For Outer Electrification Work of Kazim Garden Colony Village Lisari, Bajot Road, Meerut Under Deposit Scheme C/o Mohd Amit Iqbal S/o Mohd Anwar Iqbal in the Area of EUDD-IV, Meerut, Under EUDC, Meerut.

Amount

Cartage of following material from store center Meerut to JE store including loading and unloading at both end.

Cartage of STP pole 11 Mtr. Long.

Cartage of PCC pole 8.5 Mtr. Long.

Cartage of line materail as 11 KV XLPE cable 3x70, joint kit, LT XLPE cable 3.5x70 sqmm. Cross arm, MS channel, MS angle, GI wire, earthing rod, 11 kV pin insulator, 11 KV disc insulator, stay set, ACSR weasel conductor etc.

Cargate of 250 KVA transformers.

Cartage of 11 KV pilfer proof resistant metering cubical with cable termination kit ctr 10/5/A.

Cartage of following material from JE store to site of work on day to day basis including loading and unloading at both end.

Cartage of STP pole 11 Mtr. Long.

Cartage of PCC pole 8.5 Mtr. Long.

Cartage of line materail as 11 KV XLPE cable 3x70, joint kit, LT XLPE cable 3.5x70 sqmm. Cross arm, MS channel, MS angle, GI wire, earthing rod, 11 kV pin insulator, 11 KV disc insulator, stay set, ACSR weasel conductor etc.

Cartage of 250 KVA transformers.

Cartage of 11 KV pilfer proof resistant metering cubical with cable termination kit ctr 10/5/A.

Erection of ST Pole( 11 Mtr. Long) suitable for 11 KV Line, after digging a pit of required size ( In all type of soil) including fixing of all acessories & back filling of the pole with proper ramming after complete of work.

Earthing of ST Pole with earth rod complete

Grouting of poles in CC in ratio 1:4:8 in cement, c. sand and brick ballast.

Erection of PCC Pole (8.5 Mtr. Long) suitable for LT Line, after digging a pit of required size ( In all type of soil) including fixing of all acessories & back filling of the pole with proper ramming after complete of work in all respect.

Earthing of PCC Pole 8.5 Mtr. Long with earth rod.

Grouting of ST poles in CC in ratio 1:4:8 in cement, c. sand and brick ballast.

Erection of Double Pole on ST Pole (11 Meter Long) after digging a pit of required size including fabrication and fixing of Top Channel, Droper Channel and T off Channel

Earthing of STP pole with help of earthing rod.

Grouting of Each pole of Double pole in CC in ratio 1:4:8 in cement, c. sand and brick ballast.

Making a plinth of size 3x2x1.0 m above ground level and 01 fit. Below ground level after digging of earth brick ballast shall be provided and remerging will be done properly after that a retaining wall of 9 width by first class brick in ratio 1:4 of cement and sand will be made. The earth shall be filled upto 1 feet below the top of the plinth after this brick ballast shall be provided upto 6 from the earth level and proper remerging shall be done 1 no. jall of 12 mm shall be fixed in the hollow of plinth and four inches thick RCC in 1:2:4 ratio of cement, sand, stone ballast shall laid on the top of the plinth.

Making a fencing suitable for 250/400 KVA T/F Plinth. Including Providing, Fabrication and Fixing of wire mesh fencing frames of size 3.0x2.0x2.0 mm fabricate out of MS Angle iron of size 35x35x6 sq.mm having 02 No. legs of 15cm long in each frame duly welded and fixing with wire mesh of size 25x25x10 SWG hot dipped galvanized with in the frame pressed under MS flats of size 25x5 mm inside the angle on all four side with help of approx 20 No. bolt and nut of 10 mm diameter 15 cm legs of frame will be grouted in 1:2:4 cement coarse sand and 20 mm gauge stone ballast with paint with one coat of red oxide and two coat of aluminium paint of approved mark after proper cleaning.

Water level earthing of transformers neutral and body by boring of earth, lowering of GI pipe and conneting the Ms earth strip of size 40x4 mm with body and neutral of trasformer

Fabrication and fixing of Fuse Set

Fixing of TPMO.

Installation of 11 KV pilfer proof resistant metering cubical with cable termination kit ctr10/5A with clamp.

Installation of Metering frame.

Fabrication & Fixing of Distribution Box with the help of Box Clamp.

Laying, lifting , sagging and binding of ACSR weasal conductor.

Laying of LT AB Cable off size 3x95+1x70 +1x15

Fixing of 11 KV size of 3x70 sq.mm. cable joint kit.

Sefe Placing of f 250 KVA transformer on newly constructed plinth and making connection / jumpering properly with the help of LT PVC cable 3.50x250 Sqmm (80Mtr.).

Providing & painting Red Oxide.

Providing & Painting Aluminium paint.

Concerting of stay set

Fixing of tailless unit.

Providing & fixing HT Tape for proper insulation

Fixing of stay complete.

Fabrication & Fixing of Gaurding angle 50x50x6

Gaurding of 11 KV line with GI wire and binding of slesh on eqaul distance properly complete work in all respect.

Providing and fixing holding clamps(15)/dead and clamp (15)/joint hook (60)/pearcing clamp (200)/stay clamp/Suspention Clamp (30)/ Box Clamp (50)/PCC pole clamp/STP clamp.

Providing and fixing nut & bolts.

shree sai enterprises

VISHNU TRADING CO.