Construction of Deficient Infrastructure of KLP for Inf Bn at Shahjahanpur Cantt under GE East Bareilly

Amount

SCHEDULE A PART-I (BUILDING WORK)

Construction of education building block (Single story) complete all as specified and as shown of drawing

Construction of store Accn building block (Single story) complete all as specified and as shown on drawing

Construction of garage for 10 Nos Car (Single story) complete all as specified and as shown on drawing

Construction of garage for 13 Nos TK 2.5 ton (Single story) complete all as specified and as shown on drawing

Construction of garage for 06 Nos TK 2.5 ton and 03 Nos water bowser (Single story) complete all as specified and as shown on drawing

Construction of garage for for 02 Nos army bus/7.5 Ton TATA ALS complete all as specified and as shown on drawing

Construction of garage for 01 Nos light Amb (Single story) complete all as specified and as shown on drawing

SCHEDULE A PART II-A (Internal Electrification) for details refer Sch A in pdf folder

SCHEDULE A PART II-B (Internal Electrification)

S&F modular blanking plate on the existing modular plate & switch box excluding modular plate as required complete all as specified and directed.

S&F LED hanging lights fitting 2x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed.

S&F LED lamp 12 watt, 220 volts AC decorative type connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed.

Supply, installation, testing and commissioning of water heater storage type five star rating, electric suitable for single phase, 50 HZ, AC supply, stainless steel inner assembly, 3 KW heating element, twin thermostat for water temperature and safety thermostat stove enamel outer body including minimum 1M of three core 2.5 mm twisted copper conductor, cable PVC sheathed, three pin plug top, polyethylene pipe connection pice 450 mm long of 6 Kg/sqcm two sets of chromium plated adopter at each end suitable for 15 mm bore GI pipe at cold water inlet and coppper tubing connection with chromium plated adopter at ends, at hot water outlet, with safety fusible plug confirming to relevant IS of 25 ltrs capacity complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 415 Volts complete all as specified and as directed.

M&L concealed point wiring using approved colour coding as per IS, with sandard copper conductionr 1.5 sqmm (Nominal area), single core, FRLS, PVC insulated and unsheathed cable, 1100 Volts grade, ISI 694, marked in and including heavy duty, PVC concealed conduit medium grade ISI marked not less than 20 mm dia with all its fittings, PVC junction boxes etc, modular GI metal sunken/ flush boxes of thickness not less than 1.2 mm of any modules from 2 to 18 modules with inner and outer modular cover plates, including FRLS, rigid PVC insulated unsheathed standard copper conduction 1.5 sqmm (Nominal area) single core cable as earth continuity conductior to common earht and connected to earth dolly complete all as specified for the following:- Note:- (i) Cutting/ chasing of wall etc deemed to be including in quoted rate to this item. (ii) Modular GI metal flush/ sunken box alongwith modular base/ front cover plates are inclusive in the item rate quoted. (iii) Only switches, sockets and fan regulator shall be measured and paid separately.

(a) One light point point /bell buzzer/ ceiling fan/Exhaust fan point controlled by one-one way switch

(b) One three pin 5/6 Amp socket on same board with other switches

(c) One three pin 5/6 Amp socket on independent board

All as per item No 3.06 above but one 3 pin socket outlet 15/16 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

All as per item No 3.06 above but One 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size, with earth continuity coductor of size 4 Sq mm.

S&F modular switch 5/6 Amps, single pole, one way 240 volts, 1 module complete all as specified and directed.

S&F modular socket outlet 5pin, 5/6 Amp, flush type 240 volts, 2 module complete all as specified and directed.

S&F modular socket outlet 3 pin, 5/6 Amp and 3 pin, 15/16 Amp (2 in 1 mutlipurpose) 240 volts, 2 module complete all as specified and directed.

S&F Lamp holder (angular/ straight), PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F modular 5 step type Fan step regulator, 120W - 2 module complete all as specified and directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F 125 Amp, 415 volts four pole MCCB adjustable type with breaking capacity 16 kA and including connection, testing and commissioning complete all as specified and directed.

S&F MCB TPN 63 Amps, 415V, 10KA 'C' and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F DB VTPN, 415 volts with 250 Amps rated copper bus bar for double door 8 way IP-54, IK-09 suitable for one MCCB as incoming and MCB TPN as out going mounting flush on wall and making good disturbed surfaces complete all as specified and directed.

S&F DB TPN, 415 volts with 250 Amps rated copper bus bar for double door 4 way IP-54, IK-09 suitable for one MCCB as incoming and MCB TPN as out going mounting flush on wall and making good disturbed surfaces complete all as specified and directed.

S&F DB SPN, 240 volts with 200 Amps rated copper bus bar for double door 12 way IP-43, IK-09 suitable for one MCB SPN as incoming and MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed.

