NIT NO. 173/Durg(Khairagarh)/2026

NIT SCHEDULE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

P.A.C. Rs. 60.00 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 480.00 Cum 185.00 8880000

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 28.50 Sqm 2016.00 5745600

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 43.00 Each 284.00 1221200

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 120.00 Cum 65.00 780000

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 405.10 Cum 371.00 15029200

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 8.00 Each 1053.00 842400

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 35.78 Cum 3263.00 11675000

8 7 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 40.20 Sqm 382.00 1535600

7 11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 17.00 Sqm 394.00 669800

9 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 405.45 Sqm 436.00 17677600

10 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 63.00 Each 100.00 630000

11 2 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 105.10 Sqm 139.00 1460900

12 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 17.00 Each 46.50 79100

13 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 140.00 Each 33.50 469000

14 16 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 510.00 Kg 1.00 51000

15 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 83.71 Cum 263.00 2201600

16 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 98.15 Sqm 13.50 132500

17 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 1020.50 Sqm 22.50 2296100

18 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 1690.30 Sqm 11.00 1859300

19 16 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 18.13 Sqm 768.00 1392400

20 16 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 17.00 Each 16.50 28100

21 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 70.15 Cum 2970.00 20834600

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 24.18 Cum 2659.00 6429500

22 3 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 12.90 Cum 4163.00 5370300

23 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 18.60 Cum 3552.00 6606700

24 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 1400.00 Kg 54.50 7630000

25 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 50.00 Each 68.50 342500

26 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41.80 Cum 3817.00 15955100

27 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 20.00 Each 1776.00 3552000

28 2 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 40.50 Sqm 294.00 1190700

29 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 80.00 Each 154.00 1232000

30 8 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 36.20 Sqm 1126.00 4076100

31 8 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 27.00 Each 256.00 691200

32 8 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 17.00 Each 496.00 843200

33 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 17.00 Each 53.50 91000

34 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 31.00 Each 34.50 107000

35 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 36.00 Each 51.00 183600

36 8 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 20.00 Each 13.00 26000

37 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 6.20 Sqm 3330.00 2064600

38 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 1090.00 Kg 73.50 8011500

39 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 2080.40 Kg 68.00 14146700

40 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 240.80 Sqm 569.00 13701500

41 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 411.10 Sqm 331.00 13607400

42 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 1210.00 Kg 61.50 7441500

43 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 405.00 Kg 331.00 13405500

44 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 405.00 Kg 338.00 13689000

45 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 1.30 Cum 61051 7936600

46 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 78.40 Sqm 708.00 5550700

47 10 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 140.20 Sqm 810.00 11356200

10 1 3 0.63 mm thick sheet (weight 5.70 kg/m2) 360.90 Sqm 678.00 24469000

48 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 46.50 Sqm 347.00 1613600

49 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 48.80 Sqm 610.00 2976800

50 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 52.40 Sqm 563.00 2950100

51 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 68.20 Met. 346.00 2359700

52 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 90.80 Sqm 2399.00 21782900

53 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 310.00 Sqm 87.00 2697000

54 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 520.00 Sqm 91.50 4758000

55 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 290.00 Sqm 96.50 2798500

56 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 375.52 Sqm 107.00 4018100

57 11 5 4 Neat Cement punning. 50.50 Sqm 33.00 166700

58 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 120.90 Sqm 254.00 3070900

59 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 480.60 Sqm 587.00 28211200

60 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 325.50 Sqm 692.00 22524600

2 Size above 300x300mm 197.878 Sqm 728.00 14405500

61 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 1020.00 Kg 75.00 7650000

63 12 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 18.60 Sqm 1576.00 2931400

64 12 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 234.987 Sqm 1082.00 25425600

65 12 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 20.60 Sqm 1497.00 3083800

66 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 120.40 Sqm 280.00 3371200

67 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 17.00 Each 2882.00 4899400

68 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 280.20 Sqm 132.00 3698600

69 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 17.00 Each 729.00 1239300

70 17 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 44.20 Sqm 524.00 2316100

71 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 25.00 Each 2459.00 6147500

72 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 7.00 Each 2014.00 1409800

73 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 2.00 no. 3876.00 775200

74 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 15.00 Each 1430.00 2145000

75 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 150.00 Met. 182.00 2730000

76 18 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 5.16 Each 254.00 131100

77 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 50.00 Each 113.00 565000

2.1 Double "Y" with or without door 75 mm 20.00 Each 129.00 258000

3.1 Vent covel 75 mm 20.00 Each 34.00 68000

4.1 Access door cap 75 mm 15.00 Each 49.50 74300

5 "P" trap 110mmx110mm long 7.00 Each 227.00 158900

6 Nahani trap 110x75mm 30.00 Each 90.50 271500

7 Multi floor trap 110 5.00 Each 122.00 61000

8 Plain reducing Tee 110x75mm 5.00 Each 129.00 64500

78 18 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 20.00 Each 57.00 114000

79 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 200.00 Met. 110.00 2200000

2 20 mm nominal outer dia .Pipes. 280.00 Met. 151.00 4228000

3 25 mm nominal outer dia .Pipes. 120.00 Met. 199.00 2388000

80 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 50.00 Met. 188.00 940000

2 20 mm dia nominal bore 60.00 Met. 221.00 1326000

3 25 mm dia nominal bore 82.00 Met. 297.00 2435400

81 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 120.40 Met. 131.00 1577200

2 20 mm dia. nominal bore 50.00 Met. 159.00 795000

82 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 10.00 Each 85.00 85000

2 20 mm nominal bore 10.00 Each 98.00 98000

3 25 mm nominal bore 8.00 Each 117.00 93600

83 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20.00 Each 186.00 372000

2 20 mm nominal bore. 7.00 Each 199.00 139300

3 25 mm nominal bore. 7.00 Each 218.00 152600

84 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 70.00 Each 185.00 1295000

2 Bib cock (350 grams) 34.00 Each 237.00 805800

3 Stop cock (350 grams) 34.00 Each 237.00 805800

85 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 20.00 Each 382.00 764000

2 Long nose bib cock (500 grams) 30.00 Each 455.00 1365000

3 Long body bib cock (500 grams) 50.00 Each 426.00 2130000

4 Piller Cock (400 grams) 20.00 Each 398.00 796000

5 Two way bib cock (800 grams) 7.00 Each 708.00 495600

6 Stop cock (concealed) (600 grams) 7.00 Each 494.00 345800

7 Angle valve for basin mixer and geyser points (450 grams) 3.00 Each 382.00 114600

8 Basin mixer pillar tap with spout (1000 grams) 3.00 Each 1248.00 374400

9 Kitchen sink mixer with cast swivel spout (1000 grams) 3.00 Each 1248.00 374400

10 Wall mixer with elegant knob (1400 grams) 3.00 Each 1787.00 536100

11 Hand shower set with flexible extension pipe 3.00 Each 754.00 226200

12 Bottle trap set with extension pipes each 3.00 Each 473.00 141900

13 Toilet paper holder 3.00 Each 248.00 74400

14 Soap dish plate 3.00 Each 163.00 48900

15 Shower rose (revolving type) (150mm) 15.00 Each 269.00 403500

16 Towel rail (600mm long x 20mm dia) 15.00 Each 338.00 507000

17 Towel ring (150 mm dia) 3.00 Each 254.00 76200

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 3.00 Each 1764.00 529200

19 Health foscet (hand jet) with flexible connection pipe (for WC) 3.00 Set 774.00 232200

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 3.00 Set 577.00 173100

86 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 7.00 Each 51.00 35700

87 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 6.00 Each 436.00 261600

2 32 mm nominal bore. 6.00 Each 510.00 306000

88 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 2.00 Each 7564.00 1512800

89 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 5000.00 Liter 7.30 3650000

90 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 10.00 Each 413.00 413000

91 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 Each 4644.00 1857600

92 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 Each 8013.00 3205200

93 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3.00 Each 11021.00 3306300

94 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3.00 Each 4356.00 1306800

95 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 2.00 Each 4133.00 826600

96 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 50.00 Met. 262.00 1310000

97 1 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 32.00 Cum 26.50 84800

98 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 48.50 Cum 3384.00 16412400

99 7 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 102.40 Sqm 62.50 640000

100 1 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 500.00 Sqm 7.20 360000

101 2 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 46.00 Sqm 228.00 1048800

2 1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 50.00 Sqm 297.00 1485000

2 1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 25.00 Sqm 235.00 587500

2 1 8 Beams, lintels, cantilevers & walls. 40.00 Sqm 202.00 808000

102 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 67.90 Sqm 2005.00 13614000

103 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 27.20 Sqm 1780.00 4841600

104 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 380.15 Kg 67.50 2566000

105 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 66.20 Sqm 658.00 4356000

106 14 5 1 White washing with lime to give an even shade. On new work (Three or more coats) 150.22 Sqm 9.40 141200

107 14 7 1 Colour washing such as green, blue or buff with lime to give an even shade. On new work (two or more coats) including a base coat of white washing 98.20 Sqm 12.00 117800

108 14 9 1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) 180.90 Sqm 38.00 687400

109 14 10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats) 509.40 Sqm 44.50 2266800

110 14 12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 490.40 Sqm 23.00 1127900

111 14 13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 325.00 Sqm 94.50 3071300

112 14 14 1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) 1220.25 Sqm 41.00 5003000

113 14 16 1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 250.10 Sqm 74.50 1863200

114 14 22 1 Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint 40.20 Sqm 55.00 221100

Total 599971100

Say Rs. 60.00 Lakhs

RUPEES EIGHTY LAKHS ONLY

ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER P.W.D. SUB DIVISION NO. 2, DURG (C.G.)

