SPECIAL REPAIR TO BLDG NO. P-23 OFFICE COMPLEX, MES IB AND PROVISION OF TECH LIBRARY ROOM AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc and removing debris complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. with raking out joints, hacking for key, scrubbing down with water, etc and removing debris complete all as specified and directed

Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunkenc etc complete all and removing debris complete all as specified and directed

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises and removing debris complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with mixing of liquid WPC finished the surface even & smooth without using extra cement complete all as specified and directed. (Note : Liquid WPC to be mesured and paid separately under appropriate item)

Taking down or complete removal of Mud phuska from roofs, any thickness, including plastering and leeping (where full thickness removed or only a part thereof ) and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. (Note : Liquid WPC to be mesured and paid separately under paaropriate item)

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc., complete as per Manufacturer's specifications

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18sqm but n exc 0.38 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for vitrified light shade floor tiles (scratch free double charged) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for vitrified light shade floor tiles (scratch free double charged) 10mm thick (square/ rectangular) as in skirting /dado etc set & jointed in neat cement slurry and pointed in white or colour cement to match te shade with and including 10 mm thick rendering in cement mortar 1:4 on wall complete all as specified and directed.

S&F for 12 mm thick tuffened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring (Make Sandhoo/Samrat) with two Nos decorative type aluminium handle of 200 mm dia, complete all as specified and directed.

S&F for Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of wateretc., making arrangement for fixing of hardware. EPDM gasket, 1.2+/-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories complete all as specified. Note :- Net Opening will be measured for payment purpose for Area not exceeding 2.00 sqm each

S&F of 4.80mm thick Sheet glass, ordinary quality and glazing with oil putty insquare n exc 0.5 sqm in each complete all as specified and directed

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

S&F for factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F for 100 mm long extruded brass butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F for 150mm long extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F for 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F for in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F in repair vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spredar with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.

S&F in repair PTMT bottle trap (with internal partition 32 mm Size with 300 mm & 190 mm long wall connection pipe and wall flange complete all as specified and directed.

S&F in repairs toilet paper holder CP fixed to wall with chromium plated brass screw complete all as specified and directed.

S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S&F in repairs Pillar tap 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair urinal spreader with CP connection pipe complete all as specified and directed

S&F in repair brass CP health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified and directed

S&F in repair for 15mm bore bib taps brass chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair brass CP angle stop cock/valve of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F in repairs Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Disconnecting existing water tanks, Exc 250 & n exc 500 ltrs setting aside (or lowering if required) and hoisting, reconnecting and re-fixing in same position after cleaning complete all as specified and directed.

Disconnecting existing water tanks, Exc 500 & n exc 1000 ltrs setting aside (or lowering if required) and hoisting, reconnecting and re-fixing in same position after cleaning complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning for refixing complete all as specified and as directed

Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with & including all fittings complete all as specified and as directed

S&F for 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified and directed

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning for refixing complete all as specified and as directed

Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with & including all fittings complete all as specified and as directed

S&F for 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Dismantling asbestos cement/galvalume sheet (corrugated, semi corrugated etc) of any description sheets in roof coverings including ridges complete all as specified and directed.

S&F for 0.50 thick (including coated thickness) pre-colour, pre-profiled (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

S&F for 0.50 thick (including coated thickness) pre-colour, plain type sheet (Galvalume/Zinkalume) any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,used as in ridge fixed with self tapping screws all as per manufacturer/profile maker instruction complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for steel work in tubular trusses, purlins, rafter,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600x 600mm size and 0.30 mm thick (MS galvanized with main tee, cross tee and wall angle grid hanging with 4mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed.

S&F in repair 4 mm thick non asbestos fiber cement building board of 605x605 mm in size (HPSC E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and as directed.

S&F in repair aluminium composite panel sheet 3 mm thick PVCF of brand name GURIND/ALSTRONG fixed with necessary aluminium tube with required silicon & screw as in ceilling/columns and in vertical surface complete all as specified and directed.

S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet includsive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall with scrapping machine tools/electric hand grinder with wire brushes,sand papering and applying two coats of cement base paint over & including one coat of primer with Paint sprayers complete all as specified and directed.

M&L for Preparation of newly or previously untreated steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayers , complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for Preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint on old steel surfaces for grills, guard bars ,shutters etc complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall scrapping machine tools /electric hand grinder with wire brush and applying one coat of oil bound distemper white or tinted complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed.

M&L for applying 1mm thick wall care putty incl Complete removal of existing treatment on old surface of wall and applying two coats of oil bound distamper emulsion complete all as specified and directed

M&L for applying 1mm thick wall care putty incl complete removal old painted or plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces fonished even & smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newaly plastered surface of wall and applying two coats of oil bound distemper over & including 3 mm thick wall care putty complete all as specified and directed.

Preparation of newly plaster surface of wall and applying finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on and including 3 mm thick wall care putty complete all as specified and directed.

M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 9-10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer ie. cement mortar (1:6) complete all as specified and as directed.(Make: Somany (Durastone)/ Kajaria (Duratech)/ Johnson (Endura).

M&L for chequered cement concrete tiles (ultra coloured, vibratory compacted factory made tiles) of 300mm X 300mm X 22 to 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded crushed stone aggregate) as in roof padding, roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.

Cleaning the dust, durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)

M&L for cement concrete tiles 30cmx30cmx20mm thick machine pressed set jointed and pointed in neat cement slurry in floors and cut polished over roof treatment, laid over and including 15mm thick screed bed in cement mortar (1:6) mixed with and including polymer based liquied water proofing additive @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) or as per manufacturers specification and joints of cement concrete tiles shall be filled with cement mortar (1:4) mix with and including 5% curde oil complete all as specified and directed.

S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed to walls or laid in floors including all fittings such as bend, elbow, tee etc., complete all as specified and directed.

S&F in repair 20 mm dia Stainless steel curtain rod conduit type of wall thickness not less than 1mm with both side decorative end bulbs and fixing brakets complete all as specified and specified.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

S&F Aluminum section powder coated anodised aluminium (sliding type) three track windows with sliding shutter and frame series c with aluminum section of size including 4.8mm thick glass and Stainless steel mosquito proffing net as indicated below all as spesified and directed . (i) Frame size 92x29.5x1.2mm (ii) Shutter with section bearing bottom ad top size 40x18x1.250, fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with (iii) Glass 4.8mmmm thick sun control plain glass in panels incl all fitting and fixture complete all as spesified and directed . (iv) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple (v) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (vi) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. .

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

S&F for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for 32 mm thick flush shutters with block board core & plywood face panels commercial type on both face, complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F including fabrication of framed w ork such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed

S&F18mm thick 100% solid PVC prelamiated kitchen cabinet box and shutter, wardrobe of required size comprisig of viorgig PVC resin of K valve 57-60 (suspension Grade), calcium carbonateand natiral fibres and non toxic additives,made from extrusion processhaving minum density not less than 650kg/cbm having good screw holding capacity (screw withdrawal strength of 2000 N (face) & 1100 N (edge) minimun compressive of 50 N/mm2 ,Modulus of elasticity 850 N/mm2 and reistance of spread of fame of class A category with proper of being termite /Borer free, water/ Moisture proof and fire Retardant WPC to be laminated with PVC foil of minimun 14 Microns thick of approved desing pasted on both face of shutter all as per spicifed and directed. Note(quoted rate inclusive of auto closing stainless steel hinges of requisite no per box)

S&F in repair 100 mm hasp & staple sfety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed. Make: Hettich, Cat part No.9113468 or equivalent catpart of SI make as approved by GE.

S&F magnetic catches with steel body ‘H’ type fixed to shutter complete all as specified and directed

S&F for 300mm long Brass barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long Brass handles, fabricated type complete all as specified and directed.

S&F 300mm long, Brass, aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F 4 lever vertical type brass mortise door lock with all accessories complete all as specified and directed.

Preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint with paint sprayers over a coat of pink primer complete all as specified and directed.

M&L for preparation of old treated surface of wall and applying two coats of internal plastic emulsion paint white or tinted on wall with paint sprayers with 1 mm thick wall care putty complete all as specified and directed.

M&L Preparation of old treated surface of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sectionscleat chequered Plates, bolts ,rivets) including distance pieces, cleats etc(Fe 410-W(Gde E-250) quality-A ) etc including dismantling of framed trusses complete all as specified and directed.

M&L for 75mm thick PCC1:4:8 type D2 using 40mm graded stone aggregate as in sub base and finished even and rough for floor finishes etc complete

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, including all fittings and fixtures except floor door closer spring complete all as specified and directed.

M&L for completely removal of old treatment of wall and applying finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on & including 3 mm thk wall putty complete all as specified and directed.

S&F in repair for Maze overhead shower 200 mm round shape single flow (body & face plate SS with chrome finish) with rubit cleaning systemcomplete all as specified and directed. Make :Jaquar Cat part OHS-CHR-1613 or equivalent cat part of make Cera/ Hindware

S&F in repair for concealed body for 3-inlet single lever diverter with button assembly, cartridge sleeve but w/o exposed parts complete all as specified and directed. Make :Jaquar Cat part ALD-CHR-193 oor equivalent cat part of make Cera/ Hindware

S&F in repair for single lever exposed parts kit of HI-FLOW diverter consisting of operating lever cartridge sleeve wall flange (with seals) button assembly sleeve & button (compatible with ALD-079N) including exposed covering of Stainless steel plate complete all as specified and directed. Make :Jaquar Cat part OPP-CHR-15079NKPM or equivalent cat part of make Cera/ Hindware

S&F in repair for SS towel rack 600 mm long without lower hangers but with 3 hooks complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1181FHS or equivalent cat part of make Cera/ Hindware

S&F in repair for corner glass self (with bracket) complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1173 or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chromium plated shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed. Make :Jaquar Cat part SHA-CHR-479L450 or equivalent cat part of make Cera/ Hindware

S&F in repair for vitreous china wash and basin thin rim table top basin of size 415x415x145mm shape round complete all as specified and directed. Make :Jaquar Cat part OPS-WHT-15905 or equivalent cat part of make Cera/ Hindware

S&F in repair for brass waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make :Jaquar Cat part ALD-CHR-705L130 or equivalent cat part of make Cera/ Hindware

S&F in repair for brass CP bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquar Cat part ALD-CHR-769L300X190 or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chromium plated pillar mixer single lever tall boy with 150 mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and directed. Make :Jaquar Cat part OPP-CHR-15005BPM or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chrimium plated angular stop cock with wall flange complete all as specified and directed. Make :Jaquar Cat part OPP-CHR-15053PM or equivalent cat part of make Cera/ Hindware

S&F in repair for soap dispenser with glass bottle complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1135N or equivalent cat part of make Cera/ Hindware

S&F in repair for swivel mirror complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1195N or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chromium plated towel ring complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1195N or equivalent cat part of make Cera/ Hindware

S&F in repair vitreous China white wash down water closet pan 250x585x415mm wall hung including fixing bolts, UF soft close seat cover, hinging device complete all as specified and directed. Make : Jaquar cat part OPS-WHT-15951UF or equivalent cat part of make Cera/ Hindware

S&F in repair for single piece slim concealed cistern with floor mounting frame installation kit and S-type drain pipe conection set for wall hung WC (including flush control plate complete all as specified and directed. Make : Jaquar cat part JCS-WHT-2400FS or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chromium plated two way bib cock with wall flange complete all as specified and directed. Make : Jaquar cat part KUP-CHR-35041PM or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chromium plated hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed. Make : Jaquar cat part ALD-CHR-573 or equivalent cat part of make Cera/ Hindware

S&F in repair for chromium plated toilet paper holder with flap complete all as specified and directed. Make : Jaquor cat part AQN-CHR-7753 or equivalent cat part of make Cera/ Hindware

S&F in repair for brass chromium plated bib cock with wall flange complete all as specified and directed. Make : Jaquor cat part ALI 85037 or equivalent cat part of make Cera/ Hindware

