PROVISION OF 06 AIR CONDITIONERS FOR CCTV MONITORING STATION AND PROVISION OF SECURITY SEARCH LIGHTS FOR WATCH TOWER AND GARDEN LIGHT AT CGSD (MBI), PANVEL AND PROVISION OF 03 NOS HIGHMAST LIGHTS AT OTM COMPLEX AGARDANDA FOR ICGS MURUD JANJIRA.

Amount

Supply, install, testing and commissioning of split type air conditioner 2 TR capacity of inverter technology 5 star BEE rating with cordless remote control,single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height, intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed. Make:- Voltas / LLoyd / Daikin/Hitachi. Note:- (i) AC's to be installed at various heights and locations at G+6 building as per user requirement. (ii) All ACs to be installed by authorised OEM Rep only

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3800 VA suitable for 2 Ton AC. Make- Sinetrac / Vinitec / ITE G or equivalent.

S & F White cover modular plate 2M suitable to fix 2M socket complete all as specified and directed

S & F White cover modular plate 1M suitable to fix 1M switch complete all as specified and directed

S & F PVC Flush Box for Modular socket 2M on wall with drilling etc complete all as per the direction of Engr-in-Charge.

S & F PVC Flush Box for Modular switch 1M on wall with drilling etc complete all as per the direction of Engr-in-Charge

S & F Mini Modular MCB 25A SP,1M, Modular type fixed in switch board, ISI marked, flush type, multipurpose complete all as specified and directed.

S & F modular socket 25 Amps ,Heavy Duty 2/3 pin combined 2 module ISI marked, flush type, complete all as specified and directed.

Material and labour for submain wiring along with earth wire using 2x 4.0 sq mm (colour coading) + 1x 4 sq mm earth wire (green colour) of single core PVC insulated multistrand copper conductor 1100 Volts grade FRLSH type in and including PVC casing capping of suitable size (isi marked) with all accessories such as bend, junction boxes, short pipes of suitable size complete all as specified. Note: Three run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one unit.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SP and current carrying capacity 25 AMP, in the MCB Complete with connection testing and commissioning

Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition.

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 10 sqmm, 3 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Make:- Havells/polycab/KEI/Finolex

Supply and fix in repairs MCB distribution board TPN 4 way 415 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCCB TPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate complete all as specified and as directed. Make :- Standard/ Legrand/Schneider/Havells/Siemens

Supply and fixing Four Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, Ics=Icu, O/L & S/C protection, thermal magnetic release type complete all as directed.

M&L for point wiring complete using proper colour code 1.5 sqmm, PVC insulated, FRLSH type, single core, unsheathed, multistranded copper conductor cable, ISI marked, 1100 volts grade conforming to IS 694, Part-II with latest amendments up to date drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/ceiling/beams/column etc. and providing GI metal boxes 1.6 mm thick with flush mounting and modular cover plate with modular frame suitable for mounting modular switches, sockets, regulators etc. and fixing with necessary screws, washers including 1.5 Sqmm PVC insulated FRLSH type, single core, unsheathed, multistranded copper conductor cable, ISI marked, 1100 volts grade green in colour as continuous earth wire connected to common earth dolly complete all as specified and directed for following:-

One light point / fan point controlled by one switch.

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item No.2 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

Supply & fixing modular type switch 6 Amps ,1way,1 module.

Supply & fixing modular type switch 16 Amps ,1way,1 module .

Supply & fixing modular type socket 6 Amps, 2/3 Pin 2 module .

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin 2 module.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing ceiling fans complete with remote unit, blades, down rods and electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DP Complete with connection testing and commissioning

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 16 AMP, in the MCB SP Complete with connection testing and commissioning

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 20 AMP, in the MCB SP Complete with connection testing and commissioning

Supply and fix 0.75 mtr warm light system 20 to 30 Watts Filament wound fiber poles(GFRP) manufactured using sophisticated multi axes Siemens controlled CNC filament winding machines using E Class Fibers having Glass content of 65 to 70 percent. Top OD min 90 mm and Bottom OD min 90 mm, throughout thickness of 5 mm with overall tolerance for length +/- 25 mm. and tolerance for overall thickness +/- 0.5 mm. Pole should be shockproof Poles to be finished on the outside with UV inhibitors in accordance with ASTM G 154, Izod Impact Strength of 80 k/Jm2, Barcol Hardness of 45 BHU, Tensile Modulus of 9000 MPa, Surface Resistivity of 1.6*1016 Ω, Volume Resistivity of 4.05*1013 Ω cm, Tensile Modulus of Elasticity 22918 N/mm2, all as per ANSI 136.20 & BS EN 40-2-2004. Wind Speed sustainability to be 150 KMPH, Flammability test which confirms to V0 rating of UL 94. Pole to have transparent Resin and Adhesive during the winding process. Base Plate in GFRP material. TUV Certification, Batch wise Test report, LOGO incorporation as per user incl foundation with nuts bolts all as per OEM and all necessary accessories to make the functional complete all as directed. Cat No CTRF-.075-90 of re-En Source (Helipole) or equivalent as pe CA.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 AMP, in the MCB DP Complete with connection testing and commissioning

