Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC MHN 284 DRIVER HILL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹15.9 L+₹1.2 L (7.85%)Rejected-AOC FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹16.0 L+₹1.3 L (8.70%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹16.1 L+₹1.3 L (9.10%)Rejected-AOC SHOP NO 6 GROUND FLOOR SHRI KRISHANA BUILDING OPP NANKING HOTEL VASCO DA GAMA GOA 403 802 | VASCO DA GAMA | SOUTH GOA | GOA | 403802 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹16.3 L+₹1.6 L (10.7%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
27 Jul 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANATAK
GARRISON ENGINEER GOMANTAK VASCO DA GAMA PIN 403802
Repairs to Wooden Doors Windows and Rolling Shutters in certain Buildings at NOFRA-I and II under AGE BR-II GE Gomantak Vasco
2022_MES_535240_1
8448/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
Refer tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹30,000
30 Sept 2022
1 Jul 2022
28 Jul 2022
1 Jul 2022
27 Jul 2022
21 Jul 2022
Amount
Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge.
Taking down wooden Chowkhats or frames exc. 1.5 sq.m and n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.
S&F for hold fast made out of 25x3 mm MS flat iron.
M&L PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in coping, bed plate etc complete.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.
M&L for one coat of alkali resistant primer on plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed
S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.
S&F factory made 2nd class H/W 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F 2nd class H/W 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F 150 mm long Aluminium handles, cast type (ISI marked).
Supplying 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed
Supply and fixing in repair of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed
M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.
Taking down,easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws,etc and refixing in same opening , shutters of any description exc 1 sqm and n exc 2 sqm each Shutters of any description all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S & F in repair butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F in repairt 150 mm long Aluminium handles, cast type (ISI marked).
Supplying 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed in repair complete.
M&L two coats of synthetic enemel paint on new wooden surface over a coat of pink primer incl necessery preparation.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 fixed with fasteners.
S&F aluminium powder coated frame and shutters for patition / windows/ ventilators/doors sliding/fixed/openable type complete with necessary fittings such as two aluminium handle cum lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge.
Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.
S& F Sheet glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S&F figured glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh.
S&F in repair aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh.
S & F Steel rolling shutters with 1.00mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified & directed
M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.
M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed.and specified.
S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.
S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified.
S & F 100 mm long Aluminium handles, cast type (ISI marked).
S&F pvc door bottom weather strip door brush sweep seal fixed complete all as specified and directed.
M/S jvsr constructions
Paulraj Painters And Civil Engineering Contractors
M/s. R.S. LAWANDE
K M SUBHANAIAH
M/S. NAVEEN ENGINEERING & CO
Leela Enterprises
M/s VEEJEE ENTERPRISES
JINTECH
M/S DUBAL CONSTRUCTION
Tara Construction
AATREYA CONSTRUCTION
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .