Repairs to Anganwadi and Kitchen shed Building at Perumalpatty in Kavinadu West Panchayat

Amount

Chipping of concrete and roughening the surface including cost and conveyance and all labour charges etc

Paving the floor with kotta stone of size 610x610x20mm cm 1:3 mix 20mm thick including cost and conveyance and all labour charges etc

Special ceiling Plastering with cement mortor 1:3 mix 10mm thick including cost of conveyance of all materials to work site and all labour charges etc. complete.

Plastering with cement mortar 1:5 mix to 12mm thick including cost of conveyance of all materials to work site and all labour charges etc. complete.

Dismantling of One Course of Pressed Tile Roof finish in cement mortar

Finishing the top of the roof with one course of Machine PressedTiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

Supply of New Steel Door including cost and conveyance of all materials to site and all labour charges etc complete

Fabrication supply and fixing in Wels mesh works

White washing two coats using shell lime including cost and conveyance and all labour charges etc

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, hig

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherev

Painting the Old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. swithc box and 5A F.T. switch with painting of suitable colour for open Light point (As per S.D. 21)

Supply of 3 plug point including all labour charges etc., completed (AS per S.D.36)

Supply and fixing of Tube 20W LED Tube Light for T8 Fitting (Single Side)

Supply and fixing of 1200mm(48") AC ceiling FAN complete with stepped etecronic 300w regulator with 300mm down rod on the existing clamp (As per SD 106)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 1.1 & 1.24 of Section 2 of Instruction to Bidders (ITB) of SBD)

M. SANKAR