REPAIRS TO PATH, INTERLOCKING TILES AND OTHER MISC B/R WORKS AT C ZONE UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as directed.

Dismantling of fencing any type all as directed.

Excavating in post holes (Or similar) each n exc 0.5 Cum getting out returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L Steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only galvanised chain link fencing of size 100mm x100mm mesh made out of 10guage mild steel ganvanised wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire etc complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

S&F Mild steel screw bolts(machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only mild steel in flat, round or square bars, in available lengths as in line wire Fe 410-W(gde-E-250) quality-A complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc., all as directed.

M&L for 100 mm thick cement concrete 1:3:6, type C- 2 using 40mm graded crushed stone aggregate as in subbase of floor complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C- 2 using 40mm graded crushed stone aggregate as in floor, sub-base, plinth complete complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in floor, sub-base, plinth etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L Sand cushoning under interlocking paver block, floors or in foundations including watering and consolidation complete all as specified and directed.

Dismantling of stone slabs and tiles, including paver blocks etc of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. including screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in copping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required complete all as specified and directed.

M&L for PCC 1:2:4, type B1 20mm graded crushed stone aggregate as in curb stone and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No 29.00 here-in-before but except bricks

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc., complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and directed. (Note : WPC shall be measured and paid seperately in relevant item of SCH 'A'/BOQ).

Supply only liquid water proofing compound complete all as specified and directed.

M&L preparation of new plastered surfaces of wall, etc and applying two coat of cement base paint any tint over a coat of cement primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of primer on new/old plastered/ concrete surfaces over 10 cm width or girth including preparation of surfaces.

Demucking of filled soil in drains of any size depth or section in any condition as per site requirement and spreading away road side berms complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) to plastering for drain etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate asin walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate as in surface channel & drain including form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc. complete all as specified and directed.

Ditto all as per item No 42.00 here-in-before add or deduct for each 25 mm girth or part thereof over or under 30cm

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 MPA yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvamised self drilling self-tapping fastener (12-14 x 55 with EPDM seals ) complete all as specified and directed.

S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 MPA yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvamised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc all as directed.

Dismantling of timber scantling 40 Sqcm or over in section in any position unframed work all as directed.

Dismantling of timber scantling but fillets rails, posts rafters, purlins etc under 40 Sqcm in section unframed works all as directed.

M&L Roof trusses trussed, purlins, Rafter, crane gantries, rails and fastenings, caging for water tank, stair case and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including necessary welding, febrication Fe-410W(GdeE-250) quality-B complete all as specified and directed.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding, febrication Fe-410W(GdeE-250) quality-B complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 51,702.63 (refer Tender Srl Page No 25). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

SRI A B SEN

M/S Joy Construction

J T ENTERPRISE

M/S Vaishno Constructions

M/S SEN CONSTRUCTION

M/S R. K. INDUSTRIES