S&F for brass chromium plated single lever sink mixer with swinging spout on upper side (wall mounted model) with connceting legs and wall flanges complete all as specified and directed. Make : Jaquor cat part LYR-38165 or equivalent cat part of make Cera/ Hindware

S&F in repairs of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: Hettich, Cat part No.9190384 or equivalent in godrej etc

S&F repairs of chrome plated stainless steel wire basket (under sink basket) pull out type, size 900 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Cat part 9190451 . or equivalent in godrej etc

S&F repairs of chrome plated stainless steel wire basket Cargo pull out type, size 486 x 550 X200mm with necessary fixing clips etc. complete all as per specified and directed. Make: Hettich, Cat part No.9159552 or equivalent in godrej etc

S&F repairs of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: Hettich, Cat part No.9194314 or equivalent in godrej etc

S&F repairs of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed. Make: Hettich, Cat part 9191711 or equivalent in godrej etc

S&F repairs of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: Hettich, Cat part No.9275311 or equivalent in godrej etc

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel plate rack (Utensil Rack) of size (900mm x 750mmx260mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed.

Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L RCC type B-0 1:2:4 using 12.5mm graded crushed stone aggregate as in kitchen shelves etc including demolation of old slab complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves etc for fair finished surface of concrete, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm, etc for fair finished surface of concrete, complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 18 to 20 mm thick Granite work (table rubbed and polished) in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over & including 15 mm thick screed bed in CM 1:4 in repairs complete all as specified.

M&L for moulding to the ends of granite as in cooking platform complete all as specified

M&L for POP decorative false ceiling including frame work necessary connected items and scaffolding etc complete all as specified and directed.

Excavation over area soft/loose soil n.exc 1.5M wide and n.exc 1.5M in depth, for foundation etc or shafts, wells, cesspits, manholes, pier holes etc getting out etc complete all as specified and directed.

Returning filling in including spreading, levelling, watering & well ramming in layers n.exc 25 Cm in soft/loose soil.

Removing of excavated materials of soils n.exc 50M and depositing where directed at a level n.exc 1.5M above the starting point

M&L for flyash brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for flyash brickwork with subclass `B` bricks, in straight or curved on plan to any radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed

M&L for RCC (M-25 Design Mix) (20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC (M-25 Design Mix) (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete etc., complete all as specified and directed.

S&F Mild steel TMT 6 to 8 mm cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia conformig to Fe 500 as in stirrups, complete all as specified and directed.

M&L for Rendering 10mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finshed the surface even & smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded crushed stone aggregate as in plinth protection, hard standing etc. finished even & fair, complete all as specified and as directed by the Engineer-in-Charge

M&L for 40mm thick PCC type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in leveling course etc complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash etc complete all as specified.

S&F 35 mm Flush shutters, solid construction, with block board core and plywood face panels, commercial type on both side complete all as specified

S&F for steel window with side hung shutters including box type hinges with steel handle and steel peg stay, 100mm tower bolt complete with glazing bars dovetailed or welded made out of z section using flush butt welding and tennon riveting etc including necessary flat iron beading for securing wire gauge etc including holes cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats synthetic enamel paint over a coat of zinc chrome red oxide primer, complete all as specified and directed. Note: sheet glass shall be measured & paid separtely under respective items.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. including bottom of each chowkat to be welded with 01 No 25x25x3mm thick angle iron projecting 10cm on either side & tarring back of chowkats and holdfasts, complete all as specified and fixed.

S&F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and fixed.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified.

S&F in 4mm thick position premium textured finished mineral fibre ceiling tiles of size 600x600mm thick and placed on powder coated GI grid power coated snap grid ceiling 600x600 module constiting of wall angle section 19x19mm and tee section and web height of 38mm and flange 15mm (colour white) (having rotary sticting on all T-section ) with suspension sytem all as approved by GE complete all as specified and directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleatsetc Fe 410W(Gde E-250), quality 'A' complete all as specified.

Taking down carefully point wiring of any type complete for light, fan, socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade , along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conduit with all fixing accessories and making good to match with the existing surface of wall complete all as specified and directed for the following :-

One light/fan/bell point controlled by one switch.

