REPAIR MAINT AND IMPROVEMENT OF MAIN DISTRIBUTION BOARDS SERVICE CONNECTION, SUBMAIN WIRING, BLDG SECURITY LIGHTS, BLDG EARTHING AND CONNECTED WORK AND REPAIR MAINT AND IMPROVEMENT TO OF ELECTRIC DISTRIBUTION SYSTEM INCLUDING FEEDER PILLAR BOXES, BUS

Amount

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. Note: Credit for above items shall be made as per credit Schedule separately

Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases( making good all to the disturbed surfaces as per existing) including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:-

One light point controlled by one way Modular switch 5 amp complete.

One ceiling fan/ exhaust fan point controlled by one way Modular switch 5 amp and one regulator complete.

One 3 pin 5 Amps socket point controlled by one Modular switch on same board.

One 3 pin 5 Amps socket point controlled by one Modular switch on independent board.

One bell point controlled by one Modular push button on independent board

One light point controlled by two 2-way Modular switches

All as per item No. 4 above but for 3 pin / 5 pin 16 Amps Modular sockets outlet with 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent point wiring complete all as specified and as directed .

All as per item No. 4 above but for 3 pin / 5 pin 16 Amps Modular sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent point wiring complete all as specified and as directed.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified. Make :- Cat part No AHFSXXW101 of havells or equivalent make given under list of makes.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified. Make :- Cat part No AHFSBIW101 of havells or equivalent make given under list of makes.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified. Make :- Cat part No AHFSXXW161 of havells or equivalent make given under list of makes.

Supply & Fixing Modular fan Regulator electronic step type, 2 Module complete all as specified. Make :- Cat part No AHFRFXW005 of havells or equivalent make given under list of makes.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified. Make :- Cat part No AHFKPXW065 of havells or equivalent make given under list of makes.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified. Make :- Cat part No AHFKCXW163 of havells or equivalent make given under list of makes..

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified. Make :- Cat part No AHFSXXW102 of havells or equivalent make given under list of makes.

M&L for Modular white cover with frame 1 Module all as specified and directed.

M&L for Modular white cover with frame 2 Module all as specified and directed.

M&L for Modular metal flush box 1/2 Module complete all as specified and directed.

M&L for Modular metal flush box 3 Module including modular white cover with frame complete all as specified and directed. Make :- Cat part No AHFPLCWV03 of cover frame and AHZXMIIX03 of metal flush box of havells or equivalent make given under list of makes.

M&L for Modular metal flush box 4 Module including modular white cover with frame complete all as specified and directed. Make :- Cat part No AHFPLCWV04 of cover frame and AHZXMIIX04 of metal flush box of havells or equivalent make given under list of makes.

M&L for Modular metal flush box 6 Module including modular white cover with frame complete all as specified and directed. Make :- Cat part No AHFPLCWV06 of cover frame and AHZXMIIX06 of metal flush box of havells or equivalent make given under list of makes.

M&L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases (making good all to the disturbed surfaces as per existing) including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour including sunk cast iron /pressed steel/terminal boxed for mounting switches/sockets etc with 3 mm thick phenolic laminated sheet covers all as specified and directed by Engineer-in-charge.

One light point controlled by one way switch 5 amp complete.

One fan/exhaust fan point controlled by one way switch 5 amp complete.

One 3 pin Socket outlet 5 Amp on same board controlled by one way switch 5 amp complete.

One 3 pin Socket 5 Amp on Independent board controlled by one way switch 5 amp complete.

One bell point controlled by one way switch 5 Amp on independent board

All as per item No. 20 but for 3 pin / 5 pin 16 Amps sockets outlet with 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent point wiring complete all as specified and as directed .

All as per item No. 20 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

S&F switch piano type, SP, one way, flush type 5 Amps.

S&F socket outlet 2 in 1 flush type 5 pin 5 Amp.

S&F socket outlet 2 in 1 flush type 3 pin 5 & 15 Amp.

S&F switch piano flush type 15 Amp 240 volt.

S&F bell push siwtch piano flush type, SP, one way, 5 Amps.

Supplying and fixing electronic fan regulator step type, flush type on the exiting phenolic laminated sheet all as directed.

