SPL REPAIR TO GUARD ROOM BOUNDARY WALL OF BAFFLE RANGE AND SPL REPAIR TO SECURITY FENCING FROM CP1 TO CP 7 AT NAMS

Amount

Taking down Chowkhat or frame not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhat or frame not exc 4 Sqm and exc 1.5 each with shutters (without taking off shutters from the frames) complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as spd

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturer's complete all as specified all as specified.

S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 75mm long cold rolled mild steel medium weight butt hinges welded or screwed to steel, aluminium and wooden chawkhat complete all as specified and directed.

S&F 100mm long cold rolled mild steel medium weight butt hinges welded or screwed to steel, aluminium and wooden chawkhat complete all as specified and directed.

S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.

S & F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 incl 12mm square guard bar 10cm c/c and two coat of synthetic enamel paint over one coast of primer complete all as specified and directed. Note : Including taking down old steel ventelator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

Dismantling of brick works in cement mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.

Description as pewr item No 18 above but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as spd and directed.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkaly resistant primer complete all as specified and directed.

M&L for two coat of Exterior weather proof emulsion paint over one coat of alkali resistance primer incl preparation of new plasterd surface in camouflage pattern including necessary colours complete all as specified and directed. Note : Colour and make as approved by Engr-in-Charge Note- Colour and pattern will be decided and approved by Engr-in-charge or Garrison Engineer.

M&L for preparation of new or previously untreated wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying one coat of white wash on ceiling surface etc incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds etc, & filling necessary putty where required as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for applying Two coat of exterior emulsion weather proof as in camouflage pattern on walls, pillars, cornices etc surcafes by Mechanicaly operated spray gun machine incl complete removal of existing treatment of old plastered/concrete surfaces by electrical operated grinder machine incl filling necessary where required with putty as in pathces or nail holes to obtain smooth finish using sand paper complete all as specified and directed. Note-1. Entire spalashes in floor shall be cleaned immediately after completion of periodical services. 2. Colour pattern of camouflage will be approved by Garrison Engineer

M&L for one layer of compound of altek/birla putty 2mm thick on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

Material and labour for preparation of old steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 100 mtrs where directed complete all as specified and directed.

Demolition of reinforced cement concerete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, Type C-2 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement incl contraction (Dummy) joints 25 mm deep x 10mm wide at every 3 mtr long and filled with sealing compound Grade 'B' complete all as specified and directed.

M&L for plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in haunching, coping , benching etc complete all as specified and directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 22-25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry including demolition of old tiles complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tiles exceed 0.06 sqm but not exc.0 .11sqm , in floors etc laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or Coloured cement to match incl dismantiling of old tiles of any discription or thickness with backing coat as in wall complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantiling of stone slab and tiles of any discription or thickness in floors / aprons with screed bed etc complete all as specified and directed.

M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantiling of old tiles of any discription or thickness with backing coat as in wall complete all as specified and directed.

M&L for 200mm bore dia RCC Class NP3 pipes laid and jointed with collar incl dismantling of old pipe by excavation, digging, bearking up etc, complete all as specified and directed.

M&L Plain cement Concrete 1:3:6, TypeC2, bed to drain pipes of size200mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as spd

M& L for Use & waste of formwork to sides and soffits of floor or roof beam, lintel beams flat surface etc incl supports, overhangs etc complete all as specified.

M& L for Use & waste of steel props and supports to soffit of old suspended slabs of any thickess such as roof slabs, floor slabs, cantilever slab and similar work at minimum spacing of supports @ 750mm centre to centre flat or sloping slab complete all as specified and directed by Engr-in-charge. Note- All safety measured of employees to be provided by the contractor at site and any damage to the man and materials will be fully responsible of contractors.

M&L RCC 1:2:4, Type B1 (Using 20mm graded aggregate) as in Slabs supported on walls,beams/lintel , landings,balconies, canopies, deck slabs and shelves complete all as spd

M&L TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Quality confirming to FE 500D complete all as spd

Description all as per item No-51 but 6 to 8 mm dia and including in stirrups, spacers and binders and complete all as specified.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 complete all as specified and directed.

S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 complete all as specified and directed.

S&F 500 ltr capacity triple layered rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) hoisted and fixed in position all as per SSR part-I incl 20mm bore ball valve PVC high pressure with palythene float and flynut incl taking down/dismantling of old pvc tank complete all as specified and directed.

S & F in repairs viterous china wash hand basin white, flat back of size 550x 400cm incl GI brackes of required length, brass chromium plated waste coupling & 32mm bore PVC waste pipe (corrugated) of appropriate length and making necessary connections complete all as specified and directed

S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan 'orissa pattern size 580x440 white with integral foot rests incl `P' or `S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete and making good to floor complete all as specified and directed.

S&F 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.

S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed.

