SPL REPAIRS TO BLDG NO T 109 AND T 119 AND PROVN OF CERTAIN SANCTIONED WORKS AT OLD CANTT UNDER GE GANGTOK

Amount

Dismantling old PGI/CGI/Fiber sheeting any gauge, thickness including Nainital. Sikkim or similar pattern roof/facia including ridge etc and keeping serviceable sheets in safe custody for re-use complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed by the Engr-in-Charge.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description exc 10 cm in width and grith and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer complete all as specified & as directed.

M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer to new or previously un-treated steel surfaces of any description over 10 cm in width or girth including preparation of new steel surfaces complete all as specified and as directed.

Dismantling timber scantling 40sqcm and over in section any position as in unframed work complete all as specified and as directed.

M&L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.

M&L for 2nd class hard wood in scantlings and timber framed in repairs, to replace old and decayed timber (including piecing, scarfing etc of old and new timbers (if required) and removing defective portions to store etc complete all as specified and as directed.

Dismantling of wall and ceiling board (fibre pulp, insulation etc.,) /AC sheets and plywood any thickness and cover fillets and removal of dismantled materials/rubbish from site complete all as specified and as directed.

Materials & labour for 6 mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber frame work in wall complete all as specified and as directed.

Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and as directed by the Engr-in Charge.

S&F anodised aluminium snap grid frame work size 605x605mm for false ceiling including Hangers 6mm dia. G.I. (upto 120mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Materials and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails, cross sectional area exc 03 sq.cm & n.exc 06 sq.cm, complete all as specified and as directed.

Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for ceramic plain coloured tiles 7 to 8 mm thick (square / rectangular) conforming to IS 13712 grade B-II (a), approved make and colour shade, area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified & as dirceted.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry with 3.0kg of cement per Sq metre etc complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors steps etc including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:4) complete all as specified and as directed.

Material & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed..

M&L for Vitrified ceramic tiles 10 mm thick (Square / Rectangular) polished, area of each tiles not exceeding 0.36 sqm , as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed/bedding layer in cement mortar (1:6) complete all as specified and directed.

Taking down chowkats or frames with shutter of any description (without taking down shutter from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site complete all as directed.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 30 mm thick factory made flush door shutter, solid core construction, with block board core and plywood face panels. Commercial type on one side and other face covered with decorative face veneer with 6mm thick teak wood lipping / frame to match complete all as specified and as directed.

S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness , size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and removal from the site complete all as directed by the Engr-in-charge.

S&F 3mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n.exc 0.5sq. m in each pane fixed to steel frame complete all as specified & as directed.

Demoltion of precast block masonary or precast concrete article built in cement mortar complete all as specified and as directed.

M&L for brickwork with fly ash old size brick, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) etc complete all as specified and as directed.

M&L for walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1: 6) including brought upto course at interval of every 60cm including laying PVC pipe in weep holes complete all as specified and as directed.

M&L for raking out joints/pointing to random rubble masonary coursed or uncoursed work in walls on edge in floors, surface channels, roofs etc complete all as specified and as directed.

M&L for raised pointing in CM (1:4) to block in course or squared rubble coursed or uncoursed masonry or concrete block walling etc complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engr-in-Charge.

Materials & labour for rendering 15 mm thick in cement mortar (1:6) on fair face of brick or stone masonary of wall surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.

Materials & labour for rendering 15 mm thick in cement mortar (1:4) on fair face of brick or stone masonary finished even and fair to receive to tile cement etc complete all as specified and as directed.

M&L for rendering 20mm thick in CM (1:4) in two layers of 10mm and 5mm (outer layer CM should be added with liquid WPC) on fair faces of brick or concrete surfaces, complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified & as dirceted.

M&L for preparation of new plastered and other surface of walls and applying two coats of cement base paint and curing complete all as specified and as directed.

M&L for preparation of old plastered and other surface of walls and applying two coats of cement base paint and curing complete all as specified and as directed.

Taking up or down 15mm bore dia steel water tubings including fittings etc including cleaning for re-fixing or removal from site complete and making good disturbed surfaces of walls / ceilings etc complete all as specified and as directed.

Taking up or down 20mm bore dia steel water tubings including fittings etc including cleaning for re-fixing or removal from site complete and making good disturbed surfaces of walls / ceilings etc complete all as specified and as directed.

Supply and fix galvanised steel water tubing 15 mm bore dia, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.

Supply and fix galvanised steel water tubing 20 mm bore dia, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.