One point for socket outlet 5 amps on independent board.

One point for socket outlet 5 amp same board.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as per Serial item No 173 here in above but for one socket outlet 16 Amp on independent board with 2.5 Sqmm cable and 2.5 Sq mm earth wire complete all as specified and directed

All as per serial item No 173 here in above but for one socket outlet 16 Amp on independent board with 4.0 Sqmm cable and 4.0 Sq mm earth wire complete all as specified and directed

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.

M&L in replacment for two single core (submain) PVC insulated cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty in PVC Conduit concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed for the following:- Note :- (I) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

2x4.0 sq. mm + 1x4.0 sq. mm earth wire.

2x6 sq. mm + 1x6x sq. mm earth wire.

2x10 sq. mm + 1x10x sq. mm earth wire.

S&F in repair ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.

S&F call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.

S&F for modular switch 1 way, 6 amps, 230V AC, 1 module complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F for modular switch flush type 16 amps, 230V AC one way 1 module complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F for modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, 2 module connection complete complete all as specified & directed.

S&F for Modular metal flush box of 1/6 module complete all as specified and dircted.

S&F for Modular metal flush box of 1/4 module complete all as specified and dircted.

S&F for Modular metal flush box of 1/2 module complete all as specified and dircted.

S&F for Modular white plate cover with frame of 6 module complete all as specified and dircted.

S&F for Modular white plate cover with frame of 4 module complete all as specified and dircted.

S&F for Modular white plate cover with frame of 2 module complete all as specified and dircted.

S&F for modular bell push flush type 6 amp, 1 module, 230V AC complete all as specified & directed.

Supply and fix in replacement of A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired of Cat Part No. DHDUCDP0253016-25 Make Havells or equivalant in Anchor / Legrand complete as specified after taking out old unserviceable starter unit all as directed.

Taking down existing old /worn out tube/CFL/bulk head/sketch /fancy /profile light fittings of indoor/outdoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed

Supply and fixing of Flexible led strips with uniform light distribution and long lasting adhesive for perfect cove lighting solution Flexion Neo Led Strip 24 W 3000 K cat part No LHEHDLP5UN1W024 Make :- Havells or equivalent in Philips/Bajaj for ceiling applications as specifed and directed

Supply and fixing of 36 W LED 6500 K 2'x2' Panel Ultra slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications complete all as specified & directed. Cat Part No. 36 W LED 6500 K LHEBAEP7PV1W036 Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified & directed. Cat Part No. 10 W LED 6500 K LHEXACP7IN1W010 Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified & directed. Cat Part No. Cat Part No. LHEXACP7IN1W020 Make :- Havells or equivalent in Philips/Bajaj

S&F LED light fitting 10 Watt bulkhead luminaires in high pressure die cast aluminium housing, lumen out put - 700 Lm, colour Temp - 6500 K having Ingress protection - IP 65 fpr dust, water & IK 08 for external impact including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. make-HAVELLS/WIPRO /Crompton /PHILLIPS

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed

Taking down Old UNSV ceiling /exhaust Fan by disconnecting of all electrical connection and deposit E/M store for desposed off as per policy in vogue complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value Five star rated with brushless direct current motor (BLDC) with remote complete all as specified and directed.

Supply and fixing of exhaust fans PVC body of size 250mm sweep with louvers shutter, voltage 230 50 Hz RPM 1200, copper widing complete all as specified and directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SPN 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection) fixed flush to wall and suitable for universal mounting and including copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB complete all as specified & directed. NOTE:- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SPN 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 8 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE:-(a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TPN 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 16 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB complete all as specified & directed. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fix in replacement of double pole MCB 40-63 amp, 240 v, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity 'C' curve complete all as specified and directed.

Supply and fix in replacment of Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity complete all as specified and directed.

Supply and fix in replacement of MCCB 160 Amp 4 pole 36 KA at 415 V , Adjustable type complete all as specified and directed.

M&L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh GI water pipe 20mm bore medium grade with funnel alternate layer of char coal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.