Supplying and Fixing ceiling rose 3 terminal surface bakelite 65mm x 50mm three terminals complete all as specified.

Supplying and fixing Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supplying and fixing Bell Multi Music type, 230 Volts complete with connection all as specified & directed.

M&L for Sub Main wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run 4 Sqmm single core cable, one run of 4 Sq mm earth wire & One run of PVC conduit shall be measured as one unit length.

M&L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run 6 Sq mm single core cable, one run of 6 Sq mm earth wire & One run of PVC conduit shall be measured as one unit length.

Supplying & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make :- Cat part No LHEXBLP7PN1W020 of havells or equivalent make given under list of makes.

Supplying & fixing in replacement indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make :- Cat part No LHEXAPP7IN1W020 of havells or equivalent make given under list of makes.

Supplying & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make :- Cat part No LHEXBLP7PN1W009 of havells or equivalent make given under list of makes.

Supplying & fixing decorative Wall light fitting brushed nickle finish with opal glass diffuser including 9 watt LED lamp B22 base complete with all accessories and including connection complete all as specified and as directed. Make :- Cat part No LHFOAJE1TZ1I6060 of havells or equivalent make given under list of makes.

Supplying & fixing LED Decorative bed side light fitting 3W flexible cord complete with all accessories and including connection complete all as specified and as directed. Make :- Cat part No 48042 of philips or equivalent make given under list of makes.

Supply and fix LED 9 W suitable for normal holder (Base Cap B22) complete all as specified.

Supply & fix surface mounted bulk head LED light fitting including 10 watt LED lamp B22 base complete with all accessories and connection complete all as specified and as directed. Make: Cat part No HEXAFT10WLED857SSYMBOPC of havells or equivalent make given under list of makes.

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified. Make :- Cat part No ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC of havells or equivalent make given under list of makes.

M&L for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, 4 way complete all as specified.

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, 8 way complete all as specified.

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, 12 way complete all as specified.

S&F TPN Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections. Make : Cat part No DHDLVDRWGOFO04 of havells or equivalent. Note : -MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as directed & rate shall be deemed to be included in unit rate quoted.

Supply & fix in replacement of MCCB 125 Amps,' C' series , bracking cap16 KA, 4 Pole, 415V complete all as specified and directed.

Supply & fix in replacement of MCCB 100 Amps,' C' series , bracking cap16KA, 4 Pole, 415V complete all as specified and directed.

Supply & fix in replacement of MCB SPN 63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed. Make :- Cat part No DHMGCSNF063 of havells or equivalent make given under list of makes.

Supply & fix in replacement of MCB SPN 40 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed. Make :- Cat part No DHMGCSNF040 of havells or equivalent make given under list of makes.

Supply & fix in replacement of MCB SPN 6-32 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed. Make :- Cat part No DHMGCSNF006-032 of havells or equivalent make given under list of makes.

Supply & fixing in replacement of MCB SP 6 - 32 Amps, 'C' series, bracking cap 10KA, 240V complete all as specified and directed. Make :- Cat part No DHMGCSPF006-032 of havells or equivalent make given under list of makes.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Excavating in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out in soft/loose soil all as specified and as directed by Engr-In-Charge.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified.

Cutting existing road with width not exceeding 900 mm and 0.30 m deep for laying/ repair of electric cables and filling back with excavated soil except road portion which shall be make good with cement concrete M-15 grade (Nominal mix) using 20 mm graded stone aggregate complete all as specified and directed at site.

Supply and laying un-reinforced precast concrete cable cover class LV type I flat of size 250mm x 150mm x 40mm all as specified factory made ISI marked.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Supply and lay GI tubing, light grade, 50 mm bore dia as cable protection fixed on walls/poles/laid in trenches complete including dismantling corroded GI pipe all as specified and as directed.

S & F cable path indicator made of MS sheet 3 mm thick of size 200 x 150 mm spot welded with angle iron of 40x40x5 mm thick 750mm long embedded in PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate incl painting with two coat of synthetic enamel black paint over one coat of red oxide primer and sign writting with white paint showing grade of cable HT/LT complete all as directed

Taking down old unserviceable cable any size complete all as directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, laid in trenches / duct / fixing on walls / poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core, laid in trenches / duct / fixing on walls / poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core, laid in trenches / duct / fixing on walls / poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed.