S&F Soap dish, vitreous china white, approximate size 160 x 160 x 90mm any type, fixed to plugs with chromium plated brass screw complete all as specified and as directed.

Supply and fix in repairs CP tubular towel rail 600 mm long with and including chromium plated brass screws complete all as specified& as directed.

S&F in repair stop valves fancy type 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for pipe or for unions and fixed complete all as specified and as directed.

S&F for cast iron Nahani Trap 100mm bore complete all as specified and as directed.

S&F for grating doom 100mm dia of PTMT (Minimum weigth 25 gms) complete all as specified and as directed.

S&F for 20mm gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair brass15mm dia CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee complete all as specified and as directed.

S&F in repair 75mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F aluminium anodised alloy curtains rod 25mm dia with fixing brackets, stops, roller etc complete all as specified and as directed.

Supply and fix in repair vitreous china, white colour, wash hand basin of size 55 x 40 x 79cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete all as specified and as directed.

M&L for Hardcore of gauge n. exc. 63mm deposited spread and levelled in layers n. exc. 15 cm thick watered and rammed to true surface complete all as specified and as directed.

M&L for 75mm thick PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) in plinth protection path/hardstanding finishing surfaces even and smooth without using cement including consturction joints at every 3m interval and each corner and provition of mastic filling complete all as specified & as directed.

M&L for PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and as directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation etc. Complete all as directed by the Engr-in-Charge.

Removing surplus soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase, railing and similar work including attached pillasters, buttresses etc vertical or to better in rough finished surfaces complete all as specified and as directed.

M&L for returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick as in hard / rocky / soft / loose soil complete all as specified and directed.

Surface dressing n.exc 15 cm deep getting out in soft/loose soil complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) including brought upto course complete all as specified and as directed by the Engr-in-Charge.

M&L for sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) finished and even as in floor complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with Solid blocks, PCC (1:3:6) type C1 (20mm graded stone aggregate) exc. 10cm in width and setting in mortar (1:6), complete all as specified and as directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe - 410 (Gde E-250) including distance pieces, cleats etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of acrylic emulsion distemper in walls over a 3mm thick wall care putty over a coat of wall primer complete all as specified and as directed.

M&L preparation of newly plastered surface of walls and applying two coats of weather proof paint (Weather coat) over a coat of alkali resistance primer on new surfaces of walls complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, bases for columns etc complete all as specfied and as directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) columns , pillars, piers, posts and struts etc complete all as specfied and as directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specfied and as directed.

Use and waste of Formwork to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation & similar works, vertical of to batter, rough finished surfaces of concrete flat complete all as specified and as directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specfied and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc complete all as specfied and as directed.

S&F TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping of columns, hooking ends and biniding wireand including mild steelw wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Ditto as per item No 83.00 here-in-above but 5 mm and over upto and including 10 mm dia in stirrups spacersand binders complete all as specified and directed.

S&F aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. Note :- Aluminium frame of weight not less than 0.55 Kg/Rm

S & F in repairs 5.5mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F aluminium Powder coated of any colour (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and as directed.

M&L for 18-20mm thick Granite slab green in one piece machine cut , as in steps , jambs, pillars, window cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stone slabs such as in steps , cooking platforms, and other similar situations over and including 20mm thick bedding / backing layer in cement mortar (1:6) complete all as specified and as directed.

S&F Solid PVC single side prelam wall Lining consisting of 5mm thick PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

M&L for pointing to block in course or ashlar masonary or random or polygonal rubble, uncoursed or bought upto course etc complete all as specified and as directed.

S&F PVC (SWR) pipe half round 150mm dia with rounded edges incl all accessories like bend T etc for eaves gutter complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall, laid in trenches or in floor with all necessary clamps, bolts, bends, Tee etc. complete all as specified and as directed.

E/M Portion: Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders and including making good the disturbed surface on walls complete all as specified and as directed.

M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable, 1100 volt, FRLSH grade of size 1.5Sqmm drawn through and including surface PVC casing & caping (ISI Marked) with accessories including PVC Box or existing sunken box and hylem sheet/PVC Box including 1.5 sqmm copper conductor cable for earth continuty green in colour for one light point/fan point/Bell point controlled by one 5/6 Amps one way switch complete all as specified and as directed by Engr-in-charge. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and as directed by the Engineer-in-Charge.

All as per item Ser No 94.00 here-in-above but for one socket outlet/metal clad socket of 5 Amps fixed on independent board complete all as specified and as directed.

All as per item No 94.00 here-in-above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

Description all as per item No. 94 here-in-above but for 15/16Amp switch socket out let, independent with 2.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 2.5 Sqmm for earth continuity conductor, complete all as specified and as directed.

Supply and fixing of switch paino, flush type, single pole, one way, 5/6 Amp, (ISI marked) complete all as specified & as directed.

Supply and fix switch socket combination 2 pin & 3 pin 5 Amp, 230 volt flush, multipurpose, flush, non shutter, non inter locking type, white/ivory finish with 2 screw fixing hole including suitable gang box fix on wall complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 6 pin , 5/6 Amp and 15/16 Amps, 230 volt flush, multipurpose, flush, non shutter, non inter locking type, white/ivory finish with 2 screw fixing hole including suitable gang box fix on wall complete all as specified and as directed.

S&F ceiling rose, PVC/Polycarbonate insulated body, 3 terminal and 240 volts (ISI marked) complete all as specified and as directed.

S&F in sheet metal enclosure for 12 way Distribution Board (DB's), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/Ilolators complete all as specified and as directed.

S&F in sheet metal enclosure for 8 way Distribution Board (DB's), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/Ilolators complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn PVC casing and capping not less than 25mm dia and one run of PVC insulated serviceable of 6 sqmm as earth continuity conductor drawn in casing and capping with accessories complete including taking down old unserviceable wiring complete all as specified and as directed. Note : 3 runs of 6 sqmm and 1 run of conduit will be measured as one unit i.e RM

S&F MCB single pole & neutral 63 Amps, 240 Volts, 10 KA rapturing capacity, C curve complete all as specified and as directed.

S&F MCB single pole & neutral 32 Amps, 240 Volts, 10 KA rapturing capacity, C curve complete all as specified and as directed.

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10kA rupturing capacity, C curve complete all as specified and as directed.

Supply & fix lamp holder angular / straight insulated body, with back plate suitable for batten fittings, white / ivory finish complete all asspecified and as directed.

S&F in replacement LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W complete all as specified and as directed.

S&F LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. Make:- (i) Crompton Cat part No. CCS-100-20-65-HLL-OP-NWH (ii) Havells Cat part No. ENDURALINEARPROBS20WLED 865SPCSSIND (iii) Philips Cat part No. BN170C LED20S-6500PSU L120

Supply and fix in repair of LED Bldg security light 25W,>110 Lm/watt,IP-66 protection made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded cover toughned glass having top opening separate driver compartment with IP 66 protection with inbuilt surge protector and impact resistance of IK07 complete all as specified and as directed by Engineer-in-charge. Make:- (i) Havells Cat part No. ENDURASUNDOWNSL25 WLED765PASYBOTGIHD (ii) Crompton Cat part No. LSTS-25-CDL-M (iii) Philips Cat part No. BRP042 P LED25 CW SLE S1 PSU GR P4210

Supply and fix in repair of 10 Watt LED Bulk Head fitting Environmenatal friendly pressure die cast aluminium housing,IP-65, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make:- (i) Crompton cat part No.- LBHE-10-WW (ii) Havells cat part No. HEXAFT 10 W LED 857SSYMBOPC (iii) Philips cat part No. WT202W LED6S NW PSU S2 PC

Supply and fix in repair of 20 W LED tubelight fitting with lamp,Extruded aluminium, PC Diffuser, efficiency >125 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make-Crompton cat part CCS-100-20-65-HLL-OP-NWH / Havells cat part No. ENDURALINEARPROBS20WLED 865SPCSSIND/ Philips cat part No. BN170C LED20S-6500 PSU L120

Supply and fix aesthetically designed 2X2 LED flat panel for ceiling mounting which provides soft light and glare free illumination not less than 36 watt,efficiency >125 lm/ W, including and connecting up all as specified and as directed. Make:- (i) Havells cat part No.VENUSNEO2X2PLR36WLED865PO (ii) Crompton cat part No. TCR-145-36-65-SL-NWH (iii) Philips cat part No. RC360B LED36S-6500 V1 L60W60 PSU OD

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber & RCC (1:2:4) type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel as per SSR part-I complete all as specified and as directed. Note- Earthwork,strip protection,strip upto 7.5 meter are also included in quoted rate.

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated PVC sheathed IS-7098 (Part-I), screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 2 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply and laying of DWC HDPE pipe, ISI marked in trenches in cable ducts or fixed on walls, using clamps alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II compelete with fitting and cutting, jointing etc. of size 50mm outer dia complete all as specified and as directed by the Engineer-in-Charge.