P.A.C. Rs. 60.00 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 480.00 Cum 185.00 8880000

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 28.50 Sqm 2016.00 5745600

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 43.00 Each 284.00 1221200

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 120.00 Cum 65.00 780000

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 405.10 Cum 371.00 15029200

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 8.00 Each 1053.00 842400

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 35.78 Cum 3263.00 11675000

8 7 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 40.20 Sqm 382.00 1535600

7 11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 17.00 Sqm 394.00 669800

9 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 405.45 Sqm 436.00 17677600

10 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 63.00 Each 100.00 630000

11 2 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 105.10 Sqm 139.00 1460900

12 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 17.00 Each 46.50 79100

13 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 140.00 Each 33.50 469000

14 16 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 510.00 Kg 1.00 51000

15 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 83.71 Cum 263.00 2201600

16 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 98.15 Sqm 13.50 132500

17 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 1020.50 Sqm 22.50 2296100

18 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 1690.30 Sqm 11.00 1859300

19 16 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 18.13 Sqm 768.00 1392400

20 16 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 17.00 Each 16.50 28100

21 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 70.15 Cum 2970.00 20834600

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 24.18 Cum 2659.00 6429500

22 3 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 12.90 Cum 4163.00 5370300

23 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 18.60 Cum 3552.00 6606700

24 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 1400.00 Kg 54.50 7630000

25 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 50.00 Each 68.50 342500

26 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41.80 Cum 3817.00 15955100

27 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 20.00 Each 1776.00 3552000

28 2 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 40.50 Sqm 294.00 1190700

29 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 80.00 Each 154.00 1232000

30 8 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 36.20 Sqm 1126.00 4076100

31 8 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 27.00 Each 256.00 691200

32 8 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 17.00 Each 496.00 843200

33 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 17.00 Each 53.50 91000

34 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 31.00 Each 34.50 107000

35 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 36.00 Each 51.00 183600

36 8 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 20.00 Each 13.00 26000

37 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 6.20 Sqm 3330.00 2064600

38 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 1090.00 Kg 73.50 8011500

39 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 2080.40 Kg 68.00 14146700

40 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 240.80 Sqm 569.00 13701500

41 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 411.10 Sqm 331.00 13607400

42 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 1210.00 Kg 61.50 7441500

43 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 405.00 Kg 331.00 13405500

44 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 405.00 Kg 338.00 13689000

45 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 1.30 Cum 61051 7936600

46 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 78.40 Sqm 708.00 5550700

47 10 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 140.20 Sqm 810.00 11356200

10 1 3 0.63 mm thick sheet (weight 5.70 kg/m2) 360.90 Sqm 678.00 24469000

48 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 46.50 Sqm 347.00 1613600

49 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 48.80 Sqm 610.00 2976800

50 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 52.40 Sqm 563.00 2950100

51 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 68.20 Met. 346.00 2359700

52 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 90.80 Sqm 2399.00 21782900

53 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 310.00 Sqm 87.00 2697000

54 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 520.00 Sqm 91.50 4758000

55 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 290.00 Sqm 96.50 2798500

56 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 375.52 Sqm 107.00 4018100

57 11 5 4 Neat Cement punning. 50.50 Sqm 33.00 166700

58 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 120.90 Sqm 254.00 3070900

59 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 480.60 Sqm 587.00 28211200

60 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 325.50 Sqm 692.00 22524600

2 Size above 300x300mm 197.878 Sqm 728.00 14405500

61 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 1020.00 Kg 75.00 7650000

63 12 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 18.60 Sqm 1576.00 2931400

64 12 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 234.987 Sqm 1082.00 25425600

65 12 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 20.60 Sqm 1497.00 3083800

66 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 120.40 Sqm 280.00 3371200

67 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 17.00 Each 2882.00 4899400

68 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 280.20 Sqm 132.00 3698600

69 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 17.00 Each 729.00 1239300

70 17 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 44.20 Sqm 524.00 2316100

71 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 25.00 Each 2459.00 6147500

72 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 7.00 Each 2014.00 1409800

73 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 2.00 no. 3876.00 775200

74 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 15.00 Each 1430.00 2145000

75 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 150.00 Met. 182.00 2730000

76 18 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 5.16 Each 254.00 131100

77 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 50.00 Each 113.00 565000

2.1 Double "Y" with or without door 75 mm 20.00 Each 129.00 258000

3.1 Vent covel 75 mm 20.00 Each 34.00 68000

4.1 Access door cap 75 mm 15.00 Each 49.50 74300

5 "P" trap 110mmx110mm long 7.00 Each 227.00 158900

6 Nahani trap 110x75mm 30.00 Each 90.50 271500

7 Multi floor trap 110 5.00 Each 122.00 61000

8 Plain reducing Tee 110x75mm 5.00 Each 129.00 64500

78 18 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 20.00 Each 57.00 114000

79 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 200.00 Met. 110.00 2200000

2 20 mm nominal outer dia .Pipes. 280.00 Met. 151.00 4228000

3 25 mm nominal outer dia .Pipes. 120.00 Met. 199.00 2388000

80 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 50.00 Met. 188.00 940000

2 20 mm dia nominal bore 60.00 Met. 221.00 1326000

3 25 mm dia nominal bore 82.00 Met. 297.00 2435400

81 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 120.40 Met. 131.00 1577200

2 20 mm dia. nominal bore 50.00 Met. 159.00 795000

82 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 10.00 Each 85.00 85000

2 20 mm nominal bore 10.00 Each 98.00 98000

3 25 mm nominal bore 8.00 Each 117.00 93600

83 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20.00 Each 186.00 372000

2 20 mm nominal bore. 7.00 Each 199.00 139300

3 25 mm nominal bore. 7.00 Each 218.00 152600

84 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 70.00 Each 185.00 1295000

2 Bib cock (350 grams) 34.00 Each 237.00 805800

3 Stop cock (350 grams) 34.00 Each 237.00 805800

85 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 20.00 Each 382.00 764000

2 Long nose bib cock (500 grams) 30.00 Each 455.00 1365000

3 Long body bib cock (500 grams) 50.00 Each 426.00 2130000

4 Piller Cock (400 grams) 20.00 Each 398.00 796000

5 Two way bib cock (800 grams) 7.00 Each 708.00 495600

6 Stop cock (concealed) (600 grams) 7.00 Each 494.00 345800

7 Angle valve for basin mixer and geyser points (450 grams) 3.00 Each 382.00 114600

8 Basin mixer pillar tap with spout (1000 grams) 3.00 Each 1248.00 374400

9 Kitchen sink mixer with cast swivel spout (1000 grams) 3.00 Each 1248.00 374400

10 Wall mixer with elegant knob (1400 grams) 3.00 Each 1787.00 536100

11 Hand shower set with flexible extension pipe 3.00 Each 754.00 226200

12 Bottle trap set with extension pipes each 3.00 Each 473.00 141900

13 Toilet paper holder 3.00 Each 248.00 74400

14 Soap dish plate 3.00 Each 163.00 48900

15 Shower rose (revolving type) (150mm) 15.00 Each 269.00 403500

16 Towel rail (600mm long x 20mm dia) 15.00 Each 338.00 507000

17 Towel ring (150 mm dia) 3.00 Each 254.00 76200

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 3.00 Each 1764.00 529200

19 Health foscet (hand jet) with flexible connection pipe (for WC) 3.00 Set 774.00 232200

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 3.00 Set 577.00 173100

86 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 7.00 Each 51.00 35700

87 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 6.00 Each 436.00 261600

2 32 mm nominal bore. 6.00 Each 510.00 306000

88 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 2.00 Each 7564.00 1512800

89 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 5000.00 Liter 7.30 3650000

90 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 10.00 Each 413.00 413000

91 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 Each 4644.00 1857600

92 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 Each 8013.00 3205200

93 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3.00 Each 11021.00 3306300

94 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3.00 Each 4356.00 1306800

95 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 2.00 Each 4133.00 826600

96 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 50.00 Met. 262.00 1310000

97 1 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 32.00 Cum 26.50 84800

98 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 48.50 Cum 3384.00 16412400

99 7 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 102.40 Sqm 62.50 640000

100 1 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 500.00 Sqm 7.20 360000

101 2 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 46.00 Sqm 228.00 1048800

2 1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 50.00 Sqm 297.00 1485000

2 1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 25.00 Sqm 235.00 587500

2 1 8 Beams, lintels, cantilevers & walls. 40.00 Sqm 202.00 808000

102 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 67.90 Sqm 2005.00 13614000

103 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 27.20 Sqm 1780.00 4841600

104 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 380.15 Kg 67.50 2566000

105 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 66.20 Sqm 658.00 4356000

106 14 5 1 White washing with lime to give an even shade. On new work (Three or more coats) 150.22 Sqm 9.40 141200

107 14 7 1 Colour washing such as green, blue or buff with lime to give an even shade. On new work (two or more coats) including a base coat of white washing 98.20 Sqm 12.00 117800

108 14 9 1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) 180.90 Sqm 38.00 687400

109 14 10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats) 509.40 Sqm 44.50 2266800

110 14 12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 490.40 Sqm 23.00 1127900

111 14 13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 325.00 Sqm 94.50 3071300

112 14 14 1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) 1220.25 Sqm 41.00 5003000

113 14 16 1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 250.10 Sqm 74.50 1863200

114 14 22 1 Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint 40.20 Sqm 55.00 221100

Total 599971100

Say Rs. 60.00 Lakhs

RUPEES EIGHTY LAKHS ONLY

NIT SCHEDULE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER P.W.D. SUB DIVISION NO. 2, DURG (C.G.)

NIT SCHEDULE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

P.A.C. Rs. 50.00 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 400.00 Cum 185.00 7400000 8.00 400.00

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 23.75 Sqm 2016.00 4788000 0.40 19.79

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 35.83 Each 284.00 1017700 0.60 29.86

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 100.00 Cum 65.00 650000 1.67 83.33

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 337.58 Cum 371.00 12524300 5.63 281.32

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 6.67 Each 1053.00 702000 0.11 5.56

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 29.82 Cum 3263.00 9729200 0.50 24.85

8 7 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 33.50 Sqm 382.00 1279700 0.56 27.92

7 11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 14.17 Sqm 394.00 558200 0.24 11.81

9 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 337.88 Sqm 436.00 14731400 5.63 281.56

10 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 52.50 Each 100.00 525000 0.88 43.75

11 2 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 87.58 Sqm 139.00 1217400 1.46 72.99

12 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 14.17 Each 46.50 65900 0.24 11.81

13 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 116.67 Each 33.50 390800 1.94 97.22

14 16 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 425.00 Kg 1.00 42500 7.08 354.17

15 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 69.76 Cum 263.00 1834600 1.16 58.13

16 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 81.79 Sqm 13.50 110400 1.36 68.16

17 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 850.42 Sqm 22.50 1913400 14.17 708.68

18 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 1408.58 Sqm 11.00 1549400 23.48 1173.82

19 16 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 15.11 Sqm 768.00 1160300 0.25 12.59

20 16 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 14.17 Each 16.50 23400 0.24 11.81

21 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 58.46 Cum 2970.00 17362100 0.97 48.72

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 20.15 Cum 2659.00 5357900 0.34 16.79

22 3 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 10.75 Cum 4163.00 4475200 0.18 8.96

