CONSTRUCTION OF HAZAT AND GUARD ROOM, BOUNDARY WALL, SANITARY POST, ADVOCATE SHED AND GENERATOR SHED, PORTICO, PCC APPROACH ROAD, ETC. FOR FUNCTIONING OF GRAM NYAYALAYA (PHASE-II) AT JARMUNDI IN DUMKA FOR THE YEAR-2022-2023

Amount

E/W in excavation in foundation trenches in ordinary soil (Vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M including all lifts leveling ramming the foundation trenches removing roots of trees shrubs all complete as per specification and direction of E/I

Extra for E/W in hard soil as per specification and direction of E/I (Vide classification of soil item- B)

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume.)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 75B B/W in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75B B/W in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering- All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing Tor steel reinforcement 8mm dia rods as per approved design and drawing excluding carriage of M.S. bars to work site cutting, bending, and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. (TMT coil Fe 500) (Only valid for SAIL & TATA Steel)

12 mm to 16 mmm

Providing designation 125 mm thick reinforced designation 75A B/W in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5includingthe cost of screening carriage of materials scaffolding raking out joints to 15mm depth curing taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 25mm thick 1st class patent stone flooring (1:2:4) with stone chips in two layers bottom layer 19mm thick (1:2:4) with 12mm to 6mm size graded stone chips and top layers 6mm thick (1:2) with 6mm down stone chips in panels including cost of curing finishing the surface smooth by rubbing with carborandum stone taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

S/F/F 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with block board core blended with high quality phenol formaldehyde synthetic resin both side commercial veneered of standard make with oxidized iron fitting such as hinges sliding door bolts tower bolts handles cleats sand blocks and taxes all complete as per building specification and direction of E/I.

S/F/F M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site hoisting as per building specification and direction of E/I.

Providing and fixing fan hook of 16 mm dia M.S bar 1 Meter long bent to required size and shape, placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building specification and direction of E/I. (Where material is not supplied by deptt.)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marbel / Udaypur green marbel/ Zebra black marbel.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning removing dirt, including scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing rust dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the cod/efficient as indicated in building specification.)

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.

Providing 250 mm wide brick drain in cement mortar (1:6) with av. 150 mm clear depth and 250 mm apron including cost of E/W involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm. dia.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.

S/F/F vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I or R.S. brackets 32mm C.I brass waste, 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 grams 32mm P.V.C waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm. nominal outer dia pipes

18.8.2 20mm. nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot & cold water supply including all CPVC External work

18.9.3 25 mm. nominal outer dia pipes

18.9.4 32 mm. nominal outer dia pipes

18.9.5 40 mm. nominal outer dia pipes

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep 600 x450mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12mm C.P. (1:4) with punning on inside and C.P (1:6) with 600 x 475mm G.I cover with frame (weight not less than 36 Kg) along with E/W in excavation and 80 mm thick P.C.C (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

S/F/F vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S approved make with 100mm H.C.I ‘P’ trap 15 liters C.I. pull and let go flushing cistern of names or other I.S.S equivalent make complete with all fittings, C.I. or C.C. brackets 32mm alkathene / P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I body brass spindle stop cock of weight not less than 50 grams 15mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I

Providing 12 mm thick C.P. (1:3) with 1.5 mm neat cement punning ---all complete job as per direction of E/I

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)

Supplying, fitting and fixing M.S. grill gate with M.S. grills/12mm Sqare Bar made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.)

Supplying, fitting and fixing M.S. grill gate with M.S. grills/12mm Sqare Bar made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing designation 75B one brick on edg soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plonth level: 1:2:4 (1 Cement :2 Coarse sand (zone-III) : 4 graded stone aggregate 20mm nominal size)

Providing designation 75 A brick on edge flooring in cement mortar (1:4) with top surface flush pointed in cement mortar (1:4) with approved quality of sand including the cost of curing, taxes, royalty all complete as per building specification and direction of E/l.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Supplying Un Skilled Labour for Cleaning the Site all Complete job As per specification and direction of E.I

Providing 1.5 mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.

Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding curing and taxes all complete as per building specification and direction of E/I.

Supplying M.S.Angle 65x65x6mm Shed

Supplying M.S.Angle 75x75x6mm Shed

Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S joist, channel, Angle, Tee, flat, plate, lattice member, built up compound section in column, girder, staircase, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing rust dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the cod/efficient as indicated in building specification.)

Wiring for light point/fan point/call bell point with 1.5sq.mm. fr pvc insulated copper conductor single core cable in ace/recessed PVC conduit, with modular type switch, phenolic laminated sheet, suitable size PVC/GI box etc. as required.

Wiring for light/power plug with 2x4sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no. 4sq.mm. FR PVC insulated copper conductor single core cable for loop earthling as required.

Wiring for circuit/sub-main wiring along with earth wire with the following sizes PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required.

