CA NO CWE/PAT/T-35/2019-20 SPECIAL REPAIR TO BUILDING NO P-108 (12 QUARTERS) AT OLD CANTT UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian ( TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH).

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian ( TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH).

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian ( ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR).

Supply only integral liquid water proofing compound complete all as specified and directed.

S&F factory made flush shutters 35mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC celuka Board wooden finish pre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of coloured tiles as approved, over & incl. set and jointed 20 mm thick screed in cement mortar (1:4) and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150mm, set and jointed over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.

Providing and Laying Premium (1st) quality straight edge, ceramic tiles WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & incl and over 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F vitreous china premium/1st quality wash basin half pedestal, white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Hindware / Cera / Jaquar / Parryware

S&F vitreous china premium/1st quality wash down water closet Pan (Pedestal pattern / EWC) S/P trap white colour of size 520 x 360 x 390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe, etc., with flush pipe 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing including taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) / Hindware (Slick) / Equivalent from Parryware.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) / Cera (Corona) / Prayag (Vintage).

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified. Make PRAYAG / POLYTUFF / SHAKTI

S&F 6mm thick looking mirror beveled edge fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish, etc.complete fixed in position all as specified and directed.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. Make : Cera / Hindware / Jaquar.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Prayag / Neelkanth / Nirali / Diamond

Disconnecting existing water tanks of 500 ltrs capacity, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting, reconnecting and incl S&F PVC water tank cover & 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the water tank complete all as specified and directed.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. Note : The extra area of 300mm around the actual affected area will be checked and repaired and only repaired portion will be taken for measurement.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make : Sika / STP / Fosroc.

M&L for 20-22mm thick precast plain cement concrete tiles type B-1, 1:2:4 (12.5mm graded aggregate) as in floorings, roofing set in cement mortar 1:4 over and including 15mm th screed bed in CM 1:4 complete all as specified.

Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified. Note : 1. The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sika / STP / Fosroc.

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified. Note : 1. The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sika / STP / Fosroc.

Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. Note : 1. The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sika / STP / Fosroc.

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness. Yield: approx. 0.84 ltr/kg. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm Note : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item. Make : Sika / STP / Fosroc.

S&F 18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single rigid laminated of approved colour and other side plain white colour fixed with screws and solvent cement/ adhesive to make kitchen cabinet shutter and shelves complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with Stainless Steel screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 6 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs.

S&F Piano / continuous Hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F 5 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single rigid laminated of approved colour and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

Chipping of unsound weak concrete / cover of reinforcement over slab, column and walls as per site requirement by chieseling maximum upto 30mm depth and removal of rubbish off the premises complete all as directed by Engineer in Charge.

S&F stainless steel tubing of 25 mm dia chromium plated 1 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets fency type, stops etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Fixing only tube light fitting LED type retrofit T-8, 20 Watts 4 ft long including LED tube rod and including 3 core flexible wire 0.5 sqmm copper cable all as specified and directed.

Fixing only tube light fitting LED type integrated 9/10 watt , 4 ft long including LED tube rod and including 3 core flexible wire 0.5 sqmm copper cable all as specified and directed.

Supply and Fix bulk head fitting LED type including 1 x 9/10 watt LED Lamp flexible wire 0.5 sqmm copper cable all as specified and directed. Note : Bulk head fitting will be issued from store yard of MES

S & F LED security light fitting 30-35 watt,complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as pecified and directed.

Taking Down and refixing ceiling fan after necessary cleaning complete all as specified and directed.

AR CONSTRUCTIONS

M/S RAJ KUMAR GUPTA

m/s panchmukhi builders

FAVOURITE ENGINEERS

Buttar Construction Co.

Norton Builders

Swami Engineers

Vipin Kumar and Brother