23 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 15.50 Cum 3552.00 5505600 0.26 12.92

24 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 1166.67 Kg 54.50 6358300 19.44 972.22

25 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 41.67 Each 68.50 285400 0.69 34.72

26 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 34.83 Cum 3817.00 13295900 0.58 29.03

27 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 16.67 Each 1776.00 2960000 0.28 13.89

28 2 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 33.75 Sqm 294.00 992300 0.56 28.13

29 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 66.67 Each 154.00 1026700 1.11 55.56

30 8 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 30.17 Sqm 1126.00 3396800 0.50 25.14

31 8 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 22.50 Each 256.00 576000 0.38 18.75

32 8 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 14.17 Each 496.00 702700 0.24 11.81

33 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 14.17 Each 53.50 75800 0.24 11.81

34 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 25.83 Each 34.50 89100 0.43 21.53

35 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 30.00 Each 51.00 153000 0.50 25.00

36 8 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 16.67 Each 13.00 21700 0.28 13.89

37 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 5.17 Sqm 3330.00 1720500 0.09 4.31

38 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 908.33 Kg 73.50 6676300 15.14 756.94

39 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 1733.67 Kg 68.00 11788900 28.89 1444.72

40 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 200.67 Sqm 569.00 11417900 3.34 167.22

41 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 342.58 Sqm 331.00 11339500 5.71 285.49

42 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 1008.33 Kg 61.50 6201300 16.81 840.28

43 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 337.50 Kg 331.00 11171300 5.63 281.25

44 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 337.50 Kg 338.00 11407500 5.63 281.25

45 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 1.08 Cum 61051 6613900 0.02 0.90

46 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 65.33 Sqm 708.00 4625600 1.09 54.44

47 10 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 116.83 Sqm 810.00 9463500 1.95 97.36

48 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 38.75 Sqm 347.00 1344600 0.65 32.29

49 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 40.67 Sqm 610.00 2480700 0.68 33.89

50 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 43.67 Sqm 563.00 2458400 0.73 36.39

51 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 56.83 Met. 346.00 1966400 0.95 47.36

52 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 75.67 Sqm 2399.00 18152400 1.26 63.06

53 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 258.33 Sqm 87.00 2247500 4.31 215.28

54 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 433.33 Sqm 91.50 3965000 7.22 361.11

55 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 241.67 Sqm 96.50 2332100 4.03 201.39

56 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 312.93 Sqm 107.00 3348400 5.22 260.78

57 11 5 4 Neat Cement punning. 42.08 Sqm 33.00 138900 0.70 35.07

58 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 100.75 Sqm 254.00 2559100 1.68 83.96

59 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 400.50 Sqm 587.00 23509400 6.68 333.75

60 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 271.25 Sqm 692.00 18770500 4.52 226.04

61 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 850.00 Kg 75.00 6375000 14.17 708.33

63 12 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 15.50 Sqm 1576.00 2442800 0.26 12.92

64 12 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 195.823 Sqm 1082.00 21188000 3.26 163.19

65 12 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 17.17 Sqm 1497.00 2569900 0.29 14.31

66 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 100.33 Sqm 280.00 2809300 1.67 83.61

67 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 14.17 Each 2882.00 4082800 0.24 11.81

68 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 233.50 Sqm 132.00 3082200 3.89 194.58

69 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 14.17 Each 729.00 1032800 0.24 11.81

70 17 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 36.83 Sqm 524.00 1930100 0.61 30.69

71 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 20.83 Each 2459.00 5122900 0.35 17.36

72 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 5.83 Each 2014.00 1174800 0.10 4.86

73 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 1.67 no. 3876.00 646000 0.03 1.39

74 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 12.50 Each 1430.00 1787500 0.21 10.42

75 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 125.00 Met. 182.00 2275000 2.08 104.17

76 18 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 4.30 Each 254.00 109200 0.07 3.58

77 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 41.67 Each 113.00 470800 0.69 34.72

2.1 Double "Y" with or without door 75 mm 16.67 Each 129.00 215000 0.28 13.89

4.1 Access door cap 75 mm 12.50 Each 49.50 61900 0.21 10.42

7 Multi floor trap 110 4.17 Each 122.00 50800 0.07 3.47

8 Plain reducing Tee 110x75mm 4.17 Each 129.00 53800 0.07 3.47

78 18 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 16.67 Each 57.00 95000 0.28 13.89

79 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 166.67 Met. 110.00 1833300 2.78 138.89

2 20 mm nominal outer dia .Pipes. 233.33 Met. 151.00 3523300 3.89 194.44

3 25 mm nominal outer dia .Pipes. 100.00 Met. 199.00 1990000 1.67 83.33

80 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 41.67 Met. 188.00 783300 0.69 34.72

2 20 mm dia nominal bore 50.00 Met. 221.00 1105000 0.83 41.67

3 25 mm dia nominal bore 68.33 Met. 297.00 2029500 1.14 56.94

81 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 100.33 Met. 131.00 1314400 1.67 83.61

2 20 mm dia. nominal bore 41.67 Met. 159.00 662500 0.69 34.72

82 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 8.33 Each 85.00 70800 0.14 6.94

2 20 mm nominal bore 8.33 Each 98.00 81700 0.14 6.94

3 25 mm nominal bore 6.67 Each 117.00 78000 0.11 5.56

83 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 16.67 Each 186.00 310000 0.28 13.89

2 20 mm nominal bore. 5.83 Each 199.00 116100 0.10 4.86

3 25 mm nominal bore. 5.83 Each 218.00 127200 0.10 4.86

84 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 58.33 Each 185.00 1079200 0.97 48.61

85 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 16.67 Each 382.00 636700 0.28 13.89

2 Long nose bib cock (500 grams) 25.00 Each 455.00 1137500 0.42 20.83

3 Long body bib cock (500 grams) 41.67 Each 426.00 1775000 0.69 34.72

4 Piller Cock (400 grams) 16.67 Each 398.00 663300 0.28 13.89

5 Two way bib cock (800 grams) 5.83 Each 708.00 413000 0.10 4.86

6 Stop cock (concealed) (600 grams) 5.83 Each 494.00 288200 0.10 4.86

7 Angle valve for basin mixer and geyser points (450 grams) 2.50 Each 382.00 95500 0.04 2.08

8 Basin mixer pillar tap with spout (1000 grams) 2.50 Each 1248.00 312000 0.04 2.08

9 Kitchen sink mixer with cast swivel spout (1000 grams) 2.50 Each 1248.00 312000 0.04 2.08

10 Wall mixer with elegant knob (1400 grams) 2.50 Each 1787.00 446800 0.04 2.08

11 Hand shower set with flexible extension pipe 2.50 Each 754.00 188500 0.04 2.08

12 Bottle trap set with extension pipes each 2.50 Each 473.00 118300 0.04 2.08

13 Toilet paper holder 2.50 Each 248.00 62000 0.04 2.08

14 Soap dish plate 2.50 Each 163.00 40800 0.04 2.08

15 Shower rose (revolving type) (150mm) 12.50 Each 269.00 336300 0.21 10.42

16 Towel rail (600mm long x 20mm dia) 12.50 Each 338.00 422500 0.21 10.42

17 Towel ring (150 mm dia) 2.50 Each 254.00 63500 0.04 2.08

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 2.50 Each 1764.00 441000 0.04 2.08

19 Health foscet (hand jet) with flexible connection pipe (for WC) 2.50 Set 774.00 193500 0.04 2.08

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 2.50 Set 577.00 144300 0.04 2.08

86 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 5.83 Each 51.00 29800 0.10 4.86

87 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 5.00 Each 436.00 218000 0.08 4.17

2 32 mm nominal bore. 5.00 Each 510.00 255000 0.08 4.17

88 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 1.67 Each 7564.00 1260700 0.03 1.39

89 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 4166.67 Liter 7.30 3041700 69.44 3472.22

90 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 8.33 Each 413.00 344200 0.14 6.94

91 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3.33 Each 4644.00 1548000 0.06 2.78

92 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 3.33 Each 8013.00 2671000 0.06 2.78

93 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 2.50 Each 11021.00 2755300 0.04 2.08

94 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 2.50 Each 4356.00 1089000 0.04 2.08

95 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.67 Each 4133.00 688800 0.03 1.39

96 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 41.67 Met. 262.00 1091700 0.69 34.72

97 1 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 26.67 Cum 26.50 70700 0.44 22.22

98 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 40.42 Cum 3384.00 13677000 0.67 33.68

99 7 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 85.33 Sqm 62.50 533300 1.42 71.11

100 1 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 416.67 Sqm 7.20 300000 6.94 347.22

101 2 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 38.33 Sqm 228.00 874000 0.64 31.94

2 1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 41.67 Sqm 297.00 1237500 0.69 34.72

2 1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 20.83 Sqm 235.00 489600 0.35 17.36

2 1 8 Beams, lintels, cantilevers & walls. 33.33 Sqm 202.00 673300 0.56 27.78

102 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 56.58 Sqm 2005.00 11345000 0.94 47.15

103 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 22.67 Sqm 1780.00 4034700 0.38 18.89

104 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 316.79 Kg 67.50 2138300 5.28 263.99

105 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 55.17 Sqm 658.00 3630000 0.92 45.97

106 14 5 1 White washing with lime to give an even shade. On new work (Three or more coats) 125.18 Sqm 9.40 117700 2.09 104.32

107 14 7 1 Colour washing such as green, blue or buff with lime to give an even shade. On new work (two or more coats) including a base coat of white washing 81.83 Sqm 12.00 98200 1.36 68.19

108 14 9 1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) 150.75 Sqm 38.00 572900 2.51 125.63

109 14 10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats) 424.50 Sqm 44.50 1889000 7.08 353.75

110 14 12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 408.67 Sqm 23.00 939900 6.81 340.56

111 14 13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 270.83 Sqm 94.50 2559400 4.51 225.69

112 14 14 1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) 1016.88 Sqm 41.00 4169200 16.95 847.40

113 14 16 1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 208.42 Sqm 74.50 1552700 3.47 173.68

114 14 22 1 Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint 33.50 Sqm 55.00 184300 0.56 27.92

Total 499976800

Say Rs. 50.00 Lakhs

RUPEES FIFTY LAKHS ONLY

GOVT. OF CHHATTISGARH

DETAILED ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

Estimated Cost - 12.50 Lacs.

