing and connections in new or old position as in walls, ceiling, floors, etc.complete all as specified.
Supply and fixing 40 mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified.
Supply and fixing 50 mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified.
S & Fixed in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50 mm bore complete all as specified.
S & Fixed in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40 mm bore complete all as specified.
S & Fixed in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore complete all as specified.
M&L in repairs 150 mm dia PVC (SWR) rain water pipe fixed to wall/celing including necessary clamp to be provided and taking down of existing rain water pipe with fittings complete all as specified and directed.
S&F 150 mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
S&F Grating doom cast iron of size 150 mm complete all as specified.
M&L for preparation of newly plastered or unplastered surfaces of wall with sand papering of incl cornices washing, rubbing down surfaces and applying two coats of acrylic emulsion exterior weather proof paint over a primer coat (tint as approved by GE) complete all as specified. Note:- Paint and primer shall be 1st quality of same make.
M&L for Waterproofing of existing terrace by applying Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnaum Product code 5662 OR Berger PU RoofKoat
S&F in Steel work in tubular trusses with medium grade including special shaped washer, required nuts and bolts fixtures etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed
S&f 6mm thick hollow Polycarbonate corrugated roof sheet(ISI marked) fixed with self driving screws with washer roof and joined two sheets will be filled with silicon weather proof sealant and covered with aluminium strip of 50mm x 3mm top and bottom complete all as specified and directed
Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 10cm and not exceeding 15cm long and dia of neck 16 to 20 mm complete all speciified and directed
S & F steel flat iron and including necessary drilling holes bolting or reveting etc and similar works complete conforming to fe-290 Gde E-165. complete all as specified and directed by Engineer-in-Charge.
S&F Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk) forming holes, with bolting, rivetting attachment Fe 410-W(Gde-E- 250)quality-A complete all as specified.
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all speciified and directed
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth. complete all as specified and directed by Engineer-in-Charge.
Vee kay construction
Makewell Enterprises
Samaksh Enterprises
Raja enterprises
Shapers Constructions Limited
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .