Improvement works to Primary Crusher House 1 building in West side and South side walls and drains in ICHP area at TTPS

Amount

Providing two legged scaffolding for average building height 10m., using 10 to 13 cm dia casuarina props, the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal & transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick & 1m width, etc. including cost of all materials, labours, lead, lift, safety measures, etc. complete.

Providing Brick work in CM 1:5 using Class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with C.M 1:5, 12 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete

Supplying and providing 5.5mm plain glass for windows after removing the damaged glasses including fixing all other accessories such as 8mm U channel screws glass putty including cost of labour charges lead, lift, etc., complete

Painting two coats with ready mixed enamel paint for the old steel surface including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, etc. complete.

Providing two coats of snowcem for the old outer walls including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete

Providing two coats of Acrylic distemper of approved quality, brand & colour for old ceiling & inner wall surfaces including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete

Supplying and providing water proof treatment over the existing roof slab with polymeric asphalt membrane sheet (4kg/cm2) constituting 7 layers with thermo fusible HM HDFE film one at top and other at bottom layer of this polymeric mix 1 layer of fibre glass tissue, 2 layers of polymeric mix on the top and bottom of 90 microns HM HDPE film, cracks on roof slab to be filled with cement based filter, laying of PAM sheets over a coating of 90/15 hot blown bitumen with 100mm over lap sealed by LPG flame torch further coated with oxides bitumen 90/15 and finally coated with aluminium coating and also extra attention should be given in roof / drain curve portion as per instruction of site Engineer including cost of all labour, lead, lift, T& P etc complete.

SEETHALAKSHMI ENTERPRISES