SUB DIVISION CHHUIKHADAN

GENERAL ABSTRACT

Estimate No:- Estimated Cost - 12.50 Lacs

Name Of Work :- DETAILED ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

S. No. Sub Head Quantity Rate Unit Amount

1 DETAILED ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.) As per Detailed Attached 1250073.00

Grand Total 1250073.00

Say Rs. In Lacs 12.50

DETAILED ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

Hkouksa dk uke %&

1 'kkldh; egkfo|ky; Hkou NqbZ[knku] 'kkldh; egkfo|ky; Hkou x.MbZ] 'kkldh; egkfo|ky; Hkou lkYgsokjk] izh&eSVªhd vkfnoklh gkLVy Hkou x.MbZ] flfoy U;k;ky Hkou NqbZ[knku] NqbZ[knku fodkl[kaM f'k{kk vf/kdkjh vkoklx`g

S. No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 100.00 Cum 185.00 1850000 2.00 80.00 1

2 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 5.94 Sqm 2016.00 1197000 0.12 4.75

3 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 8.00 Each 284.00 227200 0.16 6.40

4 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 25.00 Cum 65.00 162500 0.50 20.00

5 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 84.40 Cum 371.00 3131100 1.69 67.52

6 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 2.00 Each 1053.00 210600 0.04 1.60

7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 7.45 Cum 3263.00 2432300 0.15 5.96

8 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 8.38 Sqm 382.00 319900 0.17 6.70

11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 3.54 Sqm 394.00 139500 0.07 2.83

9 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 84.47 Sqm 436.00 3682800 1.69 67.58

10 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 13.00 Each 100.00 130000 0.26 10.40

11 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 22.00 Sqm 139.00 305800 0.44 17.60

12 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 3.00 Each 46.50 14000 0.06 2.40

13 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 25.00 Each 33.50 83800 0.50 20.00

14 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 106.25 Kg 1.00 10600 2.13 85.00

15 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 17.44 Cum 263.00 458700 0.35 13.95

16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 20.45 Sqm 13.50 27600 0.41 16.36

17 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 212.60 Sqm 22.50 478400 4.25 170.08

18 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 352.15 Sqm 11.00 387400 7.04 281.72

19 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 3.78 Sqm 768.00 290100 0.08 3.02

20 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 4.00 Each 16.50 6600 0.08 3.20

21 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 14.61 Cum 2970.00 4340500 0.29 11.69

1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 5.04 Cum 2659.00 1339500 0.10 4.03

22 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 2.50 Cum 4163.00 1040800 0.05 2.00

23 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 3.88 Cum 3552.00 1376400 0.08 3.10

24 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 291.67 Kg 54.50 1589600 5.83 233.33

25 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 8.00 Each 68.50 54800 0.16 6.40

26 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8.71 Cum 3817.00 3324000 0.17 6.97

27 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 4.00 Each 1776.00 710400 0.08 3.20

28 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 8.44 Sqm 294.00 248100 0.17 6.75

29 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 12.00 Each 154.00 184800 0.24 9.60

30 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 7.54 Sqm 1126.00 849200 0.15 6.03

31 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 5.00 Each 256.00 128000 0.10 4.00

32 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 4.00 Each 496.00 198400 0.08 3.20

33 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 3.00 Each 53.50 16100 0.06 2.40

34 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 6.00 Each 34.50 20700 0.12 4.80

35 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 8.00 Each 51.00 40800 0.16 6.40

36 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 4.00 Each 13.00 5200 0.08 3.20

37 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 1.29 Sqm 3330.00 430100 0.03 1.03

38 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 227.08 Kg 73.50 1669100 4.54 181.67

39 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 433.42 Kg 68.00 2947200 8.67 346.73

40 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 50.17 Sqm 569.00 2854500 1.00 40.13

41 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 85.65 Sqm 331.00 2834900 1.71 68.52

42 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 252.08 Kg 61.50 1550300 5.04 201.67

43 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 84.38 Kg 331.00 2792800 1.69 67.50

44 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 84.38 Kg 338.00 2851900 1.69 67.50

45 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.27 Cum 61051 1653500 0.01 0.22

46 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 16.33 Sqm 708.00 1156400 0.33 13.07

47 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 29.21 Sqm 810.00 2365900 0.58 23.37

1 3 0.63 mm thick sheet (weight 5.70 kg/m2) 75.19 Sqm 678.00 5097700 1.50 60.15

48 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 9.69 Sqm 347.00 336200 0.19 7.75

49 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 10.17 Sqm 610.00 620200 0.20 8.13

50 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 10.92 Sqm 563.00 614600 0.22 8.73

51 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 14.21 Met. 346.00 491600 0.28 11.37

52 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 14.50 Sqm 2399.00 3478600 0.29 11.60

53 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 64.58 Sqm 87.00 561900 1.29 51.67

54 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 108.33 Sqm 91.50 991300 2.17 86.67

55 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 60.42 Sqm 96.50 583000 1.21 48.33

56 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 78.23 Sqm 107.00 837100 1.56 62.59

57 5 4 Neat Cement punning. 10.52 Sqm 33.00 34700 0.21 8.42

58 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 25.19 Sqm 254.00 639800 0.50 20.15

59 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 100.13 Sqm 587.00 5877300 2.00 80.10

60 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 67.81 Sqm 692.00 4692600 1.36 54.25

61 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 212.50 Kg 75.00 1593800 4.25 170.00

63 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 3.88 Sqm 1576.00 610700 0.08 3.10

64 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 48.956 Sqm 1082.00 5297000 0.98 39.16

65 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 4.29 Sqm 1497.00 642500 0.09 3.43

66 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 25.08 Sqm 280.00 702300 0.50 20.07

67 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 3.00 Each 2882.00 864600 0.06 2.40

68 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 58.38 Sqm 132.00 770600 1.17 46.70

69 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 4.00 Each 729.00 291600 0.08 3.20

70 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 9.21 Sqm 524.00 482500 0.18 7.37

71 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 5.00 Each 2459.00 1229500 0.10 4.00

72 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 2.00 Each 2014.00 402800 0.04 1.60

73 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 0.42 no. 3876.00 161500 0.01 0.33

74 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 3.00 Each 1430.00 429000 0.06 2.40

75 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 31.25 Met. 182.00 568800 0.63 25.00

76 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 1.00 Each 254.00 25400 0.02 0.80

77 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 8.00 Each 113.00 90400 0.16 6.40

2.1 Double "Y" with or without door 75 mm 4.00 Each 129.00 51600 0.08 3.20

4.1 Access door cap 75 mm 3.00 Each 49.50 14900 0.06 2.40

5 "P" trap 110mmx110mm long 2.00 Each 227.00 45400 0.04 1.60

6 Nahani trap 110x75mm 6.00 Each 90.50 54300 0.12 4.80

7 Multi floor trap 110 1.00 Each 122.00 12200 0.02 0.80

8 Plain reducing Tee 110x75mm 1.00 Each 129.00 12900 0.02 0.80

78 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 4.00 Each 57.00 22800 0.08 3.20

79 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 41.67 Met. 110.00 458300 0.83 33.33

2 20 mm nominal outer dia .Pipes. 58.33 Met. 151.00 880800 1.17 46.67

3 25 mm nominal outer dia .Pipes. 25.00 Met. 199.00 497500 0.50 20.00

80 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 10.42 Met. 188.00 195800 0.21 8.33

2 20 mm dia nominal bore 12.50 Met. 221.00 276300 0.25 10.00

3 25 mm dia nominal bore 17.08 Met. 297.00 507400 0.34 13.67

81 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 25.08 Met. 131.00 328600 0.50 20.07

2 20 mm dia. nominal bore 10.42 Met. 159.00 165600 0.21 8.33

82 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 2.00 Each 85.00 17000 0.04 1.60

2 20 mm nominal bore 2.00 Each 98.00 19600 0.04 1.60

3 25 mm nominal bore 2.00 Each 117.00 23400 0.04 1.60

83 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 4.00 Each 186.00 74400 0.08 3.20

2 20 mm nominal bore. 2.00 Each 199.00 39800 0.04 1.60

3 25 mm nominal bore. 2.00 Each 218.00 43600 0.04 1.60

84 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 12.00 Each 185.00 222000 0.24 9.60

85 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 4.00 Each 382.00 152800 0.08 3.20

2 Long nose bib cock (500 grams) 4.00 Each 455.00 182000 0.08 3.20

3 Long body bib cock (500 grams) 8.00 Each 426.00 340800 0.16 6.40

4 Piller Cock (400 grams) 4.00 Each 398.00 159200 0.08 3.20

5 Two way bib cock (800 grams) 1.00 Each 708.00 70800 0.02 0.80

6 Stop cock (concealed) (600 grams) 1.00 Each 494.00 49400 0.02 0.80

7 Angle valve for basin mixer and geyser points (450 grams) 1.00 Each 382.00 38200 0.02 0.80

8 Basin mixer pillar tap with spout (1000 grams) 1.00 Each 1248.00 124800 0.02 0.80

9 Kitchen sink mixer with cast swivel spout (1000 grams) 1.00 Each 1248.00 124800 0.02 0.80

10 Wall mixer with elegant knob (1400 grams) 1.00 Each 1787.00 178700 0.02 0.80

11 Hand shower set with flexible extension pipe 1.00 Each 754.00 75400 0.02 0.80

12 Bottle trap set with extension pipes each 1.00 Each 473.00 47300 0.02 0.80

13 Toilet paper holder 1.00 Each 248.00 24800 0.02 0.80

14 Soap dish plate 1.00 Each 163.00 16300 0.02 0.80

15 Shower rose (revolving type) (150mm) 3.00 Each 269.00 80700 0.06 2.40

16 Towel rail (600mm long x 20mm dia) 3.00 Each 338.00 101400 0.06 2.40

17 Towel ring (150 mm dia) 1.00 Each 254.00 25400 0.02 0.80

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 1.00 Each 1764.00 176400 0.02 0.80

19 Health foscet (hand jet) with flexible connection pipe (for WC) 1.00 Set 774.00 77400 0.02 0.80

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 1.00 Set 577.00 57700 0.02 0.80

86 15 Providing and fixing stainless steel drain jali of approved make/quality. 1.00 Each 51.00 5100 0.02 0.80

87 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 1.00 Each 436.00 43600 0.02 0.80

2 32 mm nominal bore. 1.00 Each 510.00 51000 0.02 0.80

88 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 10.00 Each 754.00 754000 0.20 8.00

89 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1041.67 Liter 7.30 760400 20.83 833.33

90 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 2.00 Each 413.00 82600 0.04 1.60