Supply, installing in replacement testing and commissioning of Pressure booster pump, single phase, capacity 1 HP, 220-240 volt, 50 Hz, head range upto 52 M, disharge range upto 140 LPM, type of insulation B class including protection against over current, low voltage, dust and water entry, IP 44 protection complete all as specified and as directed. Make: Kirloskar model No CPBS-73624H/V or equivalent make given under list of makes.

M&L for complete removal of exisiting paint and preparation of steel surface and applying two coats of aluminium paint and writing pole Nos. including one coat of cement base paint on PCC muff on LT 09m long tubular pole all as directed by Engr-In-Charge.

M&L for preparation of old concrete surface of pole 9m long painting to PCC pole in Black & White strip 30cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enamel paint, writing pole Nos. & applying one coat of cement base paint on PCC muff & remaining portion of the pole all as directed by Engr-In-Charge.

M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting.including minor repairs welding etc Painting LT panels with two coats of synthetic enemal paints complete all as directed by Engr-In-Charge.

Suplying and fixing thermoplastic polystyrene/polycarbonate enclosure busbar chambr three phase four wire of 100 amp rating of size 202 mm x 238 mm x 111 mm complete with shock proof, vermin proof and dust proof halogen and silicon free UV resistane with internally embedded gasket high grade gasket made of polyurethane complete with required terminals (1 row, 6 module) with one no. MCB SP 16 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole /wall complete all as specified and directed.

S&F Heat shrinkable PVC sleeve suitable for XLPE LT UG cable fo following sizes complete

S&F aluminium lugs for the following sizes complete all as specified and directed

25 to 50 Sqmm

50 to 70 Sqmm

70 to 95 Sqmm

120 to 150 Sqmm

185 to 240 Sqmm

300 to 400 Sqmm

Supplying and fixing in replacement of MCCB 630Amp rating,4-pole 415V, Electronic release with overload and short circuit adjustable type breaking capacity 36 KA.

Supplying and fixing in replacement of MCCB 400Amp rating,4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36 KA.

Supply and fixing in replacement of MCCB 250Amp rating,4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 25KA.

Supply and fixing in replacement of MCCB 100Amp rating,4-pole 415V, adjustable thermal adjustable megnetic type adjustable thermal adjustable megnetic type breaking capacity 16KA.

Supply and fixing in replacement of MCCB 250Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 25KA.

Supply and fixing in replacement of MCCB 200Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 25KA.

Supply and fixing in replacement of MCCB 160Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 25KA.

Supply and fixing in replacement of MCCB 100Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA.

Supply and fixing in replacement of MCCB 63Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA.

Labour & tools for trimming tree branches upto 100 mm girth of any location around existing HT/LT OH lines giving clearance of 1.5 m on all sides complete. Note:- Trimming of tree branches irrespective in numbers in each tree shall be measured as one unit.

Cutting wild grass, bushes, creaper, unwanted vegetation from inside / surrounding of E/M installations, near transformers, pole structures etc including cutting creapers from barbed / cattle fencing of the installations as when directed and removing of unwanted material from installation compound and depositing where directed. Note :- The item shall be operated maximum three times in entire period of contract in the same installations. Area measured separately each time.

M&L for stay assembly complete with MS stay plate 300x300x6mm thick galvanized stay rod not less than 20mm dia, 2.15 M long galvanized stay bow, galvanized thimble,stay clamp etc. all as shown in electrical plate No1of SSR part-I Note:- Excavation, earthwork, cement concrete loop type insulators and stay wire shall be included in unit rates

M&L Galvanised stay strand, size 7/4mm complete

M&L for Steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of following sizes complete:-

50 mm bore

80 mm bore

Supplying, laying or fixing or passing through pipe, testing and commissioning XLPE insulated, steel tape / wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of following nominal cross sectional area :-

25 Sqmm, 3.5 core.

35 Sqmm 3.5 core.

50 Sqmm 3.5 core.

70 Sqmm 3.5 core.

95 Sqmm 3.5 core.

Dismantling of old unserviceble Aluminium conductor off sizes from existing over head lines complete all as specified and directed by Engr-in-Charge.

