PROVN OF SPL REPAIR TO SECURITY WALL,BATHROOM AND INTERNAL WIRING UNDER GE SATWARI

Amount

Demolition of PCC in ground floor & pavings not exc 15 cm thickness below or above ground level etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including complete cement mortar bedding, terrazo dado from wall surface removing serviceable tiles to store and rubbish off the premises.

Demolition of brick/stone/boulder masonary work built in cement mortar or cement lime mortar complete including all quoins, arches, pillar etc complete.

Demolition of un- reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of cement concrete (Reinforced) in ground floor & pavings not exc 15 CM thickness below or above ground level ( reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed

Dismantling of wrought iron or mild steel work (angle iron) of any description not other wise provided in any positon complete all as specified.

Dismantling barbed wire of any description or in any positon complete and removing from site complete all as specified.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line or for manholes not exc 10 Sqm on plan in any type of soil and getting out complete all as specified and directed.

M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in sooft/loose soil all as specified and directed

Returning, filling in (any type of soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete and all as specified and as directed

Removal of excavated (soil) to a distancen.exce 50m and and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete, but except brick, i.e. using serviceable bricks obtained from ' here-in-before all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete, but except brick, i.e. using serviceable bricks obtained from ' here-in-before all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 4) etc complete.

M&L Cement concrete in foundations, Type-D2, 1:4:8 ( 40 mm thick graded aggregate) filling and mass concrete as in foundation complete all as specified.

M & L Cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in Surface channel/PCC drain etc complete all as specified and as directed

Material and labour for rendering 15mm thick in CM (1:4) on brick surfaces or concrete surfaces finished even and smooth w/o using extra cement etc complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on brick surfaces or concrete surfaces finished even and smooth w/o using extra cement etc complete all as specified and as directed

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately

M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately

Material and labour for rendering 5mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for Reinforcement concrete M-25 (Design Mix) (20 mm graded aggregates) as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete.

M&L for Reinforcement cement concrete M-25 (Design Mix) (20 mm graded aggregates) as in beams, cantileveres, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M&L Reinforcement cement concrete M-25 (Design mix ) as in column complete all as specified and as directed.

M&L for form work to side of rough finished concrete surfaces as in foundations, footing, base of column, side of foundation and plinth beam and similar work vertical or to batter fair finished flat surfaces complete all as specified and as directed.

M&L for form work to side pillars, post, strust, pier, columns and similar works squar or rectangular rough finished and flat concrete surfaces complete all as specified and as directed.

M&L for formwork fo rough finish flat surfaces of concrete to sides & soffits of floor & roof beam , lintel, in floors or roofs, landings, balconies and shelves etc for flat surfaces.

S & F for angle iron post and strusts/double swan neck horn on security wall including securing bolt, including cutting top, drilled, welding fixing as required confirming to FE-290 Gde-E-165

Pain Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course,string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneels, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified.

M&L non skid joint free ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 etc complete.

M&L for 25 mm thick PCC (1:2:4) type B-O (Using 12.50mm graded stone aggregate) as in floor etc complete.

Material and labour 75mm thick PCC 1:2:4 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

M&L precast cement concrete type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and sey in CM(1:4) etc complete.

M&L TMT steel bars 10 mm dia and over in reinforcement , cut to length, bend to as required including cranking, bending an binding with annealed wire not less than 0.9 mm dia complete all as specified and as directed.

M&L TMT steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders in reinforcement , cut to length, bend to as required including cranking, bending an binding with annealed wire not less than 0.9 mm dia complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L for chequered cement concrete tiles with white cement and pigment 20 cmx 20 cmx25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors andand laid over & incl 15 mm thick cement screed bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified

M&L three coat of white wash on ceiling including preparation of new plastered ceiling surface and complete all as specified

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

Removal of complete existing water proofing treatment of any description on roof ( including Brick/PCC tiles) surfaces of any description including roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items, root up the small trees/vegetation etc and brushing neat cement slurry @ 3kg/sqm etc complete all as specified and as directed

Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction.

M&L applying water proofing treatment with the following (a) First coat of bitumen primer conforming to IS-3384 @ 0.5Kg / sqm to the prepared surface, till the surface is properly impregnated and the solvent oil in primer shall be allowed to evaporate completely. (b) Second APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application complete all as specified

M&L for preparation of newly surface of APP membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc complete all as specified and as directed.

S&F in repair vitreous china WC Europian pattern size 555x360x400mm, snow white with S trap (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe and incl seat cover etc complete including making good to floor complete all as specified & as directed. Make: Cera Cat Part No S1051108 & B1510101 or equivalent in jaquar,essco,kohlar

S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with PVC (SWR) P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. Make:- Cera Cat Part No Clovin S3010106 or equivalent in jaquar,essco,kohlar.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.. Make :- Cera, Cat No- S2040119 or equivalent in jaquar,essco,kohlar.

S & F in repair 10 ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long and PVC connection 450mm long complete all as specified and as directed Make :- Cera Cat Part No B1010107 or equivalent in jaquar,essco,kohlar.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed.

S&F in repair 15mm bore cast copper alloy chromium plated angle cock with long shank & cup concealed type complete all as specified and as directed.

S&F 15mm bore cast copper alloy chromium plated bib cock two way with wall flange complete all as specified and as directed Make:- ESSCO Cat part No SQT-512ANKN or equivalent in jaquar,cera,kohlar.

S&F in repair 15mm bore fancy type chromium plate bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed.

S&F in repair fancy type health foucet (ABS Body) with 1 mtr long easy flex tube in chrome finish & wall hook Make :- ESSCO Cat Part No ALE-ESS-585 or equivalent in jaquar,cera,kohlar.

S&F in repair fancy type soap dish chromium plated complete all as specified and directed.

S&F in repairs grating 102mm without waste hole Make: Prayag cat Part No FT-03 or equivalent in jaquar,cera,kohlar.

S&F in repairs grating 102mm with waste hole Make Prayag cat Part No FT-04 or equivalent in jaquar,cera,kohlar.

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

S&F low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm 32mm bore etc complete all as specified & as directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & as directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and directed.

S & F 1000 litre capacity of rotational moulded polyethylene water storage tank 2 layered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete.

Taking up or down 15mm dia bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed .

Taking up or down 20mm dia bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed .

Supply and fixing galvanised 15mm dia bore mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Supply and fixing galvanised 20 mm dia bore mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

S&F in repair PVC (SWR) pipes type 'B' single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F in repair PVC (SWR) pipes type 'B' single socketed, 75 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F in repair PVC (SWR) type 'B' bends any radius, 110 mm dia complete all as specified. Make -Astral,Supreme, Finolex

S&F in repair PVC (SWR) type 'B' bends any radius, 75mm dia complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F PVC (SWR) type 'B' junction single, (Single T) equal or unequal, 75 mm bore complete all as specified.

Material & labour factory made steel ventilator top hungd double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required. Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No. CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one coat of coal tar on the ends of steel frame in contact with brick/concrete surface. (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames. (iii) PCC block for embedding lugs.

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 etc complete all as specified and as directed

S&F in repair Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F in repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

Supplying & fixing 30 mm thick Rajshri Brand Factory made solid Panel Prelam PVC internal door shutter consisting of frame made out of MS tube of 19 guage thickness & size of 40x20 mm for stiles, top,lock & bottem Rails MS frame shall have a coat of steel primers of approved make & manufacture MS frame shall be covered with 5 mm thick prelam heat moulded PVC C channel of size 30x100 mm forming stiles and 5 mm thick prelam 125 mm wide pvc sheet for top rail lock rail & botte rail on either side of pannel and 15 mm thick 20 mm wide cross PVC sheet as gap insert for top & bottem Rail. Panelling of 10 mm prelam pvc sheet to be fitted in th ms frame welded/sealed to the stiles & rails with 30 mm wide x 5 mm thick Prelam PVC sheet bedding on either side and additional 30 mm wide PVC bedding as gap insert below top and bottem rail jointed together using solvent cement adhesive . An additional 5 mm thick prelam PVC strip of 20 mm width is to be stuck on the interior side of the C channel using PVC solvent cement adhesive etc. complete as per direction of Eng In Charge, manufacture's specification.

S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed (ISI Marked)

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed. (ISI Marked)

S&F aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed. (ISI Marked)

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and as directed. (ISI Marked)

Supply only 3mm thick, figured glass, pin headed type in square in n exc 0.5 sq.m in each pane etc fixed with oil putty etc complete all as specified and as directed.

Supply only stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified.

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat alkali resistant priming paint etc complete all as specified and as directed

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing complete all as specified and as directed.

M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with grey cement and pigments etc complete .

S&F Concertina coil 450mm dia complete all as specified and as directed.

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down of unsv MCB DB SPN /TPN along with MCB's

M&L for complete point wiring for One light/fan/bell point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised flush boxes of suitable size including white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.

Description all as per Srl item No 99 here in before butOne 3 pin socket outlet 6 amp independent

Description all as per Srl item No 99 here in before but One 3 pin socket outlet 6 amp same board

Description all as per Srl item No 99 here in before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

M&L modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

M&L modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

M&L modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

M&L modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

M&L modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.

S & F Modular Bell Push with indicator Polycarbonate material ISI marked 1 Module , 6 Amps, 240 V

S & F musical door bell, AC 230 volt single phase.

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing LED tubelight fitting 18-20 W LED, 230V, Batten type complete in all respect . Cat part No DMLN1LT8-16 of Crompton or equivalent Wipro , Havells alongwith LED tubeRod with heat dissipation capability suitable for G-13 base tubelights base fluorescent T8/T12 luminaire , 20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Cat Part No LTT8-20 of Crompton or equivalent in Wipro , Havells.Note:- The LED batten and LED tube rod shall be of same make.

S & F complete energy saving new generation 10W LED IP65 bulk head luminary with opal diffuser complete all as specified and directed .make: Crompton Cat part LBHP-10-CDL or equivelant in Havells ,Wipro

S & F of lamp holder,PVC /Polycarbonate type with back plate for batten fitting .

S & F LED lamp suitable for B22 holder of capacity 7 Watt.

S&F Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing .

S&F Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing all as specified and directed.

MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.Make:- IndoAsian Optipro Cat Part No 811151 or equivalent in Havells/ Seimens/C & S Electric

MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series,ISI Marked complete all as specified and directed.Make:- IndoAsian Optipro or equivalent in Havells/ Seimens/C & S Electric

S&F sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Taking down and Refixing of ceiling Fan ,dismantling blades and depositing Fan and blades in safe custody of user or MES store yard of AGE E/M.

Supply only single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and directed.

Supply and fixing Exhaust fan 300 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900/950 rpm complete with louvers for wall mounting incl grouting and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of holein wall of required size for fixing of the exhaust fan complete all as specified and directed .

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

M/S RAJ ENGINEERS

THAKUR BUILDERS AND CO

M/S shakti steel industries

M/S Gouri Constructions

M/S VIJAY KUMAR SHARMA

M/S PARAMJEET SINGH