Labour charges for Renovation of two C-Type staff quarters and other quarters at IICT, Hyderabad

Amount

Civil Items :Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge beyond 50m initial lead, for all leads including all lifts involved

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100 mm dia pipe

Removing of existing 4mm thick bituminous membrane in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length including hold fast lugs or dash fastener. Second class teak wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges, handles and tower bolts bright finished of required size Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutters.35 mm thick including ISI marked Stainless Steel butt hinges with handles, towerbolts necessary screws as directed by engineer-in-charge

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm including necessary fittings as directed by engineer-in-charge

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 4 mm thick FORSOC or its equivalent approved make as directed by engineer-in-charge

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 3 m above floor level, over first class kail woodstrips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame Flat & Curved surface of approved design as directed by engineer-in-charge Saint Gobain or its equivalent approved make as directed by engineer-in-charge

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with "S" or "P" trap includingdismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm

Labour charges for Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) Note : Material Will be supplied at departmental stores

Labour charges for Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete

Labour charges for laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources

Labour charges for Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Note : Material will be supplied at departmental stores

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leveL Thermo-Mechanically Treated bars of grade Fe-500D or more

Labour charges for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Labour charges for Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4(1 cement :4 coarse sand)

Labour charges for 12mm plaster of mix 1:4 (1 cement: 4 fine sand) as directed by engineer-in-charge

Labour charges for 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) with smooth finish as directed by engineer-in-charge

Labour charges for 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Labour charges for laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 600x600 mm Note : Only tiles, cement & sand will be supplied at the departmental stores

Labour charges for laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of Tile 600x600 mm Note : Only tiles, chemical bags will be supplied at the departmental stores

Labour charges for fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing. Granite of steelgrey / cateye/ premimum black colour of approved colour Note : Only granite will be supplied by the department

Labour charges for Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm

Labour charges for laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Note Only tiles, cement and sand will be supplied at departmental stores

Labour charges for of fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Note : Only tiles will be supplied at departmental stores

Labour charges for applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Note : Only putty will be supplied at departmental stores

Labour charges for Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer Note : Only primer will be supplied at departmental stores

Labour charges for Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade : Two or more coats on new work Note : Only paint will be supplied at departmental stores

Labour charges for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm Note : Only paint & primer will be supplied at departmental stores

Labour charges for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work Note : Only enamel paint will be supplied at the departmental stores

Labour charges for Polishing on wood work with ready made wax polish of approved brand and manufacture

Labour charges for fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Labour charges for fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Labour charges for fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Labour charges for fixing soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Labour charges for fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Labour charges for fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Labour charges for fixing uplasticised PVC connection pipe with brass unions 45 cm length 100 mm diameter

Labour charges for fixing wash basin with C.I. brackets, 15 mm C.Ppillar cock, 32 mm C.P waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm c.p pillar cock.

Labour charges for fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia

Labour charges for fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid

Labour charges for fixing 2 way Bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Labour charges for fixing healthfaucet of approved quality 15 mm nominal bore

Labour charges for fixing C.P Brass angle valve of approved quality conforming to IS:8931 : 15 mm nominal bore

LABOUR CHARGES FOR fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Labour charges for fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Labour charges for fixing soil, waste and vent pipes : 100 mm diameter of approved make 100 mm dia Sand cast iron S&S pipe as per IS: 1729

Labour charges for fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia

Labour charges for fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet

Labour charges for fixing plain bend of required degree 100 mm dia Sand cast iron S&S as per IS : 3989

Labour charges for fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S IS: 3989

Labour charges for fixing soil, waste and vent pipes.75mm diameter. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.

