ETN0-92/EDC-MT/2024-2025

Amount

Carriage of following material from store center Meerut to Site of work including loading & unloading at both ends maximum distance up to 60 Km. :-

11 mtr. Long STP, SP-55 round Pole.

All other Material except Poles (33KV Disc/Fitting, Pin Insulator, ACSR Dog/Rabbit Conductor, Angle & Channel, stay earthing rod etc).

Safe carriage of 3x185 mm2 XLPE Cable from store centre Meerut to site store (under juridiction of PVVNL) including loading, unloading and both ends.

Providing and fixing 100 mm dia 3 mtr long G.I. pipe over 11 kv 3x185mm2 XLPE Cable before mounting the cable on double pole structure. This work includes supply & fixing of clamps, nut, bolt, sealing of top and bottom of pipe and one end of pipe is to be buried under earth about 500 mm including laying of cable in pipe (As Per Direction of Supervising Engineer).

Supply & laying of HDPE pipe PE-100 PN-6, DN-110 mm Dia Pipe for laying of 11 kv 3x185 mm2 , XLPE cable with HDD (Trenchless) Method for railway Crossing. (As Per Direction of Supervising Engineer).

Providing & making of 11 kv Outdoor type heat shrink XLPE Cable box of size 3x185 mm2 and crimping of proper size Aluminium lugs Work includes providing insulating tapes etc. (as per Respo Norms).

Providing of stone pad size 300x300x75mm as per Respo Norms.

The excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (750x450) mm and having depth of 1/6th of the full length of the support and Erection of support in the pit, after fixing stone pad . The work includes carriage and handling of supports from sectional store to pit site as well as fabrication work if required. (As Per Direction of Supervising Engineer).

11 mtr. Long STP round Pole. (Single Pole).

11 mtr. Long STP round Pole. (Double Pole Structure).

11 mtr. Long STP round Pole. (Tri Pole Structure& 01 pole old use).

Earthing of supports with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No.8SWG and including providing & fixing of earthing bolts. Every support & Matelic parts shall be be earth. (as per Respo Norms).

Fixing of 33KV X-arm 100x50x6mm (M.S Channel) F-Clamp made of M.S Flate of size 75x10mm and Fixing of 33KV V-type cross arm 100x50x6mm, 33KV F-bracket, 33KV Pin Insulator, 33KV Pin including providing of required clamps, nut & bolt as per Respo Norms.

The work includes carriage and handling of required accessories, from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.5mtr, from M.S.Angle 65x65x6mm/ 50x50x6mm, E-bracket, Disc insulator, top channel 125x65mm, 3200mm, T-off 125x65mm 1600mm, 33KV Disc fitting, 33 KV pin insulator, 33KV Pin etc including providing of E-brackets, required clamps, Nut & bolts as per Respo Norms/ as per schedule with required accessories. Providing as per Respo Drawing No.-DD&SO-20 Cross arm clamp, F-Clamp, Top Channel clamp, made of M.S flate of size 75x10mm, clamp made of M.S flate of size 65x8mm with Providing of X-bracing 4.5Mtr (M.S Angle 65x65x6mm, Top channel 125x65x6mm 3200mm long, Dropper channel 100x50x6mm 3200mm, T-Off 125x65, 1600mm, E-bracket and other requirement material. as per Respo Norms.

11 mtr. Long STP round Pole. (Double Pole Structure)

11 mtr. Long STP round Pole. (Tri Pole Structure)

Grouting of supports in CC 1:4:8 (Cement, sand & 40mm brick ballast). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grit) with muffing as per Respo Norms including providing of requried material. Providing of Ston Pad 300x300x75mm, Work includes back filling and proper ramming.

11 mtr. Long STP round Pole. (Single Pole)

11 mtr. Long STP round Pole. (Double Pole Structure)

11 mtr. Long STP round Pole. (Tri Pole Structure)

Stay rod (20x1800mm) with 7/8SWG (10Kg stay wire) and Grouting of stay rods(20x1800)mm including all work of excavation of earth 600x600x1300mm as per Respo Drawing DD&SO-31 & concreating in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per respo norms including providing of requried material. Including back filling of soil and proper ramming etc. as per Respo Norms.

Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per respo norms, including fixing of Stay Insulators of 33KV including providing of stay insulator and stay clamps, nut & bolts, etc. As per Respo Norms.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog/Rabbit conductor in accordance with Line chart including binding and fixing of all accessories in 03Nos. Conductor in parallel. Existing tilted Poles to be made straight, if required. as per Respo Norms.

Providing of P.G.Clamps of proper sizes at all section poles, suitable for Dog Conductor as per respo norms.

Sectional Double Pole

Sectional Tri Pole

Making Jumpers on Section Points, by fixing of P.G.Clamps of proper sizes, suitable for Dog Conductor as per respo norms.

Sectional Double Pole

Sectional Tri Pole

required quantity of 6SWG, 8SWG & 16SWG, GI wire & Guarding angle 75x75x6mm with eye bolt and Guarding between two poles like single poles, double poles, Tri pole, four poles, etc. to guard L.T., 11KV Line telephone and river crossing, road crossing etc. with G.I.wire No.6SWG and G.I.wire No.8SWG, including cutting with fabrication and fixing of guarding angle 75x75x6mm, including providing of requried clamps, nut & bolts, eye bolts etc, as per Respo Norms. Guarding clamp made of M.S Flate 65x8mm.

Providing of danger board at each location as per specification of the respo norms.

Fixing of danger board at each location as per specification of the respo norms.

Providing of Number Plate at each location as per specification of the respo norms.

Fixing of Number Plate at each location as per specification of the respo norms.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Providing of barbed wire on 33KV SP-72/SP-55 ST Poles as anti-climbing device.

Wrapping of barbed wire on 33KV SP-72/SP-55 ST Poles as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing & fixing of lower end & upper end clamps, made of M.S.Flat 40x5mm complete with nuts & bolts as per respo norms.

Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including provididng of all material (red oxicide and Aluminium paint), as well as rubbing/cleaning of surface as required for proper completion of work .

Single Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Double Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Tri Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Carriage of Received back Material from site to concerned electricity store centre :-

ST POLE off size

Rabbit/Dog conductor old & used

V type X-arm 11/33 kv

Dismanteling of 11 KV mtr. Long STP, SP-55 round Pole.

Dismanteling of rabbit/dog conductor.

Hi-tech power transmission (BID ID -5138359)

SHIVAM ENTERPRISES (BID ID -5140125)