Construction of 40 bed RPF Barrack at WRS/Raipur. (This work primarily includes a G+1 Building of size 43M X 34M)

sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. // All kinds of soil. 2.27 22.00 cum 2161.20 47546.40 (-) 20.49 37804.14

watering, ramming, consolidating and dressing complete. 2.25 527.00 cum 253.95 133831.65 (-) 20.49 106409.54

plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 2.26.1 75.00 cum 104.50 7837.50 (-) 20.49 6231.60

banking excavated or stacked materials. // All kinds of soil 4.1.5 122.00 cum 6833.40 833674.80 (-) 20.49 662854.83 Description:- CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in

up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 4.11 3.00 Sqm 452.25 1356.75 (-) 20.49 1078.75

course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). 4.1.2 130.00 cum 7783.65 1011874.50 (-) 20.49 804541.41 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Description:- CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 7 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Per bag of 4.12 2760.00 cement of 57.15 157734.00 (-) 20.49 125414.30 50kg 8 Description:- CONCRETE WORK // DAMP-PROOF COURSE // Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. 5.33.1.1 175.00 cum 8683.80 1519665.00 (-) 20.49 1208285.64 Description:- REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing

the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works upto plinth level // Concrete of M25 grade with minimum cement content of 330 kg /cum 5.33.2.1 280.00 cum 10306.20 2885736.00 (-) 20.49 2294448.69 Description:- REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing

the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works above plinth level upto floor V level // Concrete of M25 grade with minimum cement content of 330 kg /cum 5.9.1 140.00 Sqm 307.95 43113.00 (-) 20.49 34279.15

including strutting, propping etc. and removal of form for // Foundations, footings, bases of columns, etc. for mass concrete 5.9.6 440.00 Sqm 804.25 353870.00 (-) 20.49 281362.04

including strutting, propping etc. and removal of form for // Columns, Pillars, Piers, Abutments, Posts and Struts 5.9.5 860.00 Sqm 608.35 523181.00 (-) 20.49 415981.21

including strutting, propping etc. and removal of form for // Lintels, beams, plinth beams, girders, bressumers and cantilevers 5.9.3 850.00 Sqm 766.55 651567.50 (-) 20.49 518061.32

including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform 5.9.7 20.00 Sqm 657.75 13155.00 (-) 20.49 10459.54

including strutting, propping etc. and removal of form for // Stairs, (excluding landings) except spiral-staircases 5.9.19 180.00 Sqm 814.95 146691.00 (-) 20.49 116634.01

corbels etc., including edges 5.12 5.00 cum 9673.50 48367.50 (-) 20.49 38457.00 Description:- REINFORCED CEMENT CONCRETE // PRE-CAST RCC // Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses,

required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 5.30 300.00 Metre 64.70 19410.00 (-) 20.49 15432.89

expansion joints with iron screws as per design. // Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 5.35 147.00 Quintal 688.45 101202.15 (-) 20.49 80465.83

cement in the items of design mix over and above the specified cement content therein. 6.1.2 50.00 cum 6658.25 332912.50 (-) 20.49 264698.73

of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand) 6.32.2 500.00 cum 8190.90 4095450.00 (-) 20.49 3256292.29

modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : // Cement mortar 1:6 (1 cement : 6 coarse sand) 8.2.2.1 30.00 Sqm 4679.35 140380.50 (-) 20.49 111616.54 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab upto 0.50 sqm 8.2.2.2 80.00 Sqm 4425.35 354028.00 (-) 20.49 281487.66 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of colour black, Cherry/Ruby red // Area of slab over 0.50 sqm 8.5 10.00 Each 808.15 8081.50 (-) 20.49 6425.60 Description:- CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20

mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 8.31 400.00 Sqm 1063.45 425380.00 (-) 20.49 338219.64 Description:- CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of

by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9.23 110.00 Sqm 401.40 44154.00 (-) 20.49 35106.85

board etc. : // Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 9.46.3 60.00 Metre 482.30 28938.00 (-) 20.49 23008.60 Description:- WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing

brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : // 25 mm dia 9.74.2 33.00 Each 300.55 9918.15 (-) 20.49 7885.92

brass tower bolts (barrel type) with necessary screws etc. complete : // 200x10 mm 9.75.2 36.00 Each 259.80 9352.80 (-) 20.49 7436.41

brass door latch with necessary screws etc. complete : // 250x16x5 mm 9.88 18.00 Each 817.50 14715.00 (-) 20.49 11699.90 30 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 30 Description:- WOOD AND P.V.C. WORK // CHROMIUM PLATED BRASS FITTINGS // Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 9.90.2 24.00 Each 286.30 6871.20 (-) 20.49 5463.29

fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. // Size 50 mm 9.91 24.00 Each 122.50 2940.00 (-) 20.49 2337.59

fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 9.92.1 33.00 Each 226.50 7474.50 (-) 20.49 5942.97

fixing chromium plated brass handles with necessary screws etc. complete: // 125 mm 9.82 14.00 Each 109.60 1534.40 (-) 20.49 1220.00

brass hanging type floor door stopper with necessary screws, etc. complete. 9.84 14.00 Each 856.30 11988.20 (-) 20.49 9531.82 Description:- WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing aluminium

3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 9.114.2 80.00 Each 34.15 2732.00 (-) 20.49 2172.21

magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. // Double strip (horizontal type) 9.116 40.00 Each 17.65 706.00 (-) 20.49 561.34

sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 9.135.2 60.00 Sqm 1051.75 63105.00 (-) 20.49 50174.79 Description:- WOOD AND P.V.C. WORK // Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm

and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. // With 12 mm mild steel U beading 9.166.1 250.00 Sqm 1215.75 303937.50 (-) 20.49 241660.71 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing

approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). // 18 mm thick 9.167 100.00 Sqm 902.55 90255.00 (-) 20.49 71761.75 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing

approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 9.171 120.00 Each 226.75 27210.00 (-) 20.49 21634.67 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing

make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 9.172 80.00 Set 749.70 59976.00 (-) 20.49 47686.92

stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. 9.174 120.00 Metre 38.45 4614.00 (-) 20.49 3668.59 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing

shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. 10.25.2 3000.00 Kg 142.30 426900.00 (-) 20.49 339428.19 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.28 400.00 Kg 612.25 244900.00 (-) 20.49 194719.99 Description:- STEEL WORK // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making

complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.20.2 350.00 Sqm 1160.00 406000.00 (-) 20.49 322810.60 Description:- FLOORING // TILE FLOORING // Chequerred precast cement concrete tiles 22 mm

shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). // Medium shade pigment using 50% white cement 50% Grey cement 11.39 50.00 Sqm 1142.80 57140.00 (-) 20.49 45432.01 Description:- FLOORING // CERAMIC GLAZED TILES // Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of

Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41A.3.1 250.00 Sqm 1311.05 327762.50 (-) 20.49 260603.96 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. // Glazed Vitrified tiles Matt/Antiskid finish of size // Size of Tile 600 x 600 mm 11.41.2 500.00 Sqm 1416.65 708325.00 (-) 20.49 563189.21 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm 11.56.1 72.00 Sqm 3908.80 281433.60 (-) 20.49 223767.86 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all

base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. // Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 12.21.1 110.00 Metre 260.20 28622.00 (-) 20.49 22757.35

(1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : // In 75x75 mm deep chase 12.41.2 400.00 Metre 319.75 127900.00 (-) 20.49 101693.29 Description:- ROOFING // Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of

Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameter 12.41.1 200.00 Metre 213.00 42600.00 (-) 20.49 33871.26 Description:- ROOFING // Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of

Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 75 mm diameter RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 12.42.5.2 20.00 Each 132.00 2640.00 (-) 20.49 2099.06 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/

jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degrees // 110 mm bend 13.2.1 3700.00 Sqm 339.70 1256890.00 (-) 20.49 999353.24

rough side of single or half brick wall of mix : // 1:4 (1 cement: 4 fine sand) 13.8.2 100.00 Sqm 406.10 40610.00 (-) 20.49 32289.01

cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : // 1:4 (1 cement: 4 fine sand) Per bag of 13.21 300.00 cement of 60.55 18165.00 (-) 20.49 14442.99

Description:- FINISHING // PEBBLE DASH PLASTER // Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 13.26 4860.00 Sqm 214.30 1041498.00 (-) 20.49 828095.06

mm thickness over plastered surface to prepare the surface even and smooth complete. 13.47.1 2000.00 Sqm 162.35 324700.00 (-) 20.49 258168.97

exterior paint with Silicone additives of required shade: // New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.83.2 3100.00 Sqm 121.55 376805.00 (-) 20.49 299597.66 Description:- FINISHING // Wall painting with premium acrylic emulsion paint of interior grade,

manufacture, including applying additional coats wherever required to achieve even shade and colour. // Two coats 14.12 16.00 Each 468.40 7494.40 (-) 20.49 5958.80 Description:- REPAIRS TO BUILDING // Providing and fixing 16 mm M.S. Fan clamps of standard

bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 16.8.1 300.00 Metre 49.90 14970.00 (-) 20.49 11902.65

excavation, refilling and disposal of surplus earth lead upto 50 metres : // With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 16.3.10 527.00 cum 888.30 468134.10 (-) 20.49 372213.42 63 Description:- ROAD WORK // ROADS // Supplying and stacking at site. // Moorum 17.1.1 4.00 Each 5781.35 23125.40 (-) 20.49 18387.01 Description:- SANITARY INSTALLATIONS // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 17.2.1 5.00 Each 5540.55 27702.75 (-) 20.49 22026.46 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal

cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid 17.31 8.00 Each 1411.15 11289.20 (-) 20.49 8976.04

mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.80 5.00 Each 7004.45 35022.25 (-) 20.49 27846.19 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post

fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer- in-charge. RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 18.8.2 120.00 Metre 513.75 61650.00 (-) 20.49 49017.92 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. // 20 mm nominal dia Pipes 18.10.2 60.00 Metre 373.35 22401.00 (-) 20.49 17811.04

fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 20 mm dia nominal bore 18.10.3 150.00 Metre 491.20 73680.00 (-) 20.49 58582.97

fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 25 mm dia nominal bore 18.12.6 120.00 Metre 654.20 78504.00 (-) 20.49 62418.53

fittings including trenching and refilling etc.-External work // 50 mm dia nominal bore 18.48 8000.00 Litre 9.70 77600.00 (-) 20.49 61699.76 Description:- WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and

and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.46.3 2.00 Each 369.35 738.70 (-) 20.49 587.34

fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : // 25 mm nominal bore 18.46.6 2.00 Each 706.70 1413.40 (-) 20.49 1123.79

fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : // 50 mm nominal bore 18.17.1 12.00 Each 532.35 6388.20 (-) 20.49 5079.26

C.I. wheel of approved quality (screwed end) : // 25 mm nominal bore 18.17.4 4.00 Each 878.25 3513.00 (-) 20.49 2793.19

C.I. wheel of approved quality (screwed end) : // 50 mm nominal bore 18.58.1.2 30.00 Each 45.25 1357.50 (-) 20.49 1079.35

PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. // 25 mm nominal bore, 152mm long, weighing not less than 440 gms 19.32.1 1.00 Each 28029.15 28029.15 (-) 20.49 22285.98 Description:- DRAINAGE // Extra for depth beyond 45 cm of brick masonry chamber : // Making

S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. // With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 21.1.1.1 160.00 Kg 433.95 69432.00 (-) 20.49 55205.38 Description:- ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and

free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // For fixed portion // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.2.1 160.00 Kg 531.80 85088.00 (-) 20.49 67653.47 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Description:- ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and

free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.3.2 45.00 Sqm 1325.55 59649.75 (-) 20.49 47427.52 Description:- ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 22.14.3 21.00 cum 13378.15 280941.15 (-) 20.49 223376.31

mortar 1:4 (1cement : 4 coarse sand) 22.22A 418.00 Sqm 474.15 198194.70 (-) 20.49 157584.61 Description:- WATER PROOFING // Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105

waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. 26.86.5 90.00 Metre 1000.15 90013.50 (-) 20.49 71569.73 Description:- NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed

(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. // Frame size 65 x 100 mm 26.86.6 26.00 Metre 1247.70 32440.20 (-) 20.49 25793.20 86 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 86 Description:- NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. // Frame size 65 x 125 mm 26.88.1 78.00 Sqm 4327.70 337560.60 (-) 20.49 268394.43 Description:- NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) // 30 mm thick 26.88.2 32.00 Sqm 4929.80 157753.60 (-) 20.49 125429.89 Description:- NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) // 35 mm thick 26.89.1 32.00 Sqm 2714.15 86852.80 (-) 20.49 69056.66 Description:- NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) // 18 mm thick 26.90.2 30.00 Sqm 1543.95 46318.50 (-) 20.49 36827.84 Description:- NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) // 12 mm thick 5.22.6 17800.00 Kg 89.65 1595770.00 (-) 20.49 1268796.73 91 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.22A.6 28500.00 Kg 89.65 2555025.00 (-) 20.49 2031500.38

for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () B-Execution of all works connected with above work covered under 297432.00 Below/P CPWD-HORTICULTURE 2020-Ver-1 and vol.I & IIof CPWD specification. ar 2.2 60.00 cum 515.60 30936.00 AT Par 30936.00

including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). 2.4.3 60.00 cum 319.90 19194.00 AT Par 19194.00

from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : // Screened through sieve of I.S. designation 4.75 mm 2.8 60.00 cum 52.35 3141.00 AT Par 3141.00

good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). 2.9 120.00 cum 36.55 4386.00 AT Par 4386.00

required proportion specified or directed by the Officer-in-charge 2.19.1 300.00 Metre 396.90 119070.00 AT Par 119070.00 Description:- HORTICUTURE AND LANDSCAPING // Edging with bricks laid dry length wise,

neatly within a lead of 50 m : // Common burnt clay F.P.S (non modular) bricks of Class designation 7.5 2.30.1 60.00 Each 257.60 15456.00 AT Par 15456.00 Description:- HORTICUTURE AND LANDSCAPING // Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded

shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. // Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm 2.31.6 60.00 Each 22.25 1335.00 AT Par 1335.00 Description:- HORTICUTURE AND LANDSCAPING // Filling of the following size empty pots with

and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) // Size of Empty Pots 25cm Top dia, 15cm Bottom Dia & 25cm Perpendicular height. 2.33 300.00 Sqm 214.40 64320.00 AT Par 64320.00 Description:- HORTICUTURE AND LANDSCAPING // Providing and laying Neelgiri/Mexican grass

with tools wooden (Dhurmos) and then rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge 3.18 40.00 Each 157.85 6314.00 AT Par 6314.00

having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. 3.31 60.00 Each 85.10 5106.00 AT Par 5106.00

Golden (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge. 4.3 40.00 Each 54.35 2174.00 AT Par 2174.00 11 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 11 Description:- SEASONAL PLANTS // Winter Seasonal plants // Providing and Displaying Antirrhinum Hybrid Dwarf variety (3 in one) well developed with fresh & healthy Flower multi branch in full bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge 7.10 40.00 Each 180.00 7200.00 AT Par 7200.00

girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.16 40.00 Each 65.00 2600.00 AT Par 2600.00

9.4 50.00 Each 40.00 2000.00 AT Par 2000.00 Description:- CREEPER PLANTS // Providing and stacking of Bougainvillea (Variety Butiana, Lady

Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.13 40.00 Each 40.00 1600.00 AT Par 1600.00

to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () C-Execution of all works connected with the above work covered under 778665.93 Below/P Schedule-C. ar NS 8.00 Each 5823.00 46584.00 7.00 49844.88

contractor's materials and labours and as per direction of Engineer in charge. NS 8.00 Each 1424.00 11392.00 7.00 12189.44

contractors materials and labours and as per direction of Engineer in charge. NS 8.00 Each 1141.50 9132.00 7.00 9771.24

contractors materials and Labours and as per direction of Engineer in charge NS 8.00 Each 1486.00 11888.00 7.00 12720.16

with contractors and materials and labours and as per direction of Engineer in charge NS 9.00 Each 2028.00 18252.00 7.00 19529.64

make with contractors materials and labours and as per dirction of Engineer in charge. NS 6.00 Each 1554.80 9328.80 7.00 9981.82

contractors materials and labours and as per direction of Engineer in charge. NS 4.00 Each 2122.00 8488.00 7.00 9082.16

and labours and as per direction of Engineer in charge. NS 8.00 Each 3892.00 31136.00 7.00 33315.52

contractors materials and labours and as per direction of Engineer in charge. NS 8.00 Each 1742.00 13936.00 7.00 14911.52

materials and labours and as per direction of Engineer in charge. RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY NS 13.00 Each 1807.80 23501.40 7.00 25146.50

materials and labours and as per direction of Engineer in charge. NS 15.00 Each 1489.00 22335.00 7.00 23898.45

and as per direction of Engineer in charge. NS 8.00 Each 5639.00 45112.00 7.00 48269.84

materials and labours and as per direction of Engineer in charge. NS 2.00 Each 13001.00 26002.00 7.00 27822.14

materials and labours and as per direction of Engineer in charge. NS 120.00 Each 643.50 77220.00 AT Par 77220.00

make with contractor's material, labour & as per direction of Engineer-in-charge. NS 9.00 Each 3349.50 30145.50 AT Par 30145.50

material, labour & as per direction of Engineer-in-Charge. NS 12.00 Each 2058.00 24696.00 AT Par 24696.00

labours and as per direction of Engineer in charge. NS 36.00 Each 1489.00 53604.00 AT Par 53604.00

material, labour & as per direction of Engineerin-Charge NS 15.00 Each 4037.00 60555.00 AT Par 60555.00

make (PRODUCT CODE 8220) with contractor materials and Labours and as per direction of Engineer -in-charge. NS 15.00 Each 2387.00 35805.00 AT Par 35805.00

(product code 8221) with Handle set of Godrej/similar make with contractor's materials and labours and as per Direction of Engineer-in-charge. NS 5.00 Each 2167.00 10835.00 AT Par 10835.00

CHR077)With contractors materials, labours and as per direction of Engineer-in-charge. NS 4.00 Each 1617.00 6468.00 AT Par 6468.00

3573P with contractor's material, labour & as per direction of Engineer-in-Charge. NS 1.00 Job 182854.12 182854.12 AT Par 182854.12 Description:- Making supplying & providing of General Arrangement Drawing detailed design structural drawing architectural drawing landscaping drawing and estimate consultancy with preliminary activities like final location, Geotechnical studies for construction of building and other structures/elements in connection with Construction of 40 bed RPF barrack at WRS/Raipur. Items briefly involved are:1.Preparation of concept plan in consultation with concern railway authority for Construction of 40 bed RPF barrack at WRS/Raipur as per Railway's Unified standard schedule of Rates, showing clearly the location of different rooms, reception counter, kitchen, cafeteria, care takers room, other service buildings, electrical sub-stations, roads, sewerage drainage landscaping,

routes, fire fighting arrangements etc.2.Preparation of master plan for the provision of extension in second phase of RPF barrack of similar volume. 3.Preparation of finalization of detail working drawings(Architectural & structural) and in consultation with railway authorities.4.Working out the total requirement water consumption, designing the various component of complete water system, preparation and finalization of working drawing.5.Preparation and finalization of detail working drawing, reception counter, cafeteria, other service buildings, caretakers room, Drainage, sewerage, roads, street lighting electrical sub-station, electrical &communication cable routes internal wiring diagram etc. 6.Geo-technical and soil investigation for structural designing and detailed structural designs and drawings for all components of the civil engineering structures. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () D-Execution of all works connected with above work covered under SEC Above/ Railway USSOR 2010 and Vol. I & II of IR unified standard specification (Works & 98990.40 Below/P materials) ar RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Description:- Hiring of JCB Machine (in good working condition) for leveling and dressing ground /

JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site.