Shifting of Lines

Amount

1-Chaianage No 00+00 Decentralise Materials (Provided by contractor)

X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Alluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp with nut and bolt

E Bracket with Bolts and Nuts

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

Clamp for LT T-Off with nut and bolt

MS Channel (T-OFF) 125x65x1300 mm

LT cable 4x16 Sq MM

Distribution box (D.B)

Clamps for D.B.

Clamps for T/F

Eye bolt for service cable

1- WORK (Chaianage No 0+000) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Carriage, loading shifting and unloading of existing T/F Safely from existing place to shifted place lifting by crane.

Installation of Existing 10 KVA T/F with complete materials and fitting

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Single pole on PCC Pole 8.5 mtr.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

2-Chaianage No 09+212 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Alluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

E Bracket with Bolts and Nuts

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

2- WORK (Chaianage No 09+212) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided by contractor)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Single pole on PCC Pole 8.5 mtr.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

3-Chaianage No 09+570 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Alluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

3- WORK (Chaianage No 09+570) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided by contractor)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Single pole on ST Pole 11 mtr.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

4- Chaianage No 09+680 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

4- WORK (Chaianage No 09+680) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided by contractor)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

5- Chaianage No 11+400 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

5- WORK (Chaianage No 11+400) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided by contractor)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

6- Chaianage No 12+240 Decentralise Materials (Provided by contractor)

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

6-WORK (Chaianage No 12+240) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

11 KV X-arm

11 KV Polymer Pin Insulators

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

7- Chaianage No 12+529 Decentralise Materials (Provided by contractor)

3x120 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

E bracket with clamp & nut –bolt

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

7-WORK (Chaianage No 12+529) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x120 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Laying of 11 KV 3x120 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand. as per site requirement HDD method can be used.

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

8- Chaianage No 18+486 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

8-WORK (Chaianage No 18+486) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided by contractor)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

9- Chaianage No 21+340 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

9-WORK (Chaianage No 21+340) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials. (provided by contractor)

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

10- Chaianage No 26+800 - 27+000 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

3x185 mm² XLPE C/J kit straight through 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

LT ABC clamp

I hook

I clamp

LT Suspension clamp

Neutral PRC

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

Distribution box complete

Eye bolt

Clamp for LT T off

MS angle (T/F base) 75x75x6x2027 mm

Clamp for DB box

Clamp for T/F

10-WORK (Chaianage No 26+800 - 27+000) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

ACSR weasel conductor

3x185 mm² XLPE cable 11 KV

LT AB cable 3x120+1x95+1x16 mm²

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

LT Shackle Insulator

2x10 mm² LT cable

4x16 mm² LT cable

New 25 kva T/F

3.5x70 mm² LT Cable

ST Pole 9 mtr

Installation of distribution box complete work

Laying of 11 KV 3x185 (3124)/ 3x120(130) mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1.1M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required.

Digging the existing cable loop and ready for jointing of straight through

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Cable jointing charges of 11 KV XLPE Cable Outdoor/Straight through

Labour charge complete for ABC Cable laying.

Disconnection and Reconnection of Existing LT cable connection in the path of Shifting of line as per follwoing details. -

L.T. and Domestic Consumer connection cable.

Commercial and Power Consumer Connection cable.

Erection of Single pole structure on 11mtr ST. (SP-55) Pole for 11 KV and LT AB Cable hanging including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire, earthing, LT clamp, shackle insulator, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Single pole structure on 9 mtr ST Pole for LT AB Cable hanging including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (suspension clamp, I hook, I clam, danger board with clamp, Aluminium paint, red oxide paint, barbed wire, earthing, LT clamp, shackle insulator, etc. complete).

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Laying, spreading, lifting of ACSR weasel conductor as a neutral conductor and other work.

Installation of new 25 kva T/F with complete fitting and all related testing and commissioning.

Carriage, loading shifting and unloading of existing T/F Safely from existing place to shifted place lifting by crane.

Installation of Existing 10/16 kva T/F with complete fitting and all related testing and commissioning.

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Double Pole 11mtr. ST Pole.

Dismentling charges of existing Single pole on PCC Pole 8.5 mtr.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old and damaged 11 KV/LT Line materials from work site to Store Gorkahpur Distt. Gorakhpur.

Earthig of T/F complete

11- Chaianage No 27+200 Decentralise Materials (Provided by contractor)

X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Alluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp with nut and bolt

E Bracket with Bolts and Nuts

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

Clamp for LT T-Off with nut and bolt

MS Channel (Dropper) 125x65x2240 mm

Holding clamp for dropper

MS angle (T/F base)75x75x6x2028) mm

LT metering incoming panel

Al. lug 150 mm²

Cu. Z clamp

11-WORK (Chaianage No 27+200) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

3.5x150 mm² LT cable

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Carriage, loading shifting and unloading of existing T/F Safely from existing place to shifted place lifting by crane.

Installation of Existing 25 KVA T/F with complete materials and fitting

Earthing of T/F complete

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Single pole on PCC Pole 8.5 mtr.

Dismentling charges of existing Double pole on PCC Pole 8.5 mtr.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

Disconnection and Reconnection of Existing LT cable connection in the path of Shifting of line as per follwoing details.

L.T. and Domestic Consumer connection cable.

Commercial and Power Consumer Connection cable.

12- Chaianage No 36+100 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

3x185 mm² XLPE C/J kit straight through 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

12-WORK (Chaianage No 36+100) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

2x10 mm² LT Cable

4x16 mm² LT Cable

Laying of 11 KV 3x185 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1.1M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required.

Digging the existing cable loop and ready for jointing of straight through

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Cable jointing charges of 11 KV XLPE Cable Outdoor/Straight through

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Double Pole 11mtr. ST Pole.

Dismentaling of old ACSR DOG / weasel conductor and rolling in pieces.

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Shifting, Loading, Carriage & Unloading of old and damaged 11 KV/LT Line materials from work site to Store Gorkahpur Distt. Gorakhpur.

13 Chaianage No 36+200 Decentralise Materials (Provided by contractor)

3x185 mm² XLPE C/J kit outdoor 11 KV

11 KV X-arm clamp

‘F’ Bracket with Bolts and Nuts

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire

Aluminium Paint

Red Oxide Paint

Bolts, Nuts & Washers

Earthing Rod

GI wire

11 KV Top Channel

11KV Bracing angle

clamp for above with nut and bolt

PG Clamp as suitable Dog/ Weasel conductor

11 KV Stay rod (20x1600) mm

11 KV Stay clamp for ST Pole

Stay wire 7/10 SWG

MS angle for cable support

clamp for above with nut and bolt

13-WORK (Chaianage No 36+200) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

ST Pole 11 mtr

ACSR Dog conductor

3x185 mm² XLPE cable 11 KV

11 KV X-arm

11 KV Polymer Pin Insulators

11 KV Disc Insulator T&C Type

11 KV Disc Fitting

Extra cost for drilling horizontal hole 4 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 11 KV XLPE cable 3x185 mm² for Link Exprssway Crossing at different places in the path of Laying of cable. (All require materials provided by contractor)

Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete.

Cable jointing charges of 11 KV XLPE Cable Outdoor

Labour charges for making loop (with brick and Sand), inserting of MS Pipe, Rising of 11 KV cable and jumpering with conductor complete work

Special Pipe Earthing Complete for Cable jointing Kit with materials

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Dismentling charges of ACSR Dog/Weasel conductor.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

M/S SHUKLA ENTERPRISES

INDIA SUPPY CORPORATION