ADDN ALTN TO MES BLDG NO P 2 ADM BLOCK AT 318 MED REGT AT FARIDKOT MIL STN

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.

M&L vetrified ceramic tiles 10mm thick (square/rectangular) light shade, polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L vetrified ceramic tiles 10mm thick (square/rectangular) light shade, polished, area of each tiles not exceeding 0.36 Sqm, in skerting etc set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick back coat in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified as directed by Engr-in- Charge

S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work. (Highlighter shall be provided as directed by Engr-in-Charge)

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

S&F Powder coated Aluminium frame for doors, window/partitions/ventilator with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge.

S&F Powder coated Aluminium window/ventilator shutter (glazed and gauzed both),side hung type / sliding without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos) for each shutter, hinges type B-21 100mm long (02 Nos) for each shutter, suitable handle (02 No) for each shutter with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: All fittings shall deemed to be included in quoted rates. Only Glass and wiremesh will be measured and paid seperately in supply only rates.

S&F Powder coated Anodised aluminium door shutters (sliding or side hung), aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, tower bolt, hinges,rollers, anodised aluminum snap beading screws etc. with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: All fittings shall deemed to be included in quoted rates. Only Glass and wiremesh will be measured and paid seperately in supply only rates.