Labour charges for fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75 mm dia Sand cast iron S&S as per IS- 3989

Labour charges for fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75x75x75 mm Sand cast iron S&S IS: 3989

Labour charges for fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet

Labour charges for fixing plain bend of required degree 75 mm dia Sand cast iron S&S as per IS : 3989

Labour charges for fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm dia pipe

Labour charges for fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25mm dia pipe

Labour charges for fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink withOUT drain board610x460 mm bowl depth 200 mm

Labour charges for fixing wall mixture and divertor as directed by Engineer-in-charge

Labour charges for fixing toilet paper holder : C.P. brass

Labour charges for fixing C.P grating of approved quality and colour. Circular type 100 mm nominal dia

Labour charges for fixing C.P grating of approved quality and colour Circular type125 mm nominal dia with 25 mm waste hole

Exposing the corroded steel around its full circumference and cleaning the same to remove all loose scales and corrosion deposits by hard brush with emery paper or, by any suitable mechanical means as directed by Engineer-in-Charge, so as to get bright conditions and removing the corrosion deposits from pits and imperfections within its surface by compressed air and water at a high pressure and providing and applying one full coat of anti corrosive treatment of epoxy 'A' (Nitozinc primer/ Zinc rich primer of FOSROC Product ) or any other equivalent approved compound over the cleaned and prepared surface as per manufacturers specifications.

Providing and Applying a bond coat of Nitobond 'EP' of FOSROC product to the exposed surfaces of all structural members i.e., slabs, beams, columns etc., as per the manufacturers specifications as directed by Engineer-in-Charge.

Providing and Applying brush bond of FORSOC product in 2 coats as per the maufacturers specifications at levels including required scaffolding as directed by engineer-in-charge

Grouting the porous slabs through entry ports with providing cement slurry ( grout ratio 15 Kgs cement with 20-22 litres of water ) under pressure of 40 psi by using admixture 'F' (Cebex - 112 of FOSROC Product )at all levels of floors of the building including using silica fumes powder if requred 10% by weight. Prior to grouting all drilled holes shall be cleaned with compressed air.

Labour charges for fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Labour charges for fixing bright finished brass handles with screws etc. complete: 125 mm

lABOUR CHARGES FOR laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. Note : 1) Above all materials for labour charge items will be supplied at the departmental stores 2) No Transportation charges will be paid

Electrical Items:Dismantling of existing wiring, switch boards, Holders,FTLs,DB's and shifting the dismantled items to the nearest departmental stores as required and as directed by the engineer in charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Wiring for twin control light point with 1.5 sq.mm FR PVCinsulated copper conductor single core cable in surface/recessed medium class PVC conduit/ PVC Casing and Caping, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 5 x 6 sq.mm

Drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 3 x 4 sq. Mm

Drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 3 x 2.5 sq. Mm

Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessed conduit as required.25mm

Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessed conduit as required.32mm

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Telephone Wiring in existing Conduit :Supplying and drawing following pair 0.5 sq mm FR PVCinsulated annealed copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ PVC conduit as required.

Fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1Module

Fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required3 Module (100mmX75mm)

Fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required4 Module (125mmX75mm)

Fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required6 Module (200mmX75mm)

Fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required8 Module (125mmX125mm)

Fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required12 Module (200mmX150mm)

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required15/16 A switch

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required3 pin 5/6 A socket outlet

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required6 pin 15/16 A socket outlet

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredBell push

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredTelephone socket outlet

Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredTV antenna socket outlet

Fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. As required

Fixing PVC batten/ angle holder including connections etc. as required.

Fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / bulk head fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Fixing following way , three pole horizontal type and neutral,sheet steel , MCB Distribution board , 415Volts, on surface/recess complete with tinned copper bus bar, neutral bus bar,earth bar,din bar ,detachable gland plate ,interconnections, phosphatized and powder painted inclding earthing etc..., as required (But without MCB/ RCCB/Isolator)6 way (4 + 18), Double door

Fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral

Fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral

Fixing DP sheet steel enclosure on surface/ recess along with 32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Fixing of Bulk Head Fittings with 10W LED on surface as required and as directed by engineer in charge.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Installation, testing and commissioning of Decorative lighting like Astra spot tilteble 3W/Corona chandiler/Smart connect Garnea down lighter 10.5 W/Wall Decorative etc with Glasshousing,Lamps and all inetrconnected accessories like Drives /Bridge /Dimmer controllers as required, including wiring recess /surface as required complete and as directed by the engineer incharge.

Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. Mm

Earthing with G.I. earth plate 600 mm X 600mm X6 mm thick including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7metre long etc. with charcoal/ coke and salt as required. Note : 1. All materials will be supplied at departmental stores. 2. No Transportation charges will be paid extra.

BODASU CHANDRASHEKAR

Y RAJA SHARMA

D KARUNAKAR

RAMI REDDY KAKU