OT35 Providing of rolling shutter

Drilling 18mm Dia holes in RCC surface, Supplying and fixing 300mm long 15mm PVC Pipe into the hole using lock fix with rendock plug including cost of all materials, labour, lead, lift, etc., hire charges for drilling machine, etc., complete. 100mm length PVC pipe to be protruded outside for enabling grouting. (Power supply will be provided at free of cost for the equipment at one point closer to the working area).

Grouting with PU Injection hydrophobic grout based on Polyurethane or its equivalent etc. through 12mm dia baker nozzle fixed in the RCC surface modifier to get pumpable consistency and grouting the prepared slurry in to the pre fixed nipple using 40PSI hand operated grout until the refusal of slurry including cost of Polyurethane sealent chemicals, Rendroc plug for fixing & refilling the plug surface, labour charges T&P, lead, lift, etc. complete.

Pluging the grout nipple using rapid setting Rendroc plug including the labour charges, cost of materials, T&P's, lead, lift, etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open ) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcemnt with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames, labour charges, lead, lift, T&Ps, etc., complete (The window should be got approved from the Executive Engineer before use on work)

Supplying and fixing of plain glass 4mm thick of approved quality as directed by the Engineer at site including cost of Silicon Glass sealent, transpoting of materials to site , labour charges, leads & lift, etc. complete.

Supplying and erecting pull and push type rolling shutter (Manually operated) with ISI make of approved size and section using 18G GI sheet. The shutter shall be painted with two coats of approved quality colour enamel paint over a coat of primer of red oxider and the rate is inclusive of hood covers, transportation charges, lead, lift etc., complete.

Providing PCC1:4:8 using 40mm HBG metal for platform foundation as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads, lifts, etc. complete

Providing PCC 1:2:4 using 20 mm HBG metal for platform flooring at chenmical storage room as directed by the Engineer at site, including shuttering charges, cost of all materials, labour charges, curing, lead, lift, etc., complete.

Plastering in C.M 1:5,12 mm thick for side wall of Lime storage platform including cost of all materials, labour charges ,curing, lead, lift etc complete.

Cleaning the surfaces of PTP Chemical Dosing tank . by scrapping of the dirt and algae, removal of debris including the cost of all tools & plants, all labour charges, leads, lifts etc., complete.

Supplying and laying in position of 25mm dia GI pipe line of medium class (B class) of approved make as directed by the Engineer in charge for water supply arrangements of including cost of all pipes, specials such as Tees, bends, couplings, union, cutting, threading, joining, scffolding, labour, lead, lift etc., complete

Supplying and fixing Gun Metal wheel valve of 25mm dia ISI make (Heavy duty) as approved by the Engineer in charge including cost of all materials, labour charges for fixing, lead, lift, etc., complete.

Chipping of concrete and roughening the surface as directed by the Engineer in charge including cost of all materials, labour charges for fixing, lead, lift, etc., complete.

Applying Nito Zinc primer coating or equivalent chemical to the exposed reinforcement rods,applying bonding agent viz.Nitrobond SBR coating to the exposed old concrete surface , providing Renderoc R G microconcrete mixed with water and sand overwhich suitable fininishing the surface neatly with plastering with CM 1:3,20mm thick consistency to the damaged area,finishng the surface neatly, working with all safety equipment including providing scaffolding arrangement,cost of all materials,charges for safety appliances all labur charges,curing charges all lead & lift ,conveyance of materials etc.complete.

Supplying, Fabricating and Fixing in Position of MS fully panelled Door of single leaf of required size using 40X40X5 mm MS Angles for door frame, 25X25X5 mm MS Angles for shutter frame by adopting 5 Nos. horizontally, 2 nos. vertically, shutter covered with 18 Gauge MS sheet, painting two coats with enamel paint over a coat of red oxide, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lift, etc complete.

Colour washing with two coats of cement paint over a coat of white cement for the exterior surfaces of PTP Tank Staircase flights & columns including cost of all materials, labour charges, curing, lead, lift etc., complete.

Painting the steel work with two coats of approved quality colour enamel paint over a one priming of coat of Niito zinc primer after removing old paint from steel old painting surface by rust remover from the Chemical House Doors & windows including cost of all materials, brushes, lead, lift etc.,complete.

Supplying, erecting and testing of 1HP 3phase mono block 2880 RPM self priming motor with 1.50Amps to 2.50Amps Relay setting starter of approved make with required accessories for pumping drinking water to higher elevation as directed by the Engineer in charge including cost of pumpset,erection charges,lead, lift etc.,complete

Dismantling the floor finish in cement mortar with cuddapah slabs and clearing of debris to a far away place finishing the dismantled surface neat including cost of all materials, labour charges, T&Ps, transporting charges, lead, lift, etc complete

Supplying and laying one side polished Cuddapah slab of 20/30 mm thick to Steps of PTP chemical Mixer tanks fixing of hand rails and cutting of holes in the cuddapah slab upto steps including cost of all materials, labour, lead, lift etc., complete.

Supplying, fabricating and fixing of M.S structural works using M.S square rod or MS pipes of various sizes for vertical and other supports etc., as directed by the Engineer at site including cost of all materials, labour charges, scaffolding, welding, bolts and nuts as required, lead, lift, etc., complete..

Painting the steel work with two coats of approved quality colour enamel paint over a coat of primer of Nito Zinc primer to the Hand rails for the Clarifier parshall flume and flash mixer tank Steps including cost of all materials, brushes, lead, lift etc., complete .