91 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4644.00 464400 0.02 0.80

92 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 8013.00 801300 0.02 0.80

93 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 11021.00 1102100 0.02 0.80

94 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4356.00 435600 0.02 0.80

95 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4133.00 413300 0.02 0.80

96 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 10.42 Met. 262.00 272900 0.21 8.33

97 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 6.67 Cum 26.50 17700 0.13 5.33

98 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 10.10 Cum 3384.00 3419300 0.20 8.08

99 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 21.33 Sqm 62.50 133300 0.43 17.07

100 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 104.17 Sqm 7.20 75000 2.08 83.33

101 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 9.58 Sqm 228.00 218500 0.19 7.67

1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 10.42 Sqm 297.00 309400 0.21 8.33

1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 5.21 Sqm 235.00 122400 0.10 4.17

1 8 Beams, lintels, cantilevers & walls. 8.33 Sqm 202.00 168300 0.17 6.67

102 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 13.95 Sqm 2005.00 2797000 0.28 11.16

103 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 5.67 Sqm 1780.00 1008700 0.11 4.53

104 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 79.20 Kg 67.50 534600 1.58 63.36

105 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 13.79 Sqm 658.00 907500 0.28 11.03

106 14 54.1 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete Upto 2 mm thickness to make surface even and smooth in line and level. 86.50 sqm 82.00 709300 1.73 69.20

107 14 53 White washing/ Colour washing with lime to give an even Sqm shade in Three or more Coats for New surface as per relevant IS code 6278:1971 Consumption of lime 3.50kg /10 Sqm with all tools tackles and labour etc. complete for the work. 35.70 sqm 14.00 50000 0.71 28.56

108 14 62 Providing and applying Acrylic washable Distemper or lite cconomy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applicd @ 1.25 Kg/ 10Sqm as per relevant L.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 67.50 sqm 64.00 432000 1.35 54.00

109 14 72 Providing and applying Glossy finish Enamel paint mimimum 2 Coats in al surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel Dulux Promise Premium Enamel Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 151.38 sqm 120.00 1816600 3.03 121.10

Total 125007300

Say Rs. 12.50 Lakhs

NIT SCHEDULE FOR M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

Hkouksa dk uke %&

1 'kkldh; egkfo|ky; Hkou NqbZ[knku] 'kkldh; egkfo|ky; Hkou x.MbZ] 'kkldh; egkfo|ky; Hkou lkYgsokjk] izh&eSVªhd vkfnoklh gkLVy Hkou x.MbZ] flfoy U;k;ky Hkou NqbZ[knku] NqbZ[knku fodkl[kaM f'k{kk vf/kdkjh vkoklx`g

Building SOR wet 01/01/2015 P.A.C. Rs. 12.50 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 100.00 Cum 185.00 1850000 2.50 31.25

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 5.94 Sqm 2016.00 1197000 0.15 1.86

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 8.00 Each 284.00 227200 0.20 2.50

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 25.00 Cum 65.00 162500 0.63 7.81

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 84.40 Cum 371.00 3131100 2.11 26.37

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 2.00 Each 1053.00 210600 0.05 0.63

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 7.45 Cum 3263.00 2432300 0.19 2.33

8 7 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 8.38 Sqm 382.00 319900 0.21 2.62

7 11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 3.54 Sqm 394.00 139500 0.09 1.11

9 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 84.47 Sqm 436.00 3682800 2.11 26.40

10 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 13.00 Each 100.00 130000 0.33 4.06

11 2 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 22.00 Sqm 139.00 305800 0.55 6.88

12 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 3.00 Each 46.50 14000 0.08 0.94

13 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 25.00 Each 33.50 83800 0.63 7.81

14 16 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 106.25 Kg 1.00 10600 2.66 33.20

15 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 17.44 Cum 263.00 458700 0.44 5.45

16 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 20.45 Sqm 13.50 27600 0.51 6.39

17 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 212.60 Sqm 22.50 478400 5.32 66.44

18 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 352.15 Sqm 11.00 387400 8.80 110.05

19 16 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 3.78 Sqm 768.00 290100 0.09 1.18

20 16 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 4.00 Each 16.50 6600 0.10 1.25

21 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 14.61 Cum 2970.00 4340500 0.37 4.57

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 5.04 Cum 2659.00 1339500 0.13 1.57

22 3 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 2.50 Cum 4163.00 1040800 0.06 0.78

23 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 3.88 Cum 3552.00 1376400 0.10 1.21

24 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 291.67 Kg 54.50 1589600 7.29 91.15

25 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 8.00 Each 68.50 54800 0.20 2.50

26 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8.71 Cum 3817.00 3324000 0.22 2.72

27 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 4.00 Each 1776.00 710400 0.10 1.25

28 2 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 8.44 Sqm 294.00 248100 0.21 2.64

29 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 12.00 Each 154.00 184800 0.30 3.75

30 8 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 7.54 Sqm 1126.00 849200 0.19 2.36

31 8 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 5.00 Each 256.00 128000 0.13 1.56

32 8 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 4.00 Each 496.00 198400 0.10 1.25

33 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 3.00 Each 53.50 16100 0.08 0.94

34 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 6.00 Each 34.50 20700 0.15 1.88

35 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 8.00 Each 51.00 40800 0.20 2.50

36 8 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 4.00 Each 13.00 5200 0.10 1.25

37 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 1.29 Sqm 3330.00 430100 0.03 0.40

38 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 227.08 Kg 73.50 1669100 5.68 70.96

39 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 433.42 Kg 68.00 2947200 10.84 135.44

40 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 50.17 Sqm 569.00 2854500 1.25 15.68

41 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 85.65 Sqm 331.00 2834900 2.14 26.76

42 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 252.08 Kg 61.50 1550300 6.30 78.78

43 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 84.38 Kg 331.00 2792800 2.11 26.37

44 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 84.38 Kg 338.00 2851900 2.11 26.37

45 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.27 Cum 61051 1653500 0.01 0.08

46 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 16.33 Sqm 708.00 1156400 0.41 5.10

47 10 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 29.21 Sqm 810.00 2365900 0.73 9.13

48 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 9.69 Sqm 347.00 336200 0.24 3.03

49 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 10.17 Sqm 610.00 620200 0.25 3.18

50 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 10.92 Sqm 563.00 614600 0.27 3.41

51 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 14.21 Met. 346.00 491600 0.36 4.44

52 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 14.50 Sqm 2399.00 3478600 0.36 4.53

53 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 64.58 Sqm 87.00 561900 1.61 20.18

54 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 108.33 Sqm 91.50 991300 2.71 33.85

55 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 60.42 Sqm 96.50 583000 1.51 18.88

56 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 78.23 Sqm 107.00 837100 1.96 24.45

57 11 5 4 Neat Cement punning. 10.52 Sqm 33.00 34700 0.26 3.29

58 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 25.19 Sqm 254.00 639800 0.63 7.87

59 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 100.13 Sqm 587.00 5877300 2.50 31.29

60 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 67.81 Sqm 692.00 4692600 1.70 21.19

61 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 212.50 Kg 75.00 1593800 5.31 66.41

63 12 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 3.88 Sqm 1576.00 610700 0.10 1.21

64 12 79 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm (9 to 10 mm thickness ) 48.956 Sqm 1082.00 5297000 1.22 15.30

65 12 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 4.29 Sqm 1497.00 642500 0.11 1.34

66 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 25.08 Sqm 280.00 702300 0.63 7.84

67 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 3.00 Each 2882.00 864600 0.08 0.94

68 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 58.38 Sqm 132.00 770600 1.46 18.24

69 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 4.00 Each 729.00 291600 0.10 1.25

70 17 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 9.21 Sqm 524.00 482500 0.23 2.88

71 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 5.00 Each 2459.00 1229500 0.13 1.56

72 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 2.00 Each 2014.00 402800 0.05 0.63

73 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 0.42 no. 3876.00 161500 0.01 0.13

74 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 3.00 Each 1430.00 429000 0.08 0.94

75 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 31.25 Met. 182.00 568800 0.78 9.77

76 18 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 1.00 Each 254.00 25400 0.03 0.31

77 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 8.00 Each 113.00 90400 0.20 2.50

2.1 Double "Y" with or without door 75 mm 4.00 Each 129.00 51600 0.10 1.25

4.1 Access door cap 75 mm 3.00 Each 49.50 14900 0.08 0.94

5 "P" trap 110mmx110mm long 2.00 Each 227.00 45400 0.05 0.63

6 Nahani trap 110x75mm 6.00 Each 90.50 54300 0.15 1.88

7 Multi floor trap 110 1.00 Each 122.00 12200 0.03 0.31

8 Plain reducing Tee 110x75mm 1.00 Each 129.00 12900 0.03 0.31

78 18 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 4.00 Each 57.00 22800 0.10 1.25

79 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 41.67 Met. 110.00 458300 1.04 13.02

2 20 mm nominal outer dia .Pipes. 58.33 Met. 151.00 880800 1.46 18.23

3 25 mm nominal outer dia .Pipes. 25.00 Met. 199.00 497500 0.63 7.81

80 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 10.42 Met. 188.00 195800 0.26 3.26

2 20 mm dia nominal bore 12.50 Met. 221.00 276300 0.31 3.91

3 25 mm dia nominal bore 17.08 Met. 297.00 507400 0.43 5.34

81 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 25.08 Met. 131.00 328600 0.63 7.84

2 20 mm dia. nominal bore 10.42 Met. 159.00 165600 0.26 3.26

82 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 2.00 Each 85.00 17000 0.05 0.63

2 20 mm nominal bore 2.00 Each 98.00 19600 0.05 0.63

3 25 mm nominal bore 2.00 Each 117.00 23400 0.05 0.63

83 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 4.00 Each 186.00 74400 0.10 1.25

2 20 mm nominal bore. 2.00 Each 199.00 39800 0.05 0.63

3 25 mm nominal bore. 2.00 Each 218.00 43600 0.05 0.63

84 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 12.00 Each 185.00 222000 0.30 3.75

85 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 4.00 Each 382.00 152800 0.10 1.25