S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore dia fancy type chromium plated long shank and cup stop valves (Concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F in repair 15mm bore dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as spd(minium weight of 300gms)

S&F of 20mm Ball valve high presure of standard of PTMT any coloured with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as spd

Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M & L for 75mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,hunching, sub base floor complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:3) over 25 mm thick screed bed in cement morter 1:4 and flush pointing as work proceed complete all as specified and directed.

Description all as per item above -75- but except bricks tiles complete all as specified and directed.

S&F in repairs 22 mm dia powder coated MS pipe as in curtain rod incl brakcets , knobs etcs complete all as specified and directed.

S&F of 75mm PVC (SWR) Nahani/floor trap, plain with grating including jointing with solvent cement complete all as spd

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

Dismantling of galvanized mild steel two strand barbed wire from old existing mild steel, RCC fencing posts, security wall fencing etc. complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type A-1 1:1.5:3 (20mm graded aggregate) in Columns, pillars, piers, etc complete all as specified and directed.

M & L for Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of complete all as specified and directed.

Material and labour for 5mm thick cement plaster in CM 1:3 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

Dismantling post or struts (wood, steel or RCC) any section embeded in concrete or brick work masonary, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and directed.

Fixing only serviceable Mild steel work in posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed. Note- Serviceable material obtained under serial item No.90 shall be re-use..

S & F Mild steel work in posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire of be measured) complete all as specified and directed. Note-Sample of Barbed wire to submitted for approval of EIC/GE before execution of above item.

Description all as per item No-93- but fixing only complete all as specified and directed. Note-Serviceable material obtained under serial no. 86 shall be re-use.

M&L two coats of synthetic enamel paint over a coat of red oxide primer over steel surfaces including preparation of new surface complete all as specified and directed.

M&L two coat of synthetic enamel paint over steel surfaces including preparation of old surface complete all as specified and directed.

M & L for 2 coats of cement base paints on walls including preparations of newly plastered surfaces complete all as specified and directed.

ELECTRICAL ITEMS Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FR unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit not less than 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick hylem sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes including 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc complete all as specified and directed. Note : The costs of PVC conduit, sunken box and bakellite sheet are included in the quoted rate)

All as per item No 99 for one three pin socket outlet 5 Amps independent board complete

All as per item No 99 for one three pin 5 Amps socket outlet on the same board with other switches

All as per item No 99 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacement of switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in repalacement of ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and Fixing in replacement of fan regulator, electronic step socket type heavy duty 230 volts complete all as specified and as directed.

M&L in replacemnt of lamp holder insulated body with back plate angle type for batten fitting fixed on bakelite sheet 100mmx100mm with 10 Watt LED Bulb 230V AC cool day light 6500K complete all as specified.

S&F in replacement of sheet steel enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.

M & L out door type aluminuam bus bar chamber feeder box of cap 300 Amp , 3 phase, 4 wire, 415 Volts with porcelain insulator of size 90 x 60 x 45 cm made out of 3.15 mm CRCA Sheet duly painted with two coats of synthetic enameld paint over a red oxide primer and fixed and supported with anlge iron grouted in PCC 1:2:4 upto 0.30 mtr high from ground level all as directed by Engr-In-Charge.

Supply and fixing in replacement of MCB single pole 6 to 32 Amps all as specified and directed

Supplying and fixing in replacement of MCB DP 40 - 63 Amps 240V, 10 KA, complete all as specified and as directed

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply & fix in replacement of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. Make:C&S INDUS series CAT part No LTESS18X2.5HPLED/LS or equivallent models of makes mentioned in Appendix 'B'.

Supply and fixing in replacement of bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts etc for street light all as specified vand direceted.

Supply & laying in replacement of XLPE insulated armoured heavy duty electric cable with aluninium conductor 1100 volt grade cross section area 4 core 25 sqmm .

Excavation trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for and getting out in any of soil.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size50 mm outer dia and 38 mm inner dia

Supply and fixing in replacement of LED T-8 tube light fitting with single side connection LED tube rod 18/20W 4 feet 1 x 18/20 watt MS CRCA box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing ceiling fan 1200mm sweep, of 5 star rating complete all as specified and directed .

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and laying or fixing 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections one twin core 6 Sqmm cable standard conductor cable flat or circular all as specified and directed by Engineer- in- Charge.

Supply & Fixing flood Light Luminaire 150 watt with .high power SMD LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,pressure die cast LM6 diffusor:injection model polycarbonate,powdre coated in IP 66 Incliding protection over temperature should be from the same manufacturer Product Make:C&S CAT part No LTEFI150WHPLED or equvallent model of makes mentioned in Appendix 'B'.

S &F in replacement of LED bulk head light fittings 10watt white including LEDstrip as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified

M/s Vijay Construction Co.

tarlok singh contractor

TARSAM LAL SAINI CONTRACTOR