Construction of passenger waiting room near Shivala temple located in Gram Panchayat Beehat Biram, Block- Machhrehta

Excavation of foundation in ordinary soil loam, clay clay and sand including lift upto 1.50 m. and lead 30 m. and including filling, watering and ramming of excavated earth into space between building and side of foundation trenches etc. all complete as per D.S.R. No.-2.8.1

Providing and Laying cement concrete in 1:4:8 with cement, coarse sand and 40 mm brick ballast including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-4.1.8

R.C.C. work in 1:1.5:3 with cement, coarse sand and 20 mm stone grit in the Column including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-5.1.2

Mild Steel or Iron Work in the reinforcement including cutting, bending & binding etc. all complete as per D.S.R. No.-5.22.1

Centering and Shuttering including strutting, propping etc. removal of form of work as per D.S.R. No.-5.9.1

Class-150 brick work in 1:6 with cement and coarse sand mortar in foundation and plinth including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-6.1.2

Class-150 brick work in 1:6 with cement and coarse sand mortar in super structure including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-6.4.2

12 mm thick plaster with cement and coarse sand mortar in 1:4 including supply of all materials, labour and T & P etc. all complete as per D.S.R. No.-13.4.1

Earth Work in embankment in the ordinary soil excavation to be done from of regular pits 20 cm. layers including ramming and dressing the pulverization surface to required levels and slope directed by the Engineer-In-Charge as per D.A.R. No.-2.25 (a)

Kota Stone Slab Flooring over 20 mm thick base laid over and jointed with grey cement slurry mixed with pigment to match with base of cement mortar 1:4 with cement and coarse sand mortar etc. all complete as per D.S.R. No.-11.26.1

Steel Work welded in built upe sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-10.16.2

Steel Work welded in built upe sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-10.2

Providing of Corrugated G.S. Sheet Roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete and excluding cost of purlins, rafters and trusses including cutting to the size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/sqm etc. all complete as per D.S.R. No.-12.1.3

Providing and Fixing of the Precoated Galvanised Steel Sheet Roofing accessories 0.50 mm (+0.05%) and also total coated thickness zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws etc.. all complete as per D.S.R. No.-12.51.1

Painting or Varnishing on new iron work in small areas or new wood work with one coat of approved superiour quality ready mixed enamel paint of varnish and including supply of all the materials, labour and T & P etc. all complete as per D.S.R. No.-13.48.3

Supply and Fixing Retro Reflective Signboard made of 2 mm aluminium or 4 mm ACP sheet and face to be fully covered with diamond grade cube retro reflective sheeting type XI as per IRC:67 2010 in approved colour, fully processed on by pressure sensitive equipment as specified by approved brand back of alluminium frame of size 35 x 35 x 5 mm angle iron all round and cross with proper claming arrangement to be fixed in structure they back of aluminium sheet shall be enamel coated etc. all complete as per C.H. No.-26, S.L. No.-05, 805, S.O.R. Lko, Date-18/9/2020

Provision of the Inorgation Stone including fixing, writing and painting etc. all complete

Add 18% GST