S&F DB SPN, 240 volts with 200 Amps rated copper bus bar for double door 4 way IP-43, IK-09 suitable for one MCB SPN as incoming and MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed.

S&F MCB SP, 5 to 32 Amps, 240 Volts 10 kA 'C' curve conforming to ISI marked complete all as specified and directed.

S&F MCB SPN, 40 to 63 Amps, 240 Volts 10 kA 'C' curve conforming to ISI marked complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

SCHEDULE A PART III ( EXTERNAL WATER SUPPLY) for details refer pdf folder

SCHEDULE A PART IV-A (EXTERNAL ELECTRIFICATION) for details refer pdf folder

SCHEDULE A PART IV-B (EXTERNAL ELECTRIFICATION)

S&F FRP type junction/ looping box of size 280 x 170 x 130 mm top hinged with aluminium busbar of 50 Amp rating for phase and neutral on porcelain based insulator, fixed on pole with the help of MS nuts, bolts and MS clamps - 2 nos of size 40 x 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box, work also includes making suitable hole in pole to take out connections to fitting if required at site complete all as specified and directed.

Dismantling and shifting of elect pole alongwith LT overhead line or security lights of any type, size or capacity complete all as specified and directed.

M&L for supply, installing, testing & commissioning of factory made LT panel outdoor type for LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with bus bar chamber & Aluminium Bus bar of four wire system 415 volt with heat shrinkable insulator sleeve suitable for 315 A for phases and for neutral having openable front and rear shutters with suitable locking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:- (a) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA (INCOMING)=01 Nos (b) Supply and fix 4 Pole MCCB 32 Amp, 50 Hz, 415 V with rupturing capacity 16 KA (OUTGOING) =04 Nos (c) LED based indicator lamp sets comprising of three colours (d) Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Nos (e) Voltmeter 0 - 600 Volts, Digital display, flush mounted 3 phase 4 wire with slector switch - 01 Nos. (f) Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. (g) Complete internal wiring with suitable size of copper wire.

S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

SCHEDULE A PART V (ROAD/ PATH/ CULVERT) for details refer pdf folder

SCHEDULE A PART VI-A (COOLING APPLIANCES) for details refer pdf folder

SCHEDULE A PART VI B (COOLING APPLIANCES)

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 v with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and directed.

SCHEDULE A PART VII-A (SEWAGE DISPOSAL) for details refer pdf folder

SCHEDULE A PART VII-B (SEWAGE DISPOSAL)

RCC Septic tank for 50 users conventional type designed to carry sewage and sludge water excavation in any type of soil, PCC 1:4:8 below foundation,RCC M-30 design mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc complete all as specified and as shown on Drgs No BTD-844 sh1/3 to3/3 complete all as specified and directed.

Soakage wells excavation, in any type of soil,foundation in PCC 1:3:6,walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM,RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size of 3.0 M dia × 4.50 M effective depth complete all as shown on Drg No TD 1/4 to 4/4 complete all as specified and directed.

SCHEDULE A PART VIII (AREA DRAINAGE) for details refer pdf folder

SCHEDULE A PART IX (SECURITY CHAINLINK FENCING) for details refer pdf folder

SCHEDULE A PART X (SITE CLEARANCE) for details refer pdf folder

SCHEDULE A PART XI (INTERNAL WATER SUPPLY) for details refer pdf folder

SCHEDULE A PART XII A (RAIN WATER HARVESTING) for details refer pdf folder

SCHEDULE A PART XII-B (RAIN WATER HARVESTING)

Material and labour for boring/ driling bore well of reqd dia for casing/ strainer pipe, by suitable method, incl collecting samples from different strata, preparing and submitting stratra/ bore log, incl hire & running charges of all equipments, tools, plants & machineries reqd for the job complete all as specified and directionf of Engr-in-Charge, upto 90 meter depth below ground level all types of soil. (a) 300 mm dia

Supplying assembling lowering and fixing in vertical position in bore well uplasticezed PVC slotted/ blind (As shown in drg) pipe medium well screen (RMS) pipes with ribs, incl hire & labour charges, fittings & accessories etc all complete for all depths, as per direction of Engr-in-Charge. (a) 200 mm dia

Material and labour for 100mm thick gravel filling under floor or in foundations including watering and consolidation complete all as specified and directed.

Providing and fixing bail plug/ bottom plug of reqd dia, to the bottom of pipe assembley of tubewell complete all as specified and directed.

S&F 1 HP single phase induction motor speed 1500 rpm/ 300 rpm voltage 220v/110v/230v/240v and frequency 50/60 Hz incl all connection complete all as specified and directed

yash enterprises (BID ID -3241305)

A K BANDHUS (BID ID -3247824)

Sudhir Sharma Associates (BID ID -3239724)

Shikhar ji Enterprises (BID ID -3241126)