EEE Lab Equipments

Transformer Oil Breakdown Voltage(BDV) Test KIT- Input Supply: 230 V ac, Single Phase, 50 Hz Output Voltage Range: 0–60 kV ac Suitable for testing dielectric strength of transformer insulating oil Oil test cup with standard electrodes Transparent safety hood provided over test chamber Electrode gap adjustable as per standard testing requirements Interlocking safety switch for hood protection Automatic tripping protection provided Tripping current: 10/20mAat 2.5mm electrode gap HT ON switch with zero-voltage start facility Sample transformer oil to be provided with test kit.

ACIDITY TEST KIT -Ethyl alcohol Sodium carbonate solution Universal indicator solution Laboratory-grade test tubes Droppers Color comparison chart for test result comparison Chemicals supplied in labeled containers with safety instructions Suitable for laboratory educational and testing applications

SIGNAL GENERATOR - Frequency Range: 0.1 Hz to 5MHz. Display: 4 to 6 Digit LED Display Output Waveforms: Sine, Triangle, Square, ±Pulse, ±Ramp. Amplitude: 0 –20 Vp-p. Rise Time: <100ns. Distortion :<1% (within acceptable range of frequencies). Power Supply: AC 220 V ±10%, 50-60 Hz Output Amplifier Protection: Protected against Short Circuit and ±15V Overload DC Offset: 0to±10V adjustable Attenuation: 0 to –60 dB

DSO - Bandwidth:50-100MHz. Sampling Rate: 1GS/s. Channels: 2(minimum) PowerSupply:100V–240VAC,50-60Hz Automatic Measurement: Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, +Width, -Width, +Duty, - Duty etc., HorizontalScale:5ns/div–50s/div or equivalent VerticalResolution:8bits(2Channels simultaneously) VerticalSensitivity:1mV/div –10V/div(ati nput) Waveform Math; +,-,x, ÷ ±invert, FFT etc., Waveform Storage: 16 waveforms or equivalent Communication Interface: SB Host, USB interface. 7-inch color display or equivalent Input impedance- 1MΩ±2%,//20pF 2× passive probes (1X/10X)

• +5 V dc, 1 A regulated power supply. • ±12 V dc / ±15 V dc, 200 mA regulated power supply. • Solderless breadboard with minimum 840 tie- points,power distribution buses. • ZIF (Zero Insertion Force) IC sockets to accommodate 8 or 16 pin ICs. • Logic input and output LEDs for output monitoring. • 16 buffered LED outputs. • 16 debounced switch inputs. • Variable clock generator: 0.5 Hz to 50 Hz. • Single pulse output: 100 ms (buffered, positive and negative outputs). • One seven-segment display with 4 BCD inputs. • Built-in logic switches. • Manual clock: Debounced push-button (one pulse per press).