(a) 2x2.5sq.mm.+1x2.5sq.mm. earth wire circuit (L/F)

(b) 2x4.0sq.mm.+1x4.0sq.mm. earth wire submain (L/F)

Supplying and fixing suitable size GI/PVC box on surface or in recess with phenolic laminated sheet cover in front including providing and fixing of 5pin 5/6Amp. socket outlet and 5/6Amp. modular type switch connection as reqd.

Supplying and fixing suitable size GI/PVC box on surface or in recess with phenolic laminated sheet cover in front including providing and fixing of 6pin 15/16Amp. socket outlet and 15/16Amp. modular type switch connection as reqd.

Supplying and drawing following size of FR PVC insulated copper conductor single core cable in the existing surface/ recessed steel/PVC conduit as required.

(a) 1x1.5sq.mm (for inverter wiring)

(b) 2x2.5sq.mm (for SV wiring)

Supplying and fixing 2 pin 5 amp. ceiling rose on the existing junction box/wooden block including connection as required.

Supplying and fixing batten/angle holder including connection etc. as required.

Supplying and fixing following modular type switch/socket on the existing switch box/cover including connections etc. as required

a) 5/6 amp, one way

b) 5/6 amp, 3 pin socket outlet

c) 151/6 amp, one way

(a) Electronic step fan regulator mini

Providing and fixing following capacity double pole/T.P. & N. Sheet metal switch disconnector fuses, unit in existing metal board with rewireable type fuse including drilling holes in metal board making connections etc. as required.

(a) 32 Amp. double pole

(b) 63 Amp. double pole

Providing and fixing following capacity bus bar chamber with 4 strips of suitable size made of copper, heavy complete with all accessories including connections earthling the body etc. as required.

S/F of the following way, single pole and neutral, sheet, MCB distribution board 240 volts on surface/recess, complete with tinned copper bus bar neutral bus bar, earthy bar detachable gland plate interconnections, phosphatized and power painted including earthling etc. as required.

(a) 8 way single door

S/F 6 amps. to 32amps. rating 240volts, ‘B’ series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required.

S/F 6 amps. to 32amps. rating 240 volts, ‘C’ series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required.

Supplying and fixing 40/45 watt LED type street light with dia cast aluminum housing for ingress protection of IP65 and complete with all accessories etc., on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.Bajaj, Bentec, Havelis

Supplying of 15/16 Watt LED bulb of approved brand as required.Bajaj, Bentec, Havelis

S/F/F 48'' (1200 mm) ceiling fan with all accesseries of approved mark Capital/Polar/Usha/Havells/Polycab/Orient/V-Guard/Bajaj/Crompton Greave/Philips Etc. as per required

I.T.C. of Ceilimng fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc as reqd.

Supplying and fixing electronic musical call bell suitable for D.C./A.C. single phase, 230 volts, complete as required.

Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

S/F Panel mounted changeover and fixing following capacity 4 pole ON-load panel mounted changeover switches in existing cubical panel board , making connection, earthing the body etc. as required. 200 amps, 4 pole

Laying of one number PILCA/PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1KV but not exceeding 11 KV of size not exceeding 120 sq mm direct in ground including excavation, and cushioning, protective covering and refilling the trench

Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.

(a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to 210.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

iv)32 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS : 2800 (partI) including necessary bolts & nuts of requried size complete.

200 mm clamp

Supplying fiting fixing flat flexiable submersibile cable with copper conductor, PVC Insulated and PVC Sheathed

3 core 4.0 sq mm

Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible Pump set 100 mm dia (with Polypropylene/ Noryl Impeller) up to 20 stages.

S/F/F Starter Pannel board including voltmeter, ameter, On/Off switch and provision for dry run protection as per IS Specification for 2 H.P. submersible motor pump encased in painted mild steel sheet box with glass front and looking arrangement complete assembly mounted on wall all complete job as per direction of E/I.

Carriage of Materials from quarry site to work site.

Local Sand

Chips

Bricks

Metal

Non Schedule Items

Supplying of ISI Mark IS: 15683, ISO and CE Certified Product and Multipurpose Uses ABC Type fire extinguisher 2 Kg with 5 years Warranty are effective for all types of fire like Class A, B and C types of fires as well as Electrical fires and also ABC Powder Type (Stored Pressure) Fire Extinguisher with containing Wall hook-1No., Discharge Nozzle-1No. with all complete.

Supplying of ISI Mark IS: 15683, ISO and CE Certified Product and Multipurpose Uses ABC Type fire extinguisher 4 Kg with 5 years Warranty are effective for all types of fire like Class A, B and C types of fires as well as Electrical fires and also ABC Powder Type (Stored Pressure) Fire Extinguisher with containing Wall hook-1No., Discharge Nozzle-1No. with all complete.

Supplying fitting and commissioning of 15kav silent generator (Kirlesker) of approved Brand, quality with all accessories all complete as per direction of E/I

Suppyling and fixing SS(Stainless Steel) Letters to write the name of Court & Establishment year on main entrance gate with all complete job. GRAM NAYAYALYA, JARMUNDI

Add 12% GST (In Basic Rate must fill 0.12)

Add 1% Labour cess (In Basic Rate must fill 0.01)

Sushil Kumar Dubey

Jay Prakash Singh