2 Long nose bib cock (500 grams) 4.00 Each 455.00 182000 0.10 1.25

3 Long body bib cock (500 grams) 8.00 Each 426.00 340800 0.20 2.50

4 Piller Cock (400 grams) 4.00 Each 398.00 159200 0.10 1.25

5 Two way bib cock (800 grams) 1.00 Each 708.00 70800 0.03 0.31

6 Stop cock (concealed) (600 grams) 1.00 Each 494.00 49400 0.03 0.31

7 Angle valve for basin mixer and geyser points (450 grams) 1.00 Each 382.00 38200 0.03 0.31

8 Basin mixer pillar tap with spout (1000 grams) 1.00 Each 1248.00 124800 0.03 0.31

9 Kitchen sink mixer with cast swivel spout (1000 grams) 1.00 Each 1248.00 124800 0.03 0.31

10 Wall mixer with elegant knob (1400 grams) 1.00 Each 1787.00 178700 0.03 0.31

11 Hand shower set with flexible extension pipe 1.00 Each 754.00 75400 0.03 0.31

12 Bottle trap set with extension pipes each 1.00 Each 473.00 47300 0.03 0.31

13 Toilet paper holder 1.00 Each 248.00 24800 0.03 0.31

14 Soap dish plate 1.00 Each 163.00 16300 0.03 0.31

15 Shower rose (revolving type) (150mm) 3.00 Each 269.00 80700 0.08 0.94

16 Towel rail (600mm long x 20mm dia) 3.00 Each 338.00 101400 0.08 0.94

17 Towel ring (150 mm dia) 1.00 Each 254.00 25400 0.03 0.31

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 1.00 Each 1764.00 176400 0.03 0.31

19 Health foscet (hand jet) with flexible connection pipe (for WC) 1.00 Set 774.00 77400 0.03 0.31

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 1.00 Set 577.00 57700 0.03 0.31

86 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 1.00 Each 51.00 5100 0.03 0.31

87 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 1.00 Each 436.00 43600 0.03 0.31

2 32 mm nominal bore. 1.00 Each 510.00 51000 0.03 0.31

88 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 10.00 Each 754.00 754000 0.25 3.13

89 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1041.67 Liter 7.30 760400 26.04 325.52

90 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 2.00 Each 413.00 82600 0.05 0.63

91 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4644.00 464400 0.03 0.31

92 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 8013.00 801300 0.03 0.31

93 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 11021.00 1102100 0.03 0.31

94 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4356.00 435600 0.03 0.31

95 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4133.00 413300 0.03 0.31

96 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 10.42 Met. 262.00 272900 0.26 3.26

97 1 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 6.67 Cum 26.50 17700 0.17 2.08

98 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 10.10 Cum 3384.00 3419300 0.25 3.16

99 7 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 21.33 Sqm 62.50 133300 0.53 6.67

100 1 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 104.17 Sqm 7.20 75000 2.60 32.55

101 2 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 9.58 Sqm 228.00 218500 0.24 2.99

2 1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 10.42 Sqm 297.00 309400 0.26 3.26

2 1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 5.21 Sqm 235.00 122400 0.13 1.63

2 1 8 Beams, lintels, cantilevers & walls. 8.33 Sqm 202.00 168300 0.21 2.60

102 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 13.95 Sqm 2005.00 2797000 0.35 4.36 12.50 Lakhs

103 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 5.67 Sqm 1780.00 1008700 0.14 1.77

104 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 79.20 Kg 67.50 534600 1.98 24.75

105 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 13.79 Sqm 658.00 907500 0.34 4.31

106 14 54 1 Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete Upto 2 mm thickness to make surface even and smooth in line and level. 86.50 sqm 82.00 709300 2.16 27.03

107 14 53 White washing/ Colour washing with lime to give an even Sqm shade in Three or more Coats for New surface as per relevant IS code 6278:1971 Consumption of lime 3.50kg /10 Sqm with all tools tackles and labour etc. complete for the work. 35.70 sqm 14.00 50000 0.89 11.16

108 14 62 Providing and applying Acrylic washable Distemper or lite cconomy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applicd @ 1.25 Kg/ 10Sqm as per relevant L.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 67.50 sqm 64.00 432000 1.69 21.09

109 14 72 Providing and applying Glossy finish Enamel paint mimimum 2 Coats in al surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel Dulux Promise Premium Enamel Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 151.38 sqm 120.00 1816600 3.78 47.31

Total 125007300

Say Rs. 12.50 Lakhs

NIT SCHEDULE FOR M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

Hkouksa dk uke %&

1 'kkldh; egkfo|ky; Hkou NqbZ[knku] 'kkldh; egkfo|ky; Hkou x.MbZ] 'kkldh; egkfo|ky; Hkou lkYgsokjk] izh&eSVªhd vkfnoklh gkLVy Hkou x.MbZ] flfoy U;k;ky Hkou NqbZ[knku] NqbZ[knku fodkl[kaM f'k{kk vf/kdkjh vkoklx`g

Building SOR wet 01/01/2015 P.A.C. Rs. 12.50 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 100.00 Cum 185.00 1850000 2.50 31.25

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 5.94 Sqm 2016.00 1197000 0.15 1.86

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 8.00 Each 284.00 227200 0.20 2.50

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 25.00 Cum 65.00 162500 0.63 7.81

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 84.40 Cum 371.00 3131100 2.11 26.37

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 2.00 Each 1053.00 210600 0.05 0.63

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 7.45 Cum 3263.00 2432300 0.19 2.33

8 7 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 8.38 Sqm 382.00 319900 0.21 2.62

7 11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 3.54 Sqm 394.00 139500 0.09 1.11

9 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 84.47 Sqm 436.00 3682800 2.11 26.40

10 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 13.00 Each 100.00 130000 0.33 4.06

11 2 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 22.00 Sqm 139.00 305800 0.55 6.88

12 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 3.00 Each 46.50 14000 0.08 0.94

13 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 25.00 Each 33.50 83800 0.63 7.81

14 16 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 106.25 Kg 1.00 10600 2.66 33.20

15 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 17.44 Cum 263.00 458700 0.44 5.45

16 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 20.45 Sqm 13.50 27600 0.51 6.39

17 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 212.60 Sqm 22.50 478400 5.32 66.44

18 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 352.15 Sqm 11.00 387400 8.80 110.05

19 16 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 3.78 Sqm 768.00 290100 0.09 1.18

20 16 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 4.00 Each 16.50 6600 0.10 1.25

21 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 14.61 Cum 2970.00 4340500 0.37 4.57

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 5.04 Cum 2659.00 1339500 0.13 1.57

22 3 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 2.50 Cum 4163.00 1040800 0.06 0.78

23 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 3.88 Cum 3552.00 1376400 0.10 1.21

24 3 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 291.67 Kg 54.50 1589600 7.29 91.15

25 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 8.00 Each 68.50 54800 0.20 2.50

26 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8.71 Cum 3817.00 3324000 0.22 2.72

27 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 4.00 Each 1776.00 710400 0.10 1.25

28 2 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 8.44 Sqm 294.00 248100 0.21 2.64

29 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 12.00 Each 154.00 184800 0.30 3.75

30 8 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 7.54 Sqm 1126.00 849200 0.19 2.36

31 8 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 5.00 Each 256.00 128000 0.13 1.56

32 8 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 4.00 Each 496.00 198400 0.10 1.25

33 8 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 3.00 Each 53.50 16100 0.08 0.94

34 8 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 6.00 Each 34.50 20700 0.15 1.88

35 8 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 8.00 Each 51.00 40800 0.20 2.50

36 8 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 4.00 Each 13.00 5200 0.10 1.25

37 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 1.29 Sqm 3330.00 430100 0.03 0.40

38 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 227.08 Kg 73.50 1669100 5.68 70.96

39 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 433.42 Kg 68.00 2947200 10.84 135.44

40 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 50.17 Sqm 569.00 2854500 1.25 15.68

41 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 85.65 Sqm 331.00 2834900 2.14 26.76

42 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 252.08 Kg 61.50 1550300 6.30 78.78

43 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 84.38 Kg 331.00 2792800 2.11 26.37

44 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 84.38 Kg 338.00 2851900 2.11 26.37

45 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.27 Cum 61051 1653500 0.01 0.08

46 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 16.33 Sqm 708.00 1156400 0.41 5.10

47 10 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 29.21 Sqm 810.00 2365900 0.73 9.13

48 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 9.69 Sqm 347.00 336200 0.24 3.03

49 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 10.17 Sqm 610.00 620200 0.25 3.18

50 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 10.92 Sqm 563.00 614600 0.27 3.41

51 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 14.21 Met. 346.00 491600 0.36 4.44

52 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 14.50 Sqm 2399.00 3478600 0.36 4.53

53 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 64.58 Sqm 87.00 561900 1.61 20.18

54 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 108.33 Sqm 91.50 991300 2.71 33.85

55 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 60.42 Sqm 96.50 583000 1.51 18.88

56 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 78.23 Sqm 107.00 837100 1.96 24.45

57 11 5 4 Neat Cement punning. 10.52 Sqm 33.00 34700 0.26 3.29

58 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 25.19 Sqm 254.00 639800 0.63 7.87

59 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 100.13 Sqm 587.00 5877300 2.50 31.29

60 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 67.81 Sqm 692.00 4692600 1.70 21.19

61 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 212.50 Kg 75.00 1593800 5.31 66.41

63 12 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 3.88 Sqm 1576.00 610700 0.10 1.21

64 12 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 48.956 Sqm 1082.00 5297000 1.22 15.30

65 12 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 4.29 Sqm 1497.00 642500 0.11 1.34

66 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 25.08 Sqm 280.00 702300 0.63 7.84

67 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 3.00 Each 2882.00 864600 0.08 0.94

68 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 58.38 Sqm 132.00 770600 1.46 18.24

69 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 4.00 Each 729.00 291600 0.10 1.25

70 17 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 9.21 Sqm 524.00 482500 0.23 2.88

71 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 5.00 Each 2459.00 1229500 0.13 1.56

72 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 2.00 Each 2014.00 402800 0.05 0.63

73 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 0.42 no. 3876.00 161500 0.01 0.13

74 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 3.00 Each 1430.00 429000 0.08 0.94

75 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 31.25 Met. 182.00 568800 0.78 9.77

76 18 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 1.00 Each 254.00 25400 0.03 0.31

77 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 8.00 Each 113.00 90400 0.20 2.50

2.1 Double "Y" with or without door 75 mm 4.00 Each 129.00 51600 0.10 1.25

4.1 Access door cap 75 mm 3.00 Each 49.50 14900 0.08 0.94

5 "P" trap 110mmx110mm long 2.00 Each 227.00 45400 0.05 0.63

6 Nahani trap 110x75mm 6.00 Each 90.50 54300 0.15 1.88

7 Multi floor trap 110 1.00 Each 122.00 12200 0.03 0.31

8 Plain reducing Tee 110x75mm 1.00 Each 129.00 12900 0.03 0.31

78 18 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 4.00 Each 57.00 22800 0.10 1.25