M&L for Shifting and refixing of split type AC (Indoor and Outdoor units) of any make and any type after servicing and charging of gas (M410a/R134a/R-22/r32) by testing the leakage in system by filling of Nitrogen gas upto 300 PSIG and repairing of leaking spot/joints with gas welding work, cleaning and flushing out the complete system with gas, supply and replacing of drier/filter, making the complete system leak proof, vacuuming the system as existing and testing etc complete all as specified & directed. Note :-(a) Dismantling and refixing of split AC are including in quoted rate. (b)Drier capillary,copper tubing,refrigernt gas,Insulation and LDPE pipe are inclusive in quoted rate.(c) making hole and filling the hole on wall with PCC (1:2:4) type BO (Using 12.5mm graded stone aggregade, 15mm thick rendereing in cement mortar (1:3) good the disturbed surface with existing colour matching are inclusive in quoted rate.

M&L for point wiring with PVC FRLS insulated unsheathed multistranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade , along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium duty in PVC Conduit of 20/25 mm dia , concealed in wall including all conduit and fixing accessories and making good to match with the existing surface of wall complete all as specified and directed for the following :-

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board

One point for socket outlet 5 amp same board

One bell/ buzzer point controlled by one push button on the same board with other switches or independent

All as per same in item No 2 above but for one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 2.5 Sq mm earth wire.

All as per same in item No 2 above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire.

Supply and fixing in replacement of Environmental friendly aesthetically designed ,decorative recess mounted 2W LED spot light for low ceiling height applications as specifed and directed Make ;- Havells cat Part No.LHLDAUSADL8U002 or equivalent in Philips/Bajaj

Supply and fixing in replacement of 15 W LED downlighter Ultra slim decorative aluminium casted recess mounted round fixture in white finish with opal diffuser and separate electronic driver ,suitable for low depth ceiling.of Cat Part No LHEBADP7IZ1W015 Make :-Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of Slim, compact, auminum die cast edge lit panel. Recess mounted square fixture with opal diffuser and separate electronic driver with high brightness LEDs with diffuser to give glare free light of 12 W LED 6500 K LHEBAEP7IZ1W012 Make :- Havells or equivalent in Philips/Bajaj for low ceiling height applications as specifed and directed

Supply and fixing in replacement of Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp E27 base Cat part No. LHFOAKD1TZ1D060 Make :- Havells or equivalent in Philips/Bajaj for home decor applications as specifed and directed

Supply and fixing in replacement of exhaust fans PVC body of size 200 mm sweep including takin g down the old unserviceable one and depositing the same in MES yard for further disposal as per existing procedure.Make : Usha/Havells/Bajaj

Supply and fixing in replacement of Wall mounting fans PVC body of size 400 mm sweep including taking down the old unserviceable one and depositing the same in MES yard for further disposal as per existing procedure.

S&F sheet metal enclosure TPNL MCCB DB 4 way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 with 250 A copper busbar for each phase for DB when MCCB 160/125 Amps (as incomer) to be used, fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires all as directed. Make - Legrand Cat Part No. 5077 45 or Equivalant as Approved by GE. Note:-(a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of hindware ripple 90 auto clean wall mounted chimeny with stainless steel baffle filters, push button control and year warranty on motor all as specified and directed by engineer- in - charge.

Supply and fix electric water heater, storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. as specified and directed.

S&F PVC connection heavy duty with brass union of required length not exceeding 450 mm long with PTMT nuts 15mm bore size complete. Make - Prayag/ Parryware/ Havells

S&F stainless steel angle valve ( Stop valves,) cromium plated with flange screwed for iron pipe of size 15 mm dia (Male thread) complete all as specified and directed. Make - Prayag or equivalent.

Supply and fixing stainless steel Piller tap chromium plated flange screwed for iron pipe of 15 mm dia complete all as specified and directed. Make - Prayag or Equivalent.

Channa Brothers and Co. (BID ID -3129555)

Z N Enterprises (BID ID -3133587)

Perfect Enterprises (BID ID -3137550)

M/s DKS Engineering Works (BID ID -3129089)

R.K.ASSOCIATES (BID ID -3128937)

M/S Amar Enterprises (BID ID -3137498)