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SP and current carrying capacity 16 AMP, in the MCB SP Complete with connection testing and commissioning

Supply and fix in repairs MCB distribution board SPN 2 way 240 volts, single door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate complete all as specified and as directed. Make :- Standard/ Legrand/Schneider/Havells/Siemens

Supply and fix FRP looping box of size 230x170x105mm with connector and comprising of suitable space to fix Four nos of SP MCBs, ISI marked,240V complete with and including providing GI clamps, nuts bolts etc suitable for fixing on PCC pole/ wall complete all as specified and directed. Make: - National/Sintex

Supply and fix in repairs MCB distribution board SPN 6 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate complete all as specified and as directed. Make :- Standard/ Legrand/Schneider/Havells/Siemens

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 6 sqmm, 2 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Make:- Havells/polycab/KEI/Finolex/Fort Gloster/Asian cables (RPG)

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 10 sqmm, 2 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Make:- Havells/polycab/KEI/Finolex/Fort Gloster/Asian cables (RPG)

S & F 50W Revolving 360 Degrees LED Search Light for Watch Tower with remote control with ABS material and with a cool White Colour, operating range upto 700 Meters and its base should be provided with a suitable structure to fix at any where with proper nuts and bolts and also it should be provided a cable of suitable range complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter in depth for foundation of pole laying of cable etc and getting out complete all as specified and directed.

Returning filling in of soft/ loose soil , including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer complete all as specified and directed

Removing excavated materials not exceeding 0.50 meter and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as per directions of engr-in-charge.

Material and Labour for for PCC 1:3:6, type C2 (40 mm graded stone aggregate) as in foundations / making good of disturbed surfaces / filling mass concrete complete all as specified and directed

Cutting of existing bituminous surface/PCC hard standing by using mechanical method of any type for laying of cables/GI protection pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed Note:-PCC for making good shall be measured and paid separately)

S&F DWC Pipe 40 mm dia laid in trenches for protection of u/g cable all as per directed by E-In-Charge.

Material and labour for GI pipe 40 mm dia "light grade " complete with all fittings laid in trenches,road/culvert crossing,on wall, floors,on roof,on pole, for cable protection and including removing old unserviceable item complete all as specified and directed. Make :- Jindal/Tata/BST

Supply, installation,testing & commissioning of powder coated double door, compartmentalised cubical LV outdoor panel fabricated out of 3.15 mm thick CRCA sheet steel weather proof, vermin proof, tappered canopy and suitable gasket for stappage of rainwater suitable for 415 Volts, 50 Hz, phase, 4 wire AC supply complete with gland plates, lifting hooks, ventilating louvers, bus bars, interconnection, earthing, labeling electrical interlocking suitable for termination of cables including, supply and fixing of following switch gear and accssories in the panel, complete as required. The panel should be manufactured by the manufacturer, who is manufacturing CPRI approved panel and having Protection IP-65. INCOMER (I) MCCB 100 Amps, 3 phase, 440 Volts, 4 pole, 25 KA complete in all respect - 01 Nos (for incoming) BUSBARS : Electrolyte copper busbar PVC colour sleeved 150 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB & Green sleeves- 01 Set OUTGOING:- (i) MCCB 4 pole, 415 Volts, 63 Amps rating capacity with rapturing capacity 25 KA with variable O/C, S/C & E&F release -01 No (ii) MCCB 4 pole, 415 Volts, 40 Amps rating capacity with rapturing capacity 25 KA with variable O/C, S/C & E&F release -04 No (iii) LED type phase indicator set with controlling fuses for RYB - 01 set of 03 pices only. (iv) Digital multimeter with inbuilt Ammeter, voltmeter and phase current voltage indication, RYV lamp set -01 Nos.(v) Mounted on angle iron 45 X 45 X5 mm (vi) Aluminium Bus Bar 150 Amps NOTE:- (a) The constructional & general arrangement of drawings showing the size of panel, details of quantity & make of materials with technical particulars/ specification, necessary certification from above manufacture shall be submitted by the contractor for approval of accepting officer. (b) Any civil work involved in installation of panel board including making canopy for raincover deemed to be included in item rate.

Supply and Fix High Mast light control panel outdoor type made out of CRCA Sheet 3.0 mm thick factory fabricated, duly powder coated, dust and vermin proof with front and back door openable having pressure locking arrangement control wiring for meeting for metering equipment shall be with 1.5 sqmm and interconnected between switch gears of 6sqmm copper conductor, incl foundation and angle iron of size 35 X 35 X 4 suitable to include the following accessories. (i) MCCB TPN, 415V 40 A, 25 kA (Incoming) (ii) MCB TPN, 415V 32 A, C series (Out going) (ii) Timer Switch (Auto Switching device operating on real time) 415V 3 phase of 20A rating with contactor fitted inside. (iii) Air breaker contactor AC 415V, 50Hz, 3 phase 32A with operating coil voltage-01 No (iv) Toggle switch 5A 230V for auto/manual operation-01 Nos (v) Voltmeter / Ammeter digital type 415v (vi) LED indication lamp set of three.