79 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 41.67 Met. 110.00 458300 1.04 13.02

2 20 mm nominal outer dia .Pipes. 58.33 Met. 151.00 880800 1.46 18.23

3 25 mm nominal outer dia .Pipes. 25.00 Met. 199.00 497500 0.63 7.81

80 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 10.42 Met. 188.00 195800 0.26 3.26

2 20 mm dia nominal bore 12.50 Met. 221.00 276300 0.31 3.91

3 25 mm dia nominal bore 17.08 Met. 297.00 507400 0.43 5.34

81 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 25.08 Met. 131.00 328600 0.63 7.84

2 20 mm dia. nominal bore 10.42 Met. 159.00 165600 0.26 3.26

82 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 2.00 Each 85.00 17000 0.05 0.63

2 20 mm nominal bore 2.00 Each 98.00 19600 0.05 0.63

3 25 mm nominal bore 2.00 Each 117.00 23400 0.05 0.63

83 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 4.00 Each 186.00 74400 0.10 1.25

2 20 mm nominal bore. 2.00 Each 199.00 39800 0.05 0.63

3 25 mm nominal bore. 2.00 Each 218.00 43600 0.05 0.63

84 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 12.00 Each 185.00 222000 0.30 3.75

85 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 4.00 Each 382.00 152800 0.10 1.25

2 Long nose bib cock (500 grams) 4.00 Each 455.00 182000 0.10 1.25

3 Long body bib cock (500 grams) 8.00 Each 426.00 340800 0.20 2.50

4 Piller Cock (400 grams) 4.00 Each 398.00 159200 0.10 1.25

5 Two way bib cock (800 grams) 1.00 Each 708.00 70800 0.03 0.31

6 Stop cock (concealed) (600 grams) 1.00 Each 494.00 49400 0.03 0.31

7 Angle valve for basin mixer and geyser points (450 grams) 1.00 Each 382.00 38200 0.03 0.31

8 Basin mixer pillar tap with spout (1000 grams) 1.00 Each 1248.00 124800 0.03 0.31

9 Kitchen sink mixer with cast swivel spout (1000 grams) 1.00 Each 1248.00 124800 0.03 0.31

10 Wall mixer with elegant knob (1400 grams) 1.00 Each 1787.00 178700 0.03 0.31

11 Hand shower set with flexible extension pipe 1.00 Each 754.00 75400 0.03 0.31

12 Bottle trap set with extension pipes each 1.00 Each 473.00 47300 0.03 0.31

13 Toilet paper holder 1.00 Each 248.00 24800 0.03 0.31

14 Soap dish plate 1.00 Each 163.00 16300 0.03 0.31

15 Shower rose (revolving type) (150mm) 3.00 Each 269.00 80700 0.08 0.94

16 Towel rail (600mm long x 20mm dia) 3.00 Each 338.00 101400 0.08 0.94

17 Towel ring (150 mm dia) 1.00 Each 254.00 25400 0.03 0.31

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 1.00 Each 1764.00 176400 0.03 0.31

19 Health foscet (hand jet) with flexible connection pipe (for WC) 1.00 Set 774.00 77400 0.03 0.31

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 1.00 Set 577.00 57700 0.03 0.31

86 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 1.00 Each 51.00 5100 0.03 0.31

87 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 1.00 Each 436.00 43600 0.03 0.31

2 32 mm nominal bore. 1.00 Each 510.00 51000 0.03 0.31

88 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 1.00 Each 7564.00 756400 0.03 0.31

89 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1041.67 Liter 7.30 760400 26.04 325.52

90 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 2.00 Each 413.00 82600 0.05 0.63

91 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4644.00 464400 0.03 0.31

92 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 8013.00 801300 0.03 0.31

93 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 11021.00 1102100 0.03 0.31

94 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4356.00 435600 0.03 0.31

95 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4133.00 413300 0.03 0.31

96 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 10.42 Met. 262.00 272900 0.26 3.26

97 1 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 6.67 Cum 26.50 17700 0.17 2.08

98 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 10.10 Cum 3384.00 3419300 0.25 3.16

99 7 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 21.33 Sqm 62.50 133300 0.53 6.67

100 1 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 104.17 Sqm 7.20 75000 2.60 32.55

101 2 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 9.58 Sqm 228.00 218500 0.24 2.99

2 1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 10.42 Sqm 297.00 309400 0.26 3.26

2 1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 5.21 Sqm 235.00 122400 0.13 1.63

2 1 8 Beams, lintels, cantilevers & walls. 8.33 Sqm 202.00 168300 0.21 2.60

102 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 13.95 Sqm 2005.00 2797000 0.35 4.36 12.50 Lakhs

103 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 5.67 Sqm 1780.00 1008700 0.14 1.77

104 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 79.20 Kg 67.50 534600 1.98 24.75

105 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 13.79 Sqm 658.00 907500 0.34 4.31

106 14 5 1 White washing with lime to give an even shade. On new work (Three or more coats) 31.30 Sqm 9.40 29400 0.78 9.78

107 14 7 1 Colour washing such as green, blue or buff with lime to give an even shade. On new work (two or more coats) including a base coat of white washing 20.46 Sqm 12.00 24600 0.51 6.39

108 14 9 1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) 37.69 Sqm 38.00 143200 0.94 11.78

109 14 10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats) 106.13 Sqm 44.50 472300 2.65 33.16

110 14 12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 96.50 Sqm 23.00 222000 2.41 30.16

111 14 13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 67.71 Sqm 94.50 639800 1.69 21.16

112 14 14 1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) 254.22 Sqm 41.00 1042300 6.36 79.44

113 14 16 1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 52.10 Sqm 74.50 388200 1.30 16.28

114 14 22 1 Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint 8.38 Sqm 55.00 46100 0.21 2.62

Total 125009700

Say Rs. 12.50 Lakhs

DETAILED ESTIMATE FOR SPECIAL REPAIR & M.O.W. OF RESIDENTIAL AND NON RESIDENTIAL BUILDING UNDER SUB DIVISION CHHUIKHADAN, K.C.G. (C.G.)

Hkouksa dk uke %&

1 'kkldh; egkfo|ky; Hkou NqbZ[knku] 'kkldh; egkfo|ky; Hkou x.MbZ] 'kkldh; egkfo|ky; Hkou lkYgsokjk] izh&eSVªhd vkfnoklh gkLVy Hkou x.MbZ] flfoy U;k;ky Hkou NqbZ[knku] NqbZ[knku fodkl[kaM f'k{kk vf/kdkjh vkoklx`g

S. No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 100.00 Cum 185.00 1850000 2.00 80.00 1

2 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 5.94 Sqm 2016.00 1197000 0.12 4.75

3 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 8.00 Each 284.00 227200 0.16 6.40

4 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 25.00 Cum 65.00 162500 0.50 20.00

5 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 84.40 Cum 371.00 3131100 1.69 67.52

6 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 2.00 Each 1053.00 210600 0.04 1.60

7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 7.45 Cum 3263.00 2432300 0.15 5.96

8 11 2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 8.38 Sqm 382.00 319900 0.17 6.70

11 1 Cement Mortar 1:3 (1 cement : 3 coarse sand) 3.54 Sqm 394.00 139500 0.07 2.83

9 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 84.47 Sqm 436.00 3682800 1.69 67.58

10 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 13.00 Each 100.00 130000 0.26 10.40

11 1 1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 22.00 Sqm 139.00 305800 0.44 17.60

12 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 3.00 Each 46.50 14000 0.06 2.40

13 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 25.00 Each 33.50 83800 0.50 20.00

14 31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead. 106.25 Kg 1.00 10600 2.13 85.00

15 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 17.44 Cum 263.00 458700 0.35 13.95

16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 20.45 Sqm 13.50 27600 0.41 16.36

17 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 212.60 Sqm 22.50 478400 4.25 170.08

18 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 352.15 Sqm 11.00 387400 7.04 281.72

19 42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. 3.78 Sqm 768.00 290100 0.08 3.02

20 51 1 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 75 mm to 100mm dia pipe 4.00 Each 16.50 6600 0.08 3.20

21 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 14.61 Cum 2970.00 4340500 0.29 11.69

1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 5.04 Cum 2659.00 1339500 0.10 4.03

22 2 1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 2.50 Cum 4163.00 1040800 0.05 2.00

23 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 3.88 Cum 3552.00 1376400 0.08 3.10

24 12 1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Cold twisted bar / Hot rolled deformed steel 291.67 Kg 54.50 1589600 5.83 233.33

25 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 8.00 Each 68.50 54800 0.16 6.40

26 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8.71 Cum 3817.00 3324000 0.17 6.97

27 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 4.00 Each 1776.00 710400 0.08 3.20

28 1 13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings 8.44 Sqm 294.00 248100 0.17 6.75

29 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 12.00 Each 154.00 184800 0.24 9.60

30 22 3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). 7.54 Sqm 1126.00 849200 0.15 6.03

31 77 1 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type) 5.00 Each 256.00 128000 0.10 4.00

32 79 1 Providing and fixing S.S. finished brass sliding door bolt with necessary bolts, nuts and S.S. finished MS screws complete: 300x16 mm 4.00 Each 496.00 198400 0.08 3.20

33 100 1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 3.00 Each 53.50 16100 0.06 2.40

34 102 1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 6.00 Each 34.50 20700 0.12 4.80

35 103 1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 8.00 Each 51.00 40800 0.16 6.40

36 104 3 Providing and fixing powder coated M.S. hooks and eyes necessary iron screws: 200 mm 4.00 Each 13.00 5200 0.08 3.20

37 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 1.29 Sqm 3330.00 430100 0.03 1.03

38 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 227.08 Kg 73.50 1669100 4.54 181.67

39 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 433.42 Kg 68.00 2947200 8.67 346.73

40 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 50.17 Sqm 569.00 2854500 1.00 40.13

41 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 85.65 Sqm 331.00 2834900 1.71 68.52

42 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 252.08 Kg 61.50 1550300 5.04 201.67

43 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 84.38 Kg 331.00 2792800 1.69 67.50

44 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 84.38 Kg 338.00 2851900 1.69 67.50

45 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.27 Cum 61051 1653500 0.01 0.22

46 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 16.33 Sqm 708.00 1156400 0.33 13.07

