PROVN OF SHED WITH HARDSTANDING FOR STAKING OF FOL PRODUCTS UNDER AGE B/R-II AT GE JHANSI

Amount

Surface dressing n. exc 15 cm deep and getting out hard/dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard/dense soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete in post hole complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. Notes: (a). Item No. 04 will include Roof Truss, Purlin, Vertical Support, Runner, Bracings etc. made of square/rectangular hollow sections. (b). The roof truss will be fabricated at ground on painted layout marking and will be hoisted with help of suitable crane to fix on vertical MS support . Rates quoted for this will include cost of crane and no separate payment will be done for that. (c). Welding work will be carried out with heavy duty oil cooled arch welding machine 400 Amp or above using welding electrode (welding rod) having dia not less that 4 mm.

Supply and fix mild steel screw bolts, nuts, washers (machine made) with hexagonal head at one end and screwed the other end, each screwed end to be fitted with two washers and one hexagonal nut, dia of neck 20 mm, length of bolt exc 50mm but n. exc 100mm long, complete all as specified and directed.

S&F of Fe 410-W (Gde-E-250) quality - A mild steel plates, plain or chequered , 5mm thick or over in thickness in available sizes complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as sepcified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for hardcore using broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for 75 mm thick PCC type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in flooring and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in flooring and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

A K ENTERPRISES (BID ID -3154566)

Dubey Construction Company (BID ID -3149014)

M/S Nextage Construction (BID ID -3149059)

AGRASEN ENTERPRISES (BID ID -3149208)

M/s Jagdish Chandra Arora (BID ID -3148723)

M/S ARVIND SINGH THEKEDAR (BID ID -3154420)

M/S VAIBHAV ENTERPRISES (BID ID -3148577)