S&F 40mm dia GI pipe, medium grade complete with all fittings fixing on wall, jointed tested and commissioned complete all as specified and as directed.

M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall / fixed to roof, ceiling etc. and including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60mm thick sheet steel duly painted concealed in walls, with face plate and base plate/ PVC sheet ISI marked top cover with brass / chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc connected to main switch / DBs or common earth dolly for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and as directed. Note : Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

M&L for sub main wiring with 2 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn PVC conduit not less than 25mm dia and one run of PVC insulated serviceable of 6 sqmm as earth continuity conductor drawn in casing and capping with accessories complete including taking down old unserviceable wiring complete all as specified and as directed. Note : 3 runs of 6 sqmm and 1 run of conduit will be measured as one unit i.e RM

M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn PVC conduit not less than 25mm dia and one run of PVC insulated serviceable of 4 sqmm as earth continuity conductor drawn in casing and capping with accessories complete including taking down old unserviceable wiring complete all as specified and as directed. Note : 3 runs of 4 sqmm and 1 run of conduit will be measured as one unit i.e RM

Supply & installation of galvanized steel high mast lighting system of 15/16 metre in two section, section thickness 3mm High tensile steel confirming BSEN 10025 grade S355 ; Welded along longitudinal section top dia 150mm, bottom dia 360mm,base plate thickness 25mm 7 dia of 520mm 12 side polygon of mast cross section and 900X250mm opening and door at base, Gl single spike of length 1200mm lightening protection, max wind speed 180Km/Hr 6 Nos of foundation bolts of M 30/850/8 TS 600/25mm dia 85mm long foundation bolts 600mm (ID) dia carriage ring Winch /power tool, Integral double drum, 50:1 Gear ratio SWL 500Kg flame proof integral motor operation 1.5 HP of motor capacity single speed reversible 415 Volts/240 Volts 6 pole single speed with motor and manual operation self lubricant in permanent oil bath of lubricant 90/140 facility of torque limitor with 2x6 mm dia stainless steel rope system and all required standard accessories complete alongwith the following:- (a) Timer Panel/Photo sensitive type. (b) Hoist starter/up and down movement. (c) Foundation as per OEM recommendation. (d) LED aviation light twin type made out of high pressure dia cast housing. (e) fittings 4Sqmm, 4 core flat copper cable complete from times panel to light (f) Manual operation handle. Note:- Rate quoted included the cast of excavation and foundation and necessary item for the commissioning of high mast. Make:- K-Lite Industries Chennai/Crompton/Utkarsh India Ltd Kolkata, SYSKA

Supply and fix LED flood light of not less then 200 watts 135 lum/watt, IP-66, 1K10, high power single dia ceramic band LED for highmast complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat part No JETAVALOURFL200W LED 757 PINTNBLTG Philips Cat Part No BVP483 LED238SMB AIPSUGRSPD Crompton Cat part No: LFLN-200-CDL/60-HPM or technically and financially equivalent in Bajaj/wipro

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated PVC sheathed IS-7098 (Part-I), screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply and laying in trenches/under roads/crossings are fixed to wall/pole, GI tubing light grade of size 50mm dia for protection of UG cables, payment for excavation and earth work shall be paid separately under relevant items of schedule complete all as specified and as directed by Engr-in-Charge.

Supply , fixing and commissioning Design verified as per IS /IEC-61439-1&2 LT Panel indoor/ LT Pillar Box by CPRI approved manufactures of comprising of the following all as directed by removing the old existing panel complete with out damaging the existing floor / cable ducts at secondary sub station complete all as specified and as directed. Note: The details of LT Panel board have been given against Particular Specification Clause No 29.09 to 29.15 of this tender.

M&L for cutting the existing road/PCC/drain for taking out/laying of underground cable including necessary earth work excavation and making good to match with the existing surface complete all as specified and with PCC (1:3:6) type C1 (using 20mm graded stone aggergate) 100mm thick complete all as specified and as directed

Supply and fix earth continuity conductor or main earthing lead fixed to wall on battern or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of 32 x 6 mm glavanised iron strip complete all as specified and as directed.

M/S ANIL KUMAR THAKUR (BID ID -3095844)

M/S S. S CHETTRI AND SONS (BID ID -3095057)

MAHENDRA KHAWAS (BID ID -3097523)

KAMLESH ENTERPRISE (BID ID -3094956)

KARMA SHERPA (BID ID -3097345)

BIJAY MITTAL (BID ID -3093828)

KARMA TSETEN BHUTIA (BID ID -3097126)