Design, Supply, fix, installation, testing at site and comissioning 20 metre high mast suitable for 180 KM/hr wind speed and having two point suspension system with stainless steel wire rope of 316/304 of 7/19 construction suitable for mounting maximum 06 Nos of 200/210 Watt LED flood lights symmetrically fitted consisting of the following : Make of Mast : Crompton Greaves / Surya / C&S / Philips / Havells.

(a) Hot dip galvanised (internally and externally) Mast 20 meter high having top diameter 150mm and bottom diameter 410mm continuously tapered, in two sections, polygon shape made out of high tensile steel plates S 355 grade as per BS-EN 10 025 having only one longitudinal weld and no circumferential weld joint for each section, bottom section made of 4mm thick sheet and top section made of 3mm thick sheet, both sections jointed at site by slip stress fit method with min overlap.

(b) Hot dip galvanised Base plate having dia 570mm made out of 25mm thick galvanised high tensile steel plates S 355 grade as per BS-EN 10 025, drilled holes for and including 8 Nos 30mm dia 850mm long TS 600 type foundation bolts.

(c) Luminaires carriage 710mm internal dia, made out of Hot Dip galvanised 50mm ERW class 'B' MS pipe galvanised, 6 arm two sections having welded flanges and jointed at site by means of steel bolts etc, suitable for maximum 06 luminaires including holes for cable crossing and cast aluminium weather proof junction box for cable connections

(d) Winch for raising and lowering of luminaires with carriage having safe working load 750 kg, double drum having oil bath type self lubricating worm gear, with two continuous steel wire ropes 7/19 construction 6mm dia, AISI 316 grade having breaking cap 2350 Kg, operated with single speed three phase electric motor of appropriate capacity and manually by means of handle in case motor is faulty or failure of electric supply, complete with ratchet, limit switches etc as per standard engineering practice to avoid falling of carrirer during raising or lowering.

(e) Single trailing cable 1100 volts grade with flexible copper conductor EPR insulated PCP sheathed min 4.00 Sqmm, 10 core suitable for 06 luminares or independent electric connection for each luminaire all as required and directed.

(f) Weather proof hinged opening with locking arrangement at bottom of the mast for installation of winch and electric panel as per manufacturer recommendations.

(g) Provision of PCC/RCC foundation including design as per manufacturer's recommendations suitable for 20 metres high mast with accessories as detailed in respective item and casting at site including necessary earth work as required for foundation complete all as directed by the Engineer in charge. (Note : High mast shall be installed under guidance of Company's engineer. Flood Light fittings shall be measured and paid separately)

supply and fix LED double lens Flood light of 200/210 Watt IP 65 fitted on High mast 20 mtr height complete all as specified and directed.

Supply and fixing single pointed air termination aluminium rod 12 mm dia 600 mm long including nuts & bolts for fixing air termination rod to pole/ pipe duly insulated by providing appropriate insulator all as required at site.

Supply and fixing LED aviation light 6 Watt single doom suitable to work on 230 Volts including fixing arrangement on high mast light all as directed by Engr-in-Charge Make - Surya / Havells /CG /Bajaj

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 50 sqmm,3.5 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Note for item No 49 & 50 :- (i) Excavation & Earth work,sand cushioning, cable cover and protection pipe shall be measured and paid separately. (ii) Make for item No 49 & 50 :- Havells/polycab/KEI/Finolex/Fort Gloster/Asian cables (RPG) (iii) Quoted rates will inculde finding the cable routes and end connections of cables in case of multiple cables at a place.

All as per item No. 49 above but of size 35 sqmm, 3.5 core

Material and labour for GI pipe 80 mm dia"light grade " complete with all fittings laid in trenches,road/culvert crossing,on wall, floors,on roof,on pole, for cable protection complete all as specified and directed. Make :- Jindal/Tata/BST

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Cutting of existing bituminous surface/PCC hard standing by using mechanical method of any type for laying of cables/GI protection pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed Note:-PCC for making good shall be measured and paid separately)

Material and Labour for for PCC 1:3:6, type C2 (40 mm graded stone aggregate) as in foundations / making good of disturbed surfaces / filling mass concrete complete all as specified and directed.

Supply and fix 40 mm internal dia DWC pipe for cable protection in underground complete with all accessories complete all as per specified and as directed by Engineer-in-Charge.

Supply and fix 63 mm internal dia DWC pipe for cable protection in underground complete with all accessories complete all as per specified and as directed by Engineer-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6.3 mm thick buried directly in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32x6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore eight grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value, complete all as specified and directed.

Supply and fix aluminum strip 25x3.15 mm as roof conductor or down conductor or along the pole/pipe complete with saddles/ insulators made out of porcelain or fibere and fixing screws all as required at site or directed.

M/s PIONEER CONTRACTORS (BID ID -3428273)

Sagar Electricals (BID ID -3421230)

Radha Engineering Services (BID ID -3428087)

industrial suppliers (BID ID -3428172)

R K TYAGIS (BID ID -3421629)