For Providing Shifting 2nd Call. P. A. C. 1501738.00 on Electrical SOR 01-01-2024 and Non SOR, Completion period 60 Days (i/c rainy season)

For Providing Shifting of 33 KV/ 11 KV/ LT Line at Gandhi Tiraha Near Rajbhavan, PHQ Square. Sabban Square, Bhopal (Detail Schedule Attached)

SECTION 4

BILL OF QUANTITIES (BOQ)

General Description of work : For Providing Shifting of 33 KV/ 11 KV/ LT Line at Gandhi Tiraha Near Rajbhavan, PHQ Square. Sabban Square, Bhopal 2nd Call. P. A. C. 1501738.00 on Electrical SOR 01-01-2024 and Non SOR, Completion period 60 Days (i/c rainy season)

Probable Amount of Contract :

(Rs. In Figure) :-

(Rs. In Words) :-

S. No. & SOR No

Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal - magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2

Supply of support for overhead line RS joist of I.S. standard including drilling of required hole etc. complete as required.

Supplying and drawing all aluminium alloy conductor (AAAC) of approved make conforming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)

Supplying and drawing of stranded aluminium conductor steel reinforced (ACSR) conforming to IS:398-1976 of approved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (if any) etc.

Supplying, drawing and testing of XLPE insulated covered aluminium conductor of approved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (if any) etc.

Supplying and drawing guard wire/earth wire/bearer wire 13 sq mm (4mm. dia) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting & cradle etc. as required and clearing of obstacles (if any)

Supplying and drawing guard wire/earth wire/bearer wire 18.62 sq mm (4.87mm. dia/6swg) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting & cradle etc. as required and clearing of obstacles (if any)

Supplying and erection of guards for existing overhead lines as required including split insulator required as per specification:

Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole of length exceeding 10 metres but not exceeding 15 metres in cement concrete M-10 (1 cement:3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling etc. as required.

Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole strut in cement concrete 1:3:6 (1cement:3coarse sand: 6 aggregate 40mm nominal size) foundation including excavation and refilling and secured with holding clamp, nuts and bolts, etc. as required.

Supplying and erection of stay set complete with 19/20mm.dia 1.8 metre long stay rod, turn buckle, anchor plate of size 300mm x 300mm x 7.5mm thimble stay clamp, bow tightener, 7/4.00 dia G.I. stay wire etc. in cement concrete M-10 (1 cement: 3 coarse and: 6 granded stone aggregate 40mm nominal size) (concreting 0.30 Cu Mtr. per stay) foundation including excavation and back refilling etc. as required.

Supplying and erection of stay set complete with 16mm.dia 1.8 metre long stay rod, turn buckle, anchor plate of size 200mm x 200mm x 6.0mm, stay clamp, bow tightener, 7/3.15 dia G.I. stay wire etc. in cement concrete M-10 (1 cement: 3 coarse and: 6 granded stone aggregate 40mm nominal size) (concreting 0.30 Cu Mtr. per stay) foundation including excavation and back refilling etc. as required.

Supplying and erection of 11KV (5 KN) polymer pin insulator complete with long steel head G.I. pin, nut, washer etc. as required.

Supplying and erection of 11KV (45 KN) Polymer disc insulator for 11KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts washer etc. as required.

Supplying and erection of 33KV (10 KN) polymer pin insulator complete with long steel head G.I. pin, nut, washer etc. as required

Supplying and erection of 33KV (45 KN) polymer disc insulators for 33KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts, washers etc. as required.

Supplying and erection of single piece nonlinear resistor polymer type lighting arrestor (set of 3 nos) for 3 wire, 11KV overhead lines/sub-station with rated voltage of 9KV (rms) with a nominal discharge current rating of 10 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washer etc. as required.

Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On-Off position conforming to IS complete with required material and installing on existing DP structure to complete the job as required as per specification.(Set of 3 nos.)

Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure as required.

Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per MPMKVVCO. Specification.

Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per specification.

Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure/poles.

Shifting, erection, & commissioning of 25/63/100/200/315/500 KVA (11/0.433 KV) distribution transformer on existing structure including Bi-metallic clamp, ACSR/AAAC Conductor i/c colour code sleeve, for connection from H.T. Line to transformer as required as per specification.

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below –

Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size.

Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size.

Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below –

Providing and fixing earthing arrangement with 38.1mm dia 2.5 metre long galvanized iron pipe electrode including packing of charcoal powder and salt as per specification watering pipe 19mm dia G.I. connection, cover plate having locking arrangement on the top etc. complete with refilling the pit as required, including excavation of earth pit in soil / soft rock

Supply and laying 25mm X 5mm G.I. strip at 0.5 metre below ground level as strip earth electrode including jointing etc. as required.

Dismantling of existing H- Beam/RS Joist/PCC/Rail pole i/c accessories such as cross arms, top clamp, V-cross arms, strut, stay & conductor/cable/guarding span complete. The material should be transport & handed over to MPMKVVCL/PWD store.

Supply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.

Collection and spreading of metal dust, murum and 40mm graded hard metal in sub-station yard or as required as mentioned below -

Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for for D.P. structure electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required. The panel frame with required angle iron/ flat iron members/cross members including mesh welded in frame panel shall be erected between the posts. The angle iron post shall be erected in cement concrete M-15 (1:2:4) (20 mm graded metal) foundation, including excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.

Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.

Painting of poles such as Hbeam/RS J/Vcross arm Top clamp/ other allied fittings with one coat of primer Red oxide paint and two coat of Aluminium Paint complete as required as per specification

All items below are taken From MPPWD PIU Electrical SOR wef 01.01.2024

Supply & fixing of High Breaking Capacity (HBC) Fuse Links knife (DIN) type as per IS : 13703 : 1993 & IEC : 60269 :1986 with 80 kA breaking capacity of approved make

125 Amp to 160 Amp

NON SOR

NON SOR 1

Sub Total Total Rs.

Executive Engineer PWD E/M Division No. 1, Bhopal