Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-AOC | L1 | Accepted-AOC allotted being lowest | |
| 2 | L2₹2.9 L+₹15,540.98 (5.74%)Rejected-Finance | L2 | Rejected-Finance rejected being on higher side |
Tender Value
₹3.1 L
EMD Value
₹6,120
Closing Date
19 Jul 2022, 5:00 pmClosed
Executive Engineer
1st Floor Nirman Sadan Civil Lines, Gurugram
Annual Repair for 1170 and 770 sft quarters at Officer Colony No. 4 Gurugram for the year 2022-23
2022_HRY_228826_1
PWD/PD1GGN/04.07.2022-13
Open Tender
Civil Works
Works
270 days
Gurugram
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹6,120
Yes
27 Sept 2022
5 Jul 2022
20 Jul 2022
5 Jul 2022
19 Jul 2022
5 Jul 2022
Amount
10 mm thick cement plaster 1 :3 (1 cement: 3 fine sand)[New HSR 11.4.2]
12 mm cement plaster of mix. (4). 1 : 6 (1 cement: 6 fine sand) [New HSR 11.5.4]
15 mm cement plaster on the rough side of single or half brick wall of mix 1 :4 (1 cement: 4 fine sand)(New HSR 11.6.1)
Cement pointing 1 :2 on lining On side slopes(HSR 14.23.2)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm(HSR 10.63.2)
Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (1) 4.0 mm thick glass panes. [New HSR 13.10.1]
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete. [New HSR 11.58]
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per litre. of approved manufacturer and of required shade and colour complete. as per manufacture r's specification. (1). One or more coats on old work. [New HSR 30.34.1]
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. (1). Old work (one or more coats). [New HSR 30.25.1]
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.(1). One or more coats on old work [New HSR 30.28.1]
Finishing walls with Acrylic Smooth exterior paint of required shade.(2). Old work (Old work (Two or more coat applied @ 1.67 litre/ 10sqm) on existing cement paint surface). [New HSR 30.37.1]
Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mudplaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1 :3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal ofunserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge.(HSR 30.9)
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excludingpanelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} Second class teak wood 35 mm thick shutters(HSR 12.7.1.1)
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 2nd class teak wood beading 62X19 mm(HSR 12.53.1) Note 1 :-In case of any difference in the unit & nomenclature of any of the HSR items of civil,PH work depicted in this DNIT and that given in HSR,the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (Make/brand exhibited in HSR and exhibited in approved standard documents) as approved by the Engineer-in-charge,while executing various items/work at site. 3. HSR items beyond DNIT shall be paid as per HSR+Ceiling premium. No extra rate shall be payable.
MAHENDER SINGH
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .