CERTAIN SPECIAL REPAIR REVENUE AND MINOR WORKS IN THE AOR OF AGE BR I AND EM I UNDER GE C KIRKEE

Amount

Taking down chowkats and frame n.exc 1.5 Sqm each of any type including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each of any type including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed.

S & F Pressed steel door frame for doors of size 125 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.

M&L for 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both faces including all necessary fittings, complete all as specified and as directed by Engr-in-Charge.

S & F 35mm thick 2nd class HW glazed or skelton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as per clause No. 8.20 (a) of SSR pt-1 complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed.

S&F 150mm size Extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt 12mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F in repair mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Floor door stopper having overall length of cover plate is 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F aluminium anodised barrel tower bolt 150mm long of extruded section with steel screws complete all as specified and as directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm stainless steel wire mesh and fittings etc and making good the jambs and painting with paint should match with the existing suface complete all as specified and as directed.

S& F Machine cut cudappah stone slab 20-25mm thick as in steps, jambs, pillars, window cills, cooking plat forms and like over and including 15 mm thick CM(1:4) screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including dismantling stone slabs laid and beded in any mortar all as specified and directed by Engr-in-Charge.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc and making good the jambs and painting with paint should match with the existing suface complete all as specified and as directed.

S & F framed work such as grills, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for preparing new Steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying evenly two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base course including demolition of existing PCC floor complete all as specified and as directed.

M&L for Vitrified Ceramic tiles (light shed) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in flooring with and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Vitrified Ceramic tiles (light shed) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as Skirting and dadoes etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10 mm thick rendering as backing coat in CM (1:4) complete all as specified and as directed.

M&L for non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450 X 300 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick cement plaster (1:4) as backing coat complete all as specificed and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engr in Charge.

M&L machine cut kota stone slab 20-25mm thick over and including 10mm thick backing coat of cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing as in skirting, vertical any type of surfaces, riser of steps including moulding where required complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, partition wall, cooking platform, window cills and other similar situations complete all as specificed and as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc at any position including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L rendering 12mm thick in cement mortar (1:6) on brick walls or concrete surfaces complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing top surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering on concrete surfaces of ceiling in CM (1:3) and rendering is to be finished even and smooth without using extra cement complete all as specificed and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

M & L preparing new plastered wall surfaces by applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L preparing old plastered wall surfaces by applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls and applying evenly two coats of white wash complete all as specified and directed.

M & L preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint (white or tinted) complete all as specified and as directed.

M&L for applying two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specificed and as directed.

M&L for applying one coats of white wash on ceiling including preparation of old decorated plastered surfaces complete all as specificed and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs, water troughs, benching and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed.

S&F 1000 litres capacity rotational moulded, polythene water storage tanks triple layer (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings and taking down existing unserviceable overhead water tank of 1000 liter capacity complete all as specified and as directed.

S&F in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 20 mm bore complete all as specified and directed.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe. (Minimum weight 15mm-142gms/ 20 mm - 210 gms . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

Taking up or down GI tubing 15mm bore and connections including removal to store complete all as specified and as directed by Engineer in charge.

Taking up or down GI tubing 20mm bore and connections including removal to store complete all as specified and as directed by Engineer in charge.

S & F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer in charge.

S & F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer in charge.

Refixing 15mm and 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

S&F in repair bib taps, long body with flange, cast copper alloy, chromium plated, fancy type screwed for 15mm bore of iron pipe or for brass ferrule complete all as specified and as directed.(Make : Prayag cat No. 8308)

S & F in repairs angle stop valves cast copper alloy, chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and as directed.(Make : Prayag cat No. 8310)

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed.(Make : Prayag cat No. 8304)

S & F in repairs stop cock (concealed) cast copper alloy, chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions or brass ferrule with long shunk and cup 15mm bore complete all as specified and as directed.(Make : Prayag cat No. 8318/20)

S & F in repairs brass CP overhead shower rose 225mm round with arm and flange including fixing to steel pipe complete all as specified and as directed.(Make : Prayag cat No. BS-67)

S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and as directed.

S&F in repair wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings ans waste pipe 32mm bore size, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and as directed.

S&F in repairs Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including connection to trap and to flushing pipe, antisyphonage pipe complete all as specified and as directed.

S&F in repairs wash down water closet (pedestal pattern) complete (including fixing of seat cover) pedestal pan and trap including connection to drain (or outgoing pipe ) and flushing pipe, antisyphonage pipe etc complete all as specificed and as directed.

Supply only Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel hinge chromium plated.

S&F in repairs/new provision sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with and including 32/40mm dia PVC waste pipe with coupling complete all as specified and as directed.

S&F Grating doom 125mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F in repair 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specificed and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed, 110mm bore in any length with rubber ring joints, fixed to walls etc including taking down existing unserviceable SWR pipes and fittings complete all as specified and directed

S&F PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, fixed to walls etc including taking down existing unserviceable SWR pipes and fittings complete all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 110 mm bore/dia complete all as specified and as directed.

S&F in repair PVC (SWR) bends of any radius 75 mm bore/dia with access door complete all as specified and as directed.

S&F in repair PVC (SWR) branch piece, single (single ' Y'), equal or unequal, 110mm bore/dia complete all as specified and as directed.

S&F in repair PVC (SWR) branch piece, single (single 'Y'),equal or unequal 75mm bore/dia complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (Single 'T') equal or unequal, 75mm bore/dia complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (Single 'T') equal or unequal, 100mm bore/dia complete all as specified and as directed.

S&F in repair 100mm bore/dia PVC vent cowl all as specified and directed.

S&F in repair 75mm bore/dia PVC vent cowl all as specified and directed.

S&F in repairs SS Curtain rod 25mm dia fancy type complete all as specified and directed.

S&F in repair decorative Knob stainless steel curtain brackets for fixing of curtain roads including necessary fittings such as rawl plug and screws complete all as specified.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified.

S&F in repair stainless steel glossy finish Soap dish fixed to plugs with chromium plated brass screws complete all as specified. (Make : Prayag cat No. BA-15S)

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick Plain Cement concrete (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as as specified and as directed by Engr-in-Charge.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in sub base complete all as specificed and as directed.

M&L for sand/stone dust filling under floor or in foundation or for cushioning of UG cable/ at cable trenches including watering and consolidation complete all as specificed and as directed.

M & L for Coloured Machine pressed glossy finished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment laid over sand cushion complete all as specificed and as directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in (CM 1:6) complete all as specified and as directed.

M&L for 20 mm thick rendering in CM 1:4 in two layers over Stone masonary surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 20 mm thick rendering in CM 1:6 in two layers over Stone masonary surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L rendering 15mm thick in cement mortar (1:6) on brick/solid block walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

S&F pre painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old corrugated or semi corrugated or plain AC sheets complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling old corrugated or semi corrugated or plain AC sheets complete all as specified and as directed.

M & L for preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg two coat of synthetic enamel paint any tint complete all as specified and as directed.

Demolition of cement concrete (reinforced) as in roofs, floors, beams, staircase landing, chajjas and similar suspended work chajjas, facia and the like complete all as specificed and as directed.

S & F for E-board 'Everest' make 595x595x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including taking down wall/ceiling boards(fibre, pulp insulation etc) or insulation boards any thickness including fillets complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

S & F 2nd calss hardwood 35mm thick plain framed panelled factory made door shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and aplying two coat of Synthetic enamal paint of any type complete all as specified and directed by Engr-in-Charge.

Construction of septic tank for 300 users, excavation in any type of soil/rock, PCC in foundation, brick work in cement mortar, RCC slab covers including RCC precast manhole cover having 6mm thick plate embeded all around/ fibre reinforced cover with angle iron frame vent shaft and slude chambers etc complete all as specified and as shown in TD drawing No. CEPZ/93/TD/12-STR sheet NO.1/1 and as directed by Engr-in charge.

M&L for Soakage wells of size 1.8M diaX 3.0 M effective depth excavation, in any type of soil/rock PCC 1:3:6 in foundation, walls of honey combed Brick masonry with top ring of RCC (1:1.5:3) including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC (1:1.5:3) cover slab / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as speified and as shown in drawing No.CEPZ/2019/TD/03 Sheet 1/1 and 1/2 dated 30 Apr 2019 and as directed by Engr-in charge.

Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in soil complete all as directed.

Removing excavated surplus soil not exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for Reinforced cement concrete pipes, 200 mm bore of pipes Class NP-2, laid and jointed with collars including demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (Using 40 mm graded stone aggregates) as in concrete bed to drain pipes for 200 mm bore dia including packing under haunching against the side of pipe after laid and tested etc. complete all as specified and as directed.

M&L Precast RCC slab 1:2:4, type B1(using 20mm graded stone aggregates) as in cover slab (for manholes), landings, chajjas,water troughs,hangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed.

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified and as directed.

Cutting into existing manholes for conncting new drains 200 mm dia pipe, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement conrete 1:2:4 type B-1 smooth finished , and reforming benching as reqd. complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately ) and making good disturbed surfaces of walls, floors, etc

M&L point wiring with 1.5 Sqmm size PVC insulated unsheathed 1100 volt grade single core stranded FRLSH (multithreaded) copper conductor cable drawn into and including PVC casing caping of suitable size with all fitting and accessories with sunk type pressed steel terminal/PVC surface type boxes of 1.6 mm with 3 mm thick laminated sheet top cover concealed/surface in walls complete for Provn of switches/socket/fan regulators including one continuous run of PVC insulated (green colour) 1.5 sqmm multi stranded FRLSH copper conductor cable as earth wire and connected to common earth dolly for the following :- One light/fan point controlled by one, one way 5 Amps switch.

All as per item No.114 One ceiling fan /Exaust fan/wall mounted fan point controlled by one switch.

All as per item No.114 One three pin 5 Amp socket outlet ,with cables 1.5 sqmm size on independent bord.

All as per item No.114 One three pin 5 Amp socket outlet, with cables 1.5 sqmm size on same bord.

All as per item No 114 above but with 2.5 sqmm size PVC insulated and unsheathed 1100 volt grade multistranded FRLSH copper conductor cable for 3/6 pin socket outlet 15 amp on one independent board.

M&L for surface submain wiring with two sinle core PVC insulated and unsheathed 1100 volt grade multistranded FRLSH copper conductor cable of size 4 sqmm in PVC casing caping of suitable size with all fittings and accessories alongwith one single core green colour 1100 volt grade multistranded FRLSH copper conductor cable of size 4 sqmm as earth lead and connected to earth dolly.

S&F 5 Amp switch piano type single pole one way.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

S&F socket flush type 6 amps, 5 pin, 230v incl dismantling taking down unsv one all as specified and as directed

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v

S&F ceiling rose surface Bakelite three terminal all incl dismantling taking down unsv one

S&F flush type electronic fan regulator with 5 step type, 240 Volts AC, 50 Hz

S&F Sheet metal Enclosure SPN 8 way (MCB DB) Double door, 240 Volts AC.

S&F Sheet metal Enclosure SPN 4 way (MCB DB) Double door, 240 Volts AC.

S&F MCB distribution board 04 way TPN double door (metal door) vertical with 200 Amps rated bus bar 240 volts

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 Amps in the DB complete with connection testing and commissioning.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing and commissioning.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

S&F LED Light fitting 20 watt AC decorative box type with driver ,holder including LED Tube Light connecting with three core flexible copper conductor cable from ceiling rose complete.

S&F LED Light fitting mirror type with with high output diffuser 2 feet, 10 watt, 230 volt including driver and Lamp connecting with three core copper conductor cable complete.

S&F LED lamp 9/12 watt, CDL, E-27 230v PF-0.95(min).

S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make-shakti, Cat Part No SZPSLMM015 or equivalent from approved list of make circulated By E-in-C.

S&F ceiling fan of 1200 mm sweep 230 volt and min air delivery 210 CFM incl fan rod with suitable clamp, nut, bolt & washers complete.

S&F Exhaust fan Metal body light duty 300 / 225 mm sweep 230 volt AC complete with frame and Louvers Making of suitable hole in brick / stone wall for fixing of Exhust Fan 300 / 225 mm sweep complete all as directed by Engineer-in-charge.

M & L for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Supply, laying in trenches and testing of UG cable 25sqmm 04 core XLPE insulated screened,PVC bedded galvanised steel strip or wire, armoured heavy duty electric power cable with stranded aluminium conductor 1100 volts including taking down existing unserviceable cable complete all as directed and specified.

Supply, laying in trenches and testing of UG cable 35sqmm 04 core XLPE insulated screened,PVC bedded galvanised steel strip or wire, armoured heavy duty electric power cable with stranded aluminium conductor 1100 volts including taking down existing unserviceable cable complete all as directed and specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and as directed.

Excavation in trenches in soft disintegrated rock not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and as directed.

M&L for brick protection with old size sub-class bricks ‘B’ Designation 75 for UG cable.

M&L Cutting to the existing Road/hard standing upto 300mm deep and 200mm wide for crossing GI water pipe line and make good by filling mass concrete PCC 1:4:8 as per existing pattern complete all as directed by Engineer -in-charge.(Note: Mass concrete PCC 1:4:8 shall be measured and paid in seperate item of this BOQ)

M & L GI tubing 40 mm dia medium grade galvanized with all fittings and laying in trenches for cable protection complete all as specified and directed.

S&F ceiling rose PVC /polycarbonate body 3 terminals with base plate ISI marked.

S&F socket outlet 2 in 1, 5 amps, 3 pin, 230v complete all as specified and as directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 40 Amp in the MCB DB complete with connection testing and commissioning.

S&F LED Tube Light fitting, 20 watt, CDL, 230 Volts, 4 feet long, Trim Linea complete with all accessories internally prewired and including connecting upto ceiling rose with 0.5 sqmm twin core copper flexible conductor cable includinf LED lamp and mounting casing box 2 Nos + E12 any type all as specified and as directed by Engineer-in-Charge.Make: Crompton cat part No. LCTLN-20-CDL or equivalent from approved list of make circulated By E-in-C.

Supply, laying in trenches and testing of UG cable 16 sqmm 04 core XLPE insulated screened,PVC bedded galvanised steel strip or wire, armoured heavy duty electric power cable with stranded aluminium conductor 1100 volts including taking down existing unserviceable cable complete all as directed and specified.

Suppy install test and commissioning outdoor type LT panel(CPRI approved) confirming to relavent IS factory fabricated made out of 3 mm thick out door type CRCA sheet duly powder coated & suitable size to accomodate all accessories / fittings with suitable size of copper power wire and angle iron frame with following accessories comparmentlize in construction to accomodate incoming /outgoing Cables and connecting copper wire including foundation for fixing angle iron frame for panel. comprising of the following :-(a) TPN MCB 63 Amps -01 (b) SPN MCB 40 Amp-3 mps -03 Nos (c) MCB SP 6-32 Amps, 10KA (d) Indication lamp RYB -01 set. (e)Ammeter & Voltmeter each one (f) Aluminium bus bar (g) one digital timer (g) one power contactor MNX 32 A 240 Volt all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm of make Almonard with and including making hole to wall of requried size and aluminium frame work for fixing exhaust fan and making good of existing surface complete all as directed and specified by Engineer-in-Charge.(Note: Rate quoted shall be inclusive of making hole in the wall and S&F of aluminium frame of required size)

N AND G CONSTRUCTION

M/S JAYCONSTRUCTION CO

Shri Sant Cosntruction

AJINKYA VIKRAM GAIKWAD