All as per item No 90 above but GI wire/stay wire.

Dismantling / taking down old unserviceable pin/loop/shackle type insulator any type / size.

Dismantling unserviceable any size of cross arms and anti climbing devices from pole /structures. complete all as specified and directed.

M&L for ACSR conductor any sizes drawn over for over head lines fixed to insulators with binding wire after allowing specified sag complete all as specified and as directed by Engr-in-Charge.

M&L for GI wire 4mm dia as continuous earth wire, guarding and craddles to OH line including binding wire complete all as specified and as directed by Engr-in-Charge.

Supply & fixing pin type porcelain vitreous insulator 100 mm height and 65 mm dia for 1100 Volts grade including galvanised mild steel spindle, one nut and two washers complete all as specified.

Supply and fixing shackle type insulator porcelain vitreous white,brown and green of size 75 mm height and 90 mm dia incl galvanised MS straps 31x3 mm size ,washers,insulator bolt 12 mm dia and nut for working pressure 1100 Volts grade complete all as specified.

M&L for loop insulator, vitreous, porcelain, white, brown or green, large size with overall dimensions 50x140mm clearance of hole 25.5 mm complete.

M&L for work confirming to Fe-410-O or Fe-310-O as in cross arms, support, bracings, stiffeners, clamps channels fabricated from structural steel including nuts, bolts and washers welding, bending cold or hot drilling holes for bolts in any shape or size all as directed including two coats of aluminium paint over a coating of red oxide primer all as directed by Engr-In-Charge.

M&L for Cable route indicator showing "LT Cable" and route/joint of cable with arrow made of PCC 1X2X4 type B1 duly rendered with plaster 10 mm thick of size 40 X50X20cm fixed and erected on PCC plateform of sixe 40X40X10 CM goruted in grounts duly painted on both sides with LT Cable Route complete all as diected.

M&L for dismantaling of old/unserviceable PCC poles/struts any type and size.

Supply & install steel tubular swaged poles type 410 SP -31 of 9.0 metres long complete with CI base plate complete including foundation all as specified and directed by Engr-in-charge with following work : (a). Excavation in post holes in any type of soil not exceeding 0.5 cum each, getting out, returning filling in and well ramming earth in layers not exceeding 25 cm watering and disposal of surplus soil to a distance not exceeding 50 m and making good surface. (b) PCC M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate in base (0.90m x 0.60m x 0.15m height)in foundation filling as lean concrete. (c) PCC M-10 grade (Nominal mix) using 40 mm graded stone aggregate in foundation filling (0.60m x 0.60m x 1.5m height). (d) PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate as in coping (0.45m x 0.60m 0.45m height ). (e) M&L for applying two coats of aluminum paint over a coat of red oxide primer and making alternate colour bands of black & yellow colours in 30 cm width upto a height of 1.5 mtr from pole coping with synthetic enamelled paint complete.

Supplying and fixing in replacement onload change over 415 volts,50Hz,100 amps confirms to IS13947-3 with sheet steel enclosure. Make:- Standard Cat part No-ISCNF00100 or equialvent approved make given under list of makes.

Supplying and fixing onload change over 415 volts ,50Hz, 200 amps confirms to IS13947-3with sheet steel enclosure. Make:-Standard Cat part No-ISCNF00200 or equialvent approved make given under list of makes

Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost complete. Note: GI strip beyond 5.0Mtr length from earth electrode shall be measured and paid separately).

M&L for GI strip of size 32x6mm as earth continuity conductor burried in ground or drawn in pipe or fixed to wall on saddle.

M&L for earth continuity conductor galvanised iron wire 4 mm dia .

Supply and fixing GI funnel complete with wire mesh for earthing water pipe.

M&L for earth pit cover of size 450x450x50mm thick of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape complete all as specified and as directed

Stringing of existing overhead LT line ACSR conductor of any size opening /dismenting of jumpers and ACSR conductors from insulators and connecting after stringing inclusing required ACSR conductore/connectors of following span of conductors :-

Span of two/three ACSR conductors of any size

Span of four /five ACSR consutors of any size

M/S Rajeev Sharma and Co.

Ms Kamal Kant Agarwal