Electrical work for "Rewiring of staff quarters with latest scale of fittings along with Copper wiring for 2nd phase in Colony area PLW/PTA

1-Point Wiring:- Supply, wiring/rewiring, testing & commissioning of LED

For Type-III quarter

For Type-IV quarter

For Type-IV (S) quarter

For Type-V quarter

2-Light Plug Point wiring:- Supply, wiring/rewiring, testing &

For Type-III quarter

For Type-IV quarter

For Type-IV (S) quarter

For Type-V quarter

3-Power Plug Point Wiring:- Supply, wiring/rewiring, testing &

For Type-III quarter

For Type-IV quarter

For Type-IV (S) quarter

For Type-V quarter

4-AC Plug Point Wiring:- Supply, wiring/rewiring, testing and

For Type-III quarter

For Type-IV quarter

For Type-IV (S) quarter

For Type-V quarter

5-Geyser Plug Point Wiring:- Supply, wiring/rewiring, testing &

For Type-III quarter

For Type-IV quarter

For Type-IV (S) quarter

For Type-V quarter

6-Call Bell:-Supply & fixing of call bell gong type as per technical

For Type-III quarter

For Type-IV quarter

For Type-IV (S) quarter

For Type-V quarter

7-Main Circuit with 2X 6 sq. mm:- Supply, wiring/rewiring, testing and

For type- III, IV, IV (S) & V quarters

8-MS boxes:- Supply & erection of MS boxes of sizes as given below as

9-Staircase/(Two way) light point:-

Supply, wiring, rewiring, testing & commissioning of staircase/two way light point in staircases of different quarters along with FRLS/FRLSH, multi strand Copper conductor wire PVC insulated, 1100 V grade, ISI marked size 1.5 sq mm. for phase & neutral separately for each circuit 9 from switch board to point without joint in circuit and 14 SWG bare Copper conductor wire for earth continuity in PVC conduit pipe (against item No. 11) or already laid MS/PVC conduit pipe along with all accessories such as 5 amp piano type white switches, 2.8/3.0 mm thick (hylem) white Bakelite sheet, cup washers, brass/steel screws, junction box cover etc. as per technical specifications and site requirements.

10-Bulk Head fitting:-

Supply, Installation, testing and commissioning of Bulk head light fitting suitable for installation of 7-8 W LED lamp complete with all accessories, ready to install at site in different quarters as per technical specifications and site requirements.

11-PVC Conduit Pipe:-

Supply, laying & fixing of ISI marked PVC conduit pipe 25 mm dia to be concealed in wall/on wall surface where as required along with all accessories such as PVC pipe bends, junction boxes, junction box covers, steel saddle clamps, steel screws etc. complete in all respect as per technical specifications and site requirements.

12-1 in 1 Metal Meter Boxes:-

Supply and erection of 1 in 1 Metal Meter Boxes (cabinets) for incorporating single phase energy meters as per technical specifications and site requirements.

13-MCBs DP 'C' Curve 32 A:-

Supply, Installation, connection, testing, and commissioning of MCB DP 32 Amp 'C' Curve in SDB as per technical specifications and site requirements.

14-MCB SP 'C' Curve 6-32 A:-

Supply, Installation, connection testing, and commissioning of MCB SP 6-32 Amp 'C' Curve in SDB as per technical specifications and site requirements.

15-Ceiling Fan Regulator:-

Supply,erection, testing and commissioning of Electronic fan regulator for ceiling fans as per technical specifications and site requirements.

16-Excavation of trench under soft soil:-

Excavation of trench under soft soil minimum 1 meter deep & 400 mm wide for laying of PVC/XLPE aluminium armoured cables of all sizes as per site requirement and provide sand 16 cushioning of 75 mm thick layer around the cable and top protection with class B bricks, (the sand, bricksetc are in the scope of the tenderer). The trench to refilled back after laying of cable, ramming, levelling and watering the excavated area after laying of cable to bring the surface to original level as per technical specifications and site requirements.

17-Excavation of trench in pucca area 1 meter deep & 400 mm wide for

Excavation of trench in pucca area 1 meter deep & 400 mm wide for laying of XLPE aluminium armoured cables of all sizes as per site requirement and provide sand cushioning of 80 mm thick layer around the cable and top protection with class B bricks and repair the site to same as 17 it is original shape (the sand, bricks cement etc are in the scope of the tenderer). Digging of pucca/concrete soil with the help of bockie for crossing the roads/pathways/pucca surface area etc. The hole of bockie shall be 1000 mm below the top surface of the road and providing and laying of HDPE hume pipe of required size to run through the powersupply cables. (The supply of HDPE pipeis under the scope of the tenderer) as per technical specifications and site requirements.

18-Laying of LT cable of size 4CX50 sq. mm:-

Laying of PVC/XLPE, armoured, Aluminium conductor LT cable of size 4CX50 sq. mm in the existing excavated trench/through Hume pipe/GI pipe/HDPE pipe as per technical specifications and site requirements.

19-3" dia G.I. pipe:-

Supply & laying of 3" dia G.I. pipe, ISI marked as per technical specifications and site requirements.

20-SDB 16 way:-

Supply, Installation, testing and commissioning of SBD 16 way provided with 100 amp. insulated phase bus bar, neutral link/bar, earth terminal and duly wired, blanking plates etc. as per technical specifications and site requirements.

21-Power Distribution Board:-

Supply, installation, testing and commissioning of TP&N, double door Main 21 Distribution Board comprising of the followings as per technical specifications and site requirements: (i) 4 pole MCCB 100 A as incomer -01 No. (ii) DP MCB 63 A 'C' series- 03 No. (iii) SP MCB 6-32 A 'C' series- 18 No. (iv) Neutral link - 01 No. (v) Danger Plate - 01 No. (vi) Busbar arrangement - 01 set