REPAIRS TO FENCING GATE BOUNDARY WALL FOOTPATH DRAINS AND SEWAGE LINE INCLUDING OTHER MISC WORKS AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Demolition of brick work built in cement mortar or cement/lime mortar including all arches, quoins, pillars etc. complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work, including taking out embedded portion and making good disturbed ground surface complete all as specified and directed.

Dismantling of asbestos cement/FRP/Galvatume sheets (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base, foundation filling in mass concrete etc. complete all as specified and directed.

M&L for cement concrete, type B1 1:2:4 (using 20 mm graded stone aggregate) as in as surface channel, etc for drain and similar works complete all as specified and directed.

M&L for cement concrete, type B1 1:2:4 (using 20 mm graded stone aggregate) as in benching, coping etc for drain and similar works complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 ( using 40 mm graded stone aggregate) in foundation filling and mass concrete as in boundary pillars and post etc complete all as specified and directed.

M&L for 25mm thick PCC type B-0 1:2:4 ( using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

All as per item No. 13.00 here-in-before but add or deduct for each 25mm girth or part thereof over or under 30cm for forming fair finished drain complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, CM 1:4 complete all as specified and directed.

M&L for stone walling of random or polygonal rubble, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick works or concrete surfaces in CM 1:4 finishing even and smooth without extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 grade with grey cement and pigment including 50mm stone dust layed in floors or paving etc spread, levelled and rammed including watering complete all as specified and directed.

All as per item No. 19.00 here-in-before but for 80mm thickness.

Taking down old paver blocks any shape, size and thickness from the existing surface and refixing at the same place after levelling the ground by using sand for maintaining camber and slope complete all as specified and directed.

M&L for Endura joint free, colour tiles 8 to 10 mm thick (square/rectangular), area of each tiles not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finish in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete paver tiles (reflective type) of size 30cmx30cmx25mm thick of any colour, set, jointed and pointed in neat cement slurry over and including screed bed or bedding layer of mortar 20 mm thick for laying floor finish in CM 1:4 complete all as specified and directed.

Use & waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work exceeding 200m thick (horizontal or sloping) complete all as specified and directed.

S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No. 25.00 here-in-before but for 6mm to 8mm.

M&L for reinforced cement concret (nominal mix), type B-1, 1:2:4 (using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like etc complete all as specified and directed.

S&F of posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire mesh, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riviting etc. and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F of mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long (diameter of neck in 11 to 15 mm) complete all as specified and directed.

Supply only chain link mild steel galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link mild steel galvanised fencing, any size or type including dismantling old unserviceable rusted/broken fencing complete all as specified and directed.

S&F in repairs for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type o fstandard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

Excavation in post holes for hard or dence soil (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

S&F of mild steel hold fast conforming to Fe-290-Gde-E-165 complete all as specified and directed.

S&F of framed work such as grills, gratings, steel gate, purlin etc , with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 gde E-165 complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, scrapping down and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on wall surfaces complete all as specified and directed.

M&L for preparation of new steel surface of any description and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations sid lap fixed with L type or J type or cranked hook bolts complete all as specified and directed.

M&L for cutting holes in brick walls exc. half brick but not exc. one brick walls built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washers, purlins, rafters, posts etc complete all as specified and directed.

S&F of pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with L or J hook 6 to 8mm dia with bitumineous washers etc to protect of seapage and leakage complete all as specified and directed.

All as per item No 42.00 here-in-before but for plain sheeting, in ridges, hips, valley gutters, drip complete all as specified and directed.

M&L for mild steel of 1.60 mm thick, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for 300mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar of 300 mm dia complete all as specified and directed.

S&F in repairs of 110 mm dia, PVC(SWR) pipes double socketed in any length with rubber rings joints laid in fixed to walls/laid in trenches including clamps complete all as specified and directed.

M&L for 50mm thick sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates etc n.exc 2m in length, punched dressed on face and alongwith exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed.

M&L for providing pre-cast cement concrete louvres and jallies, 35mm thick (measured solid), using 1:2:4 type B-0( using 12.5mm graded stone aggregate) including all mouldings but excluding frame complete all as specified and directed.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in pre-cast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area in nexc 100 sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

M&L for providing precast cement concrete kerb stones/apex stones etc in PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) and set in cement mortar 1:4 complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed.

Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in two layers (10mm+5mm) of CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/concrete surfaces as in ceiling complete all as specified and directed.

M&L for one coat of 3mm thick wall care putty on walls/ceiling complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of white cement based putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base acrylic emulsion paint over and including a coat white cement based putty complete all as specified and directed. Note:-1. Using only Exterior Acrylic Emulsion Paint, should be carried out by any of approved company /firm as approved by GE. 2. Putty shall be measured and paid sepreatly.

M&L for preparation of newly plastered surface of ceiling by brooming down and applying three coat of white wash complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 32345.00

M/S VAIBHAV ENTERPRISES (BID ID -3059921)

RAJPATI CONSTRUCTION (BID ID -3061238)

M S MEWALAL UPADHYAY (BID ID -3063673)

MS MOHD RIZWAN KHAN (BID ID -3063541)

M/S RAKESH TRADERS (BID ID -3072480)

SHIV SHANKAR MISHRA (BID ID -3064138)

MODI CORPORATION (BID ID -3063017)