47 1 2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 29.21 Sqm 810.00 2365900 0.58 23.37

1 3 0.63 mm thick sheet (weight 5.70 kg/m2) 75.19 Sqm 678.00 5097700 1.50 60.15

48 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 9.69 Sqm 347.00 336200 0.19 7.75

49 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 10.17 Sqm 610.00 620200 0.20 8.13

50 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 10.92 Sqm 563.00 614600 0.22 8.73

51 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 14.21 Met. 346.00 491600 0.28 11.37

52 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 14.50 Sqm 2399.00 3478600 0.29 11.60

53 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 64.58 Sqm 87.00 561900 1.29 51.67

54 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 108.33 Sqm 91.50 991300 2.17 86.67

55 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 60.42 Sqm 96.50 583000 1.21 48.33

56 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 78.23 Sqm 107.00 837100 1.56 62.59

57 5 4 Neat Cement punning. 10.52 Sqm 33.00 34700 0.21 8.42

58 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 25.19 Sqm 254.00 639800 0.50 20.15

59 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 100.13 Sqm 587.00 5877300 2.00 80.10

60 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 67.81 Sqm 692.00 4692600 1.36 54.25

61 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 212.50 Kg 75.00 1593800 4.25 170.00

63 39 5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 3.88 Sqm 1576.00 610700 0.08 3.10

64 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 48.956 Sqm 1082.00 5297000 0.98 39.16

65 38 5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble 4.29 Sqm 1497.00 642500 0.09 3.43

66 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 25.08 Sqm 280.00 702300 0.50 20.07

67 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 3.00 Each 2882.00 864600 0.06 2.40

68 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 58.38 Sqm 132.00 770600 1.17 46.70

69 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 4.00 Each 729.00 291600 0.08 3.20

70 12 1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm 9.21 Sqm 524.00 482500 0.18 7.37

71 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 5.00 Each 2459.00 1229500 0.10 4.00

72 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 2.00 Each 2014.00 402800 0.04 1.60

73 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 0.42 no. 3876.00 161500 0.01 0.33

74 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 3.00 Each 1430.00 429000 0.06 2.40

75 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 31.25 Met. 182.00 568800 0.63 25.00

76 75 1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 1.00 Each 254.00 25400 0.02 0.80

77 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 8.00 Each 113.00 90400 0.16 6.40

2.1 Double "Y" with or without door 75 mm 4.00 Each 129.00 51600 0.08 3.20

4.1 Access door cap 75 mm 3.00 Each 49.50 14900 0.06 2.40

5 "P" trap 110mmx110mm long 2.00 Each 227.00 45400 0.04 1.60

6 Nahani trap 110x75mm 6.00 Each 90.50 54300 0.12 4.80

7 Multi floor trap 110 1.00 Each 122.00 12200 0.02 0.80

8 Plain reducing Tee 110x75mm 1.00 Each 129.00 12900 0.02 0.80

78 78 1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 4.00 Each 57.00 22800 0.08 3.20

79 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 41.67 Met. 110.00 458300 0.83 33.33

2 20 mm nominal outer dia .Pipes. 58.33 Met. 151.00 880800 1.17 46.67

3 25 mm nominal outer dia .Pipes. 25.00 Met. 199.00 497500 0.50 20.00

80 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 10.42 Met. 188.00 195800 0.21 8.33

2 20 mm dia nominal bore 12.50 Met. 221.00 276300 0.25 10.00

3 25 mm dia nominal bore 17.08 Met. 297.00 507400 0.34 13.67

81 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 25.08 Met. 131.00 328600 0.50 20.07

2 20 mm dia. nominal bore 10.42 Met. 159.00 165600 0.21 8.33

82 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 2.00 Each 85.00 17000 0.04 1.60

2 20 mm nominal bore 2.00 Each 98.00 19600 0.04 1.60

3 25 mm nominal bore 2.00 Each 117.00 23400 0.04 1.60

83 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 4.00 Each 186.00 74400 0.08 3.20

2 20 mm nominal bore. 2.00 Each 199.00 39800 0.04 1.60

3 25 mm nominal bore. 2.00 Each 218.00 43600 0.04 1.60

84 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 12.00 Each 185.00 222000 0.24 9.60

85 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 4.00 Each 382.00 152800 0.08 3.20

2 Long nose bib cock (500 grams) 4.00 Each 455.00 182000 0.08 3.20

3 Long body bib cock (500 grams) 8.00 Each 426.00 340800 0.16 6.40

4 Piller Cock (400 grams) 4.00 Each 398.00 159200 0.08 3.20

5 Two way bib cock (800 grams) 1.00 Each 708.00 70800 0.02 0.80

6 Stop cock (concealed) (600 grams) 1.00 Each 494.00 49400 0.02 0.80

7 Angle valve for basin mixer and geyser points (450 grams) 1.00 Each 382.00 38200 0.02 0.80

8 Basin mixer pillar tap with spout (1000 grams) 1.00 Each 1248.00 124800 0.02 0.80

9 Kitchen sink mixer with cast swivel spout (1000 grams) 1.00 Each 1248.00 124800 0.02 0.80

10 Wall mixer with elegant knob (1400 grams) 1.00 Each 1787.00 178700 0.02 0.80

11 Hand shower set with flexible extension pipe 1.00 Each 754.00 75400 0.02 0.80

12 Bottle trap set with extension pipes each 1.00 Each 473.00 47300 0.02 0.80

13 Toilet paper holder 1.00 Each 248.00 24800 0.02 0.80

14 Soap dish plate 1.00 Each 163.00 16300 0.02 0.80

15 Shower rose (revolving type) (150mm) 3.00 Each 269.00 80700 0.06 2.40

16 Towel rail (600mm long x 20mm dia) 3.00 Each 338.00 101400 0.06 2.40

17 Towel ring (150 mm dia) 1.00 Each 254.00 25400 0.02 0.80

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 1.00 Each 1764.00 176400 0.02 0.80

19 Health foscet (hand jet) with flexible connection pipe (for WC) 1.00 Set 774.00 77400 0.02 0.80

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 1.00 Set 577.00 57700 0.02 0.80

86 15 Providing and fixing stainless steel drain jali of approved make/quality. 1.00 Each 51.00 5100 0.02 0.80

87 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 1.00 Each 436.00 43600 0.02 0.80

2 32 mm nominal bore. 1.00 Each 510.00 51000 0.02 0.80

88 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 1.00 Each 7564.00 756400 0.02 0.80

89 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1041.67 Liter 7.30 760400 20.83 833.33

90 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 2.00 Each 413.00 82600 0.04 1.60

91 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4644.00 464400 0.02 0.80

92 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 8013.00 801300 0.02 0.80

93 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 11021.00 1102100 0.02 0.80

94 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4356.00 435600 0.02 0.80

95 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 Each 4133.00 413300 0.02 0.80

96 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 10.42 Met. 262.00 272900 0.21 8.33

97 6 1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 6.67 Cum 26.50 17700 0.13 5.33

98 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 10.10 Cum 3384.00 3419300 0.20 8.08

99 20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 21.33 Sqm 62.50 133300 0.43 17.07

100 2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 104.17 Sqm 7.20 75000 2.08 83.33

101 1 2 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure. 9.58 Sqm 228.00 218500 0.19 7.67

1 5 Columns, Pillars, Piers and likes- rectangular or square in shape. 10.42 Sqm 297.00 309400 0.21 8.33

1 7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 5.21 Sqm 235.00 122400 0.10 4.17

1 8 Beams, lintels, cantilevers & walls. 8.33 Sqm 202.00 168300 0.17 6.67

102 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 13.95 Sqm 2005.00 2797000 0.28 11.16

103 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 5.67 Sqm 1780.00 1008700 0.11 4.53

104 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 79.20 Kg 67.50 534600 1.58 63.36

105 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 13.79 Sqm 658.00 907500 0.28 11.03

106 5 1 White washing with lime to give an even shade. On new work (Three or more coats) 31.30 Sqm 9.40 29400 0.63 25.04

107 7 1 Colour washing such as green, blue or buff with lime to give an even shade. On new work (two or more coats) including a base coat of white washing 20.46 Sqm 12.00 24600 0.41 16.37

108 9 1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) 37.69 Sqm 38.00 143200 0.75 30.15

109 10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats) 106.13 Sqm 44.50 472300 2.12 84.90

110 12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 96.50 Sqm 23.00 222000 1.93 77.20

111 13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 67.71 Sqm 94.50 639800 1.35 54.17

112 14 1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) 254.22 Sqm 41.00 1042300 5.08 203.38

113 16 1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 52.10 Sqm 74.50 388200 1.04 41.68

114 22 1 Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint 8.38 Sqm 55.00 46100 0.17 6.70

Total 125009700

Say Rs. 12.50 Lakhs

Hkouksa dk uke %&

1 foJkex`g NqbZ[knku

2 milaHkkxh; dk;kZy; NqbZ[knku

3 iqfyl ykbZu DokVZj NqbZ[knku

4 O;ogkj U;k;ky; Hkou NqbZ[knku

5 ,Q- VkbZi tt DokVZj NqbZ[knku

6 dU;k 'kkyk th-,-Mh- DokVZj NqbZ[knku

7 dU;k Nk=kokl NqbZ[knku

8 rglhy dk;kZy; NqbZ[knku

9 fodkl[k.M dk;kZy; NqbZ[knku

10 vkbZ-Vh-vkbZ- Hkou NqbZ[knku

11 dk;Zikyu vf/kdkjh DokVZj NksVh dkyksuh

12 'kkldh; egkfo|ky; Hkou NqbZ[knku

13 gkW;j lsds.Mjh Ldwy Hkou cqansyh

14 gkbZ Ldwy Hkou jksM+ vrfj;k

15 gkbZ Ldwy Hkou in~ekorhiqj

15 gkbZ Ldwy Hkou lkYgsdyk

16 gkW;j lsds.Mjh Ldwy Hkou BkdqjVksyk

17 foJkex`g x.MbZ

18 dU;k gkW;j lsds.Mjh Ldwy Hkou x.MbZ

19 ckyd Nk=kokl x.MbZ

20 iqjkuk rglhy dk;kZy; x.MbZ

21 'kkldh; egkfo|ky; Hkou x.MbZ

22 foJkex`g lkYgsokjk

23 fMxzh dkWyst Hkou lkYgsokjk

24 gkW;j lsds.Mjh Ldwy Hkou lkYgsokjk

25 iqfyl ykbZu